ADTRAN 3060 - Manual
ADTRAN 3060 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – REVISION HISTORY; Warranty and Customer; Figure 2; for LTU edge connector wiring.; Figure 2. LTU Edge Connector Wiring
- Page 6 – Menus; For abbreviations used in the screen diagrams, see; Table 2
- Page 8 – Figure 8; , which will display the Access Modules; Figure 8. Access Module Menus Screen
- Page 9 – Figure 9; Performance Monitoring; Figure 9. HDSL Main Menu Screen
- Page 10 – The Provisioning Screen, as illustrated in; Figure 12. Network Source Screen; The Network Source Screen, illustrated in
- Page 11 – Figure 13. Status Screen
- Page 12 – and
- Page 14 – Figure 18. Protection Configuration Screen – Main; Figure 19. Protection Configuration Screen – Auxiliary
- Page 15 – Table 4. Protection Configuration Option Settings
- Page 16 – Figure 20. Set Circuit ID Screen
- Page 17 – illustrates the Alarm Options Screen. This; HDSL DEPLOYMENT GUIDELINES; length including bridged tap lengths is 2.7 km.; Figure 21. Alarm Options Screen
- Page 18 – Product specifications are detailed in; Table 4
- Page 19 – WARRANTY AND CUSTOMER SERVICE; International Equipment; Asia Pacific - Hong Kong
- Page 21 – Introduction; Slots 6 and 7 are not; N O T E; • Total Access 3010 chassis installed and wired,; INSTALL THE LTUs INTO TOTAL ACCESS; Gently but firmly push the LTU into the
- Page 23 – In Service; Placing the LTUs; DISABLING PROTECTION SWITCHING; Access the AUX LTU and select Option 2,
- Page 25 – UNPACK AND INSPECT THE THE TOTAL; INSTALL THE DS3 MUX MODULES; Install the DS3 MUX Module into Total; Ensure that Linked Provisioning is
- Page 26 – Logon to Total Access system.; Do not continue; Channel Mapping; W A R N I N G; independently of each other.; N O T E - A P S F a c e p l a t e P u s h b u t t o n -
- Page 27 – Provision the LTU
- Page 28 – AUX circuit, reset the AUX unit to; Logoff; Install the NTU into the Dual-Slot; DISABLING PROTECTION SWITCHING
- Page 29 – choose the; not
1
Section 61182007L1-5, Issue 1
61182007L1-5A
Section 61182007L1-5A
Issue 1, June 2001
Total Access
®
3010 LTU
High-bit-rate Digital Subscriber Line
Transceiver Unit for the Central Office
Installation and Maintenance
CONTENTS
1.
GENERAL ............................................................................ 1
2.
INSTALLATION .................................................................. 2
3.
OPERATION ........................................................................ 3
4.
HDSL SYSTEM TESTING .................................................. 4
5.
SCU CONTROL PORT OPERATION (HDSL) ................. 5
6.
HDSL DEPLOYMENT GUIDELINES ............................. 17
7.
MAINTENANCE ............................................................... 17
8.
PRODUCT SPECIFICATIONS ......................................... 17
9.
WARRANTY AND CUSTOMER SERVICE ................... 17
Appendix A.
HDSL H-LSS Circuit Configuration and Turnup
for G.703 Fed Systems .................................... A-1
Appendix B.
HDSL H-LSS Circuit Configuration and Turnup
for DS3-Fed Systems ...................................... B-1
FIGURES
Figure 1.
ADTRAN Total Access 3010 LTU ........................... 1
Figure 2.
LTU Edge Connector Wiring .................................... 2
Figure 3.
LTU Span Powering Diagram ................................... 4
Figure 4.
HDSL Loopbacks ...................................................... 5
Figure 5.
RS-232 (DB-9) Pin Assignments .............................. 5
Figure 6.
Logon Screen ............................................................. 7
Figure 7.
Total Access Screen ................................................... 7
Figure 8.
Access Module Menus Screen ................................... 8
Figure 9.
HDSL Main Menu Screen ......................................... 9
Figure 10. Configuration Screen ................................................. 9
Figure 11. Provisioning Screen ................................................. 10
Figure 12. Network Source Screen ........................................... 10
Figure 13. Status Screen ............................................................ 11
Figure 14. REG #1 Status Screen .............................................. 11
Figure 15. Alarms Screen .......................................................... 12
Figure 16. Test Screen ............................................................... 13
Figure 17. Performance History Screen .................................... 13
Figure 18. Protection Configuration Screen – Main ................ 14
Figure 19. Protection Configuration Screen – Auxiliary ......... 14
Figure 20. Set Circuit ID Screen ............................................... 16
Figure 21. Alarm Option Screen ............................................... 17
TABLES
Table 1.
Faceplate LED Indicators .......................................... 3
Table 2.
Screen Abbreviations ................................................. 6
Table 3.
LP1 and LP2 Guidellines ......................................... 12
Table 4.
Protection Configuration Option Settings ............... 15
Table 5.
Total Access 3010 LTU Specifications ................... 18
Table B-1. Faceplate LED Indicator ....................................... B-2
Trademarks: Any brand names and product names included in this document are
trademarks, registered trademarks, or trade names of their respective holders.
1. GENERAL
The ADTRAN Total Access 3010 HDSL Transceiver
Unit for the Central Office (LTU), part number
1182007L1, is the Central Office (CO) unit used to
deploy an HDSL E1 circuit using 4-wire metallic
facilities. See
Figure 1
.
The E1 input signal is supplied from the network via
individual G.703 lines or an E3 multiplexer. The
HDSL signals are provided to the local loop. The
Total Access 3010 LTU works in conjunction with the
ADTRAN NTU and REG to provide an E1 service up
to 9.4 km on the local loop.
The LTU works with multiple list versions of the
HDSL unit Remote end (NTU) and HDSL Range
Extender (REG) as listed below:
• 1245043Lx Low Voltage T400 REG
• 1245031Lx, Low Voltage T200 NTU
• 1245033Lx, Nx64 NTU
• 1245044L3, 4th Gen - T400 NTU
• 1245035Lx, 5th Gen - T200 NTU
The Total Access 3010 LTU can be deployed in
circuits consisting of one LTU and one NTU or in a
protection configuration requiring two LTUs and two
NTUs. When deployment requires the HDSL Range
Extender (REG), this LTU can be deployed with one
or two REGs and one NTU.
Figure 1. ADTRAN Total Access 3010 LTU
TX
M
O
N
E
Q
RX
TX
RX
ACT
A
P
S
GRN = NORM
YEL = MAN
LP1
TST
G703
PWR
LP2
ALM
LTU
1182007L1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Section 61182007L1-5, Issue 1 61182007L1-5A C A U T I O N ! SUBJECT TO ELECTROSTATIC DAMAGE OR DECREASE IN RELIABILITY. HANDLING PRECAUTIONS REQUIRED. The HDSL local loop operates as two independentsubsystems each operating over a single twisted pair.The LTU communicates over these two twisted pai...
6 Section 61182007L1-5, Issue 1 61182007L1-5A Many portable personal computers use power-savingprograms that are known to interfere with applicationsrunning on the personal computer. If using a portablepersonal computer with terminal emulation capability,communication between the computer and the HD...
8 Section 61182007L1-5, Issue 1 61182007L1-5A From the Total Access System Screen, select AccessModules by typing the number corresponding to theoption followed by <Enter>. This will display theAccess Module Menu Screen, illustrated in Figure 8 , which will display the Access Modules occupying...
