Page 2 - Canadian Standards Association; Warranties; ADTRAN will repair or replace this product within five years
FCC ID: HDC1203019L1 This device complies with Part 15 of the FCC rules. Op- eration is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. C...
Page 3 - FCC regulations require that the following information be
61203019L1-1 NT1 ACE User Manual iii FCC regulations require that the following information be provided in this manual: 1. This equipment complies with Part 68 of the FCC rules. On the bottom of the equipment housing is a label that shows the FCC registration number for this equipment. If requested,...
Page 4 - ISDN
iv NT1 ACE User Manual 61203019L1-1 work until the problem is corrected, or it is certain the equipment is not malfunctioning. 5. This unit contains no user-serviceable parts. 6. An FCC compliant telephone cord with a modu-lar plug is provided with this equipment. In addi-tion, an FCC compliant cabl...
Page 5 - READINESS DISCLOSURE; Web Site
61203019L1-1 NT1 ACE User Manual v ADTRAN YEAR 2000 (Y2K) READINESS DISCLOSURE ADTRAN has established a Year 2000 program to ensure that our products and operations will correctly function in the new millennium. ADTRAN warrants that all prod-ucts meet Year 2000 specifications regardless or model or ...
Page 6 - CANADIAN EMISSIONS REQUIREMENTS
vi NT1 ACE User Manual 61203019L1-1 CANADIAN EMISSIONS REQUIREMENTS This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard enti-tled "Digital Apparatus," ICES-003 of the Department o...
Page 9 - AFFIDAVIT REQUIREMENTS FOR CONNECTION; • An affidavit is required to be given to the tele-
61203019L1-1 NT1 ACE User Manual ix AFFIDAVIT REQUIREMENTS FOR CONNECTION TO DIGITAL SERVICES • An affidavit is required to be given to the tele- phone company whenever digital terminal equipment without encoded analog content and billing protection is used to transmit digi-tal signals containing en...
Page 10 - AFFIDAVIT FOR CONNECTION OF CUSTOMER
x NT1 ACE User Manual 61203019L1-1 AFFIDAVIT FOR CONNECTION OF CUSTOMER PREMISES EQUIPMENT TO 1.544 MBPS AND/OR SUBRATE DIGITAL SERVICES For the work to be performed in the certified ter-ritory of _______________ (telco name) State of __________________ County of ________________ I, ________________...
Page 12 - Transcribed and sworn to before me
xii NT1 ACE User Manual 61203019L1-1 ( ) C. An independent training course (e.g., trade school or technical institution) recognized by the manufacturer/grantee of the equipment used to encode analog signals; or ( ) D. In lieu of the preceding training require-ments, the operator(s)/maintainer(s) is ...
Page 13 - IMPORTANT SAFETY INSTRUCTIONS; Avoid using a telephone (other than a cordless; SAVE THESE INSTRUCTIONS.
61203019L1-1 NT1 ACE User Manual xiii IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons. The precautions are listed below. 1. Do not use this product near water (for e...
Page 15 - Table of Contents
61203019L1-1 NT1 ACE User Manual xv Table of Contents Unit Overview ............................................................... 1LED Indicators .............................................................. 2Passive Bus Description ................................................ 3Inspection ......
Page 16 - Figures
xvi NT1 ACE User Manual 61203019L1-1 Table of Contents Faceplate Indicators ...............................................13Network Compatibility ..........................................13Mechanical ............................................................13Power .................................
Page 17 - Unit Overview; The ADTRAN NT1 ACE provides a basic rate interface; Figure 1. ADTRAN NT1 ACE; Two jacks are provided on the rear panel of the unit for this; Figure 2. Interface Connectors; nect to the local bus.
61203019L1-1 NT1 ACE User Manual 1 NT1 ACE User Manual Unit Overview The ADTRAN NT1 ACE provides a basic rate interface between customer ISDN terminal equipment (TE) and the ISDN network (U). Figure 1 is an illustration of the NT1 ACE. Figure 1. ADTRAN NT1 ACE Two jacks are provided on the rear pane...
Page 18 - LED Indicators; Table 1. Status Indicators; LED
2 NT1 ACE User Manual 61203019L1-1 NT1 ACE User Manual The U-interface complies with ANSI T1.601 and ITU-TI.430 Recommendation Standard. The S/T-interface complies with ANSI T1.605 and ETSI ETS 300012 Stan-dard. The ADTRAN NT1 ACE is a stand-alone unit. An external power source must be provided for ...
Page 19 - Passive Bus Description; Passive Bus. See the section Short Passive Bus Configuration; Inspection
61203019L1-1 NT1 ACE User Manual 3 NT1 ACE User Manual If the ERROR indicator is not illuminated and the READY indicator is flashing, a network test is in progress. Network command tests cause a faster 8 Hz flash rate. Terminal equipment commanded tests produce a slower 1 Hz flash rate. Passive Bus ...
Page 20 - Maintenance; Figure 3. Switch Locations
4 NT1 ACE User Manual 61203019L1-1 NT1 ACE User Manual Maintenance The ADTRAN NT1 ACE requires no routine maintenance to operate. In case of equipment malfunction, refer to the sec- tions Remote Testing and Repair and Return or remove the unit and replace it with another unit optioned in an identica...
Page 21 - Powering TEs from the NT1 ACE on page 6 for more informa-; SHORT; Passive Bus Configuration; Table 2. Network Connector Pin Assignments; Pin
61203019L1-1 NT1 ACE User Manual 5 NT1 ACE User Manual The switch labeled TERMINATION sets the Local Bus ter- mination. The options available are NONE, 50, and 100. See Powering TEs from the NT1 ACE on page 6 for more informa- tion concerning Local Bus configurations. The switch labeled CONFIGURATIO...
Page 22 - Powering TEs from the NT1 ACE; Table 3. Local Bus Connector Pin Assignments; Powering with the NT1 Power Supply; No connection
6 NT1 ACE User Manual 61203019L1-1 NT1 ACE User Manual Powering TEs from the NT1 ACE The ADTRAN NT1 ACE can be used to provide power for TEs connected to the local interface. The NT1 ACE, part number 1203019L1, supplies power by a separate wire pair (PS2) on the two data jacks marked LOCAL, as shown...
Page 23 - POWER
61203019L1-1 NT1 ACE User Manual 7 NT1 ACE User Manual powered from the NT1, verify that the total power require- ment of the connected TE is less than 8.9 watts. To connect the NT1 ACE to the NT1 Power Supply, perform the following steps as illustrated in Figure 4. 1. Connect the Power Supply to th...
Page 24 - Connecting the Terminal Equipment; Option Switches on page 4. Plug the TE into one of the Local
8 NT1 ACE User Manual 61203019L1-1 NT1 ACE User Manual Connecting the Terminal Equipment After successfully powering up the NT1 ACE, the POWER and ERROR indicators should be on and the READY indica- tor should be flashing. Make sure that terminal equipment (TE) is properly terminated as instructed i...
Page 25 - Short Passive Bus Configuration
61203019L1-1 NT1 ACE User Manual 9 NT1 ACE User Manual Short Passive Bus Configuration This configuration allows you to connect up to eight TEs at any point on the bus. The bus length is limited to 600 feet, as shown in Figure 5. To select the Short Passive Bus configu- ration, the CONFIGURATION swi...
Page 26 - Extended Passive Bus Configuration; Figure 6. Extended Passive Bus Configuration
10 NT1 ACE User Manual 61203019L1-1 NT1 ACE User Manual Extended Passive Bus Configuration This configuration allows you to connect up to eight TEs at greater ranges than the Short Passive Bus. This group of TEs can be located at up to 3000 feet from the NT1, as shown in Figure 6. To select the Exte...
Page 27 - Troubleshooting; If your NT1 ACE does not operate properly, please check; POWER indicator does not illuminate.; Network activation failure:
61203019L1-1 NT1 ACE User Manual 11 NT1 ACE User Manual Troubleshooting If your NT1 ACE does not operate properly, please check the lists of symptoms and solutions below. For further assis- tance, please contact ADTRAN technical support at 888- 4ADTRAN. POWER indicator does not illuminate. • Verify ...
Page 28 - READY indicator does not illuminate.; • Problem with ISDN network: Contact telephone; • ISDN line not plugged into NETWORK jack: Plug; • TE is not compatible with ISDN network: Contact; Specifications
12 NT1 ACE User Manual 61203019L1-1 NT1 ACE User Manual READY indicator does not illuminate. • Problem with ISDN network: Contact telephone company. • ISDN line not plugged into NETWORK jack: Plug ISDN line into NETWORK jack. Unable to make or receive a call. • TE is not compatible with ISDN network...
Page 31 - Technical Support and Warranty Information; Presales Inquiries and Applications Support
Technical Support and Warranty Information Presales Inquiries and Applications Support Please contact your local distributor, ADTRAN Applications Engineering, or ADTRAN Sales: Applications Engineering 800) 615-1176 Sales (800) 827-0807 Post-Sale Support Please contact your local distributor first. I...
