ADTRAN 1 - Manual
ADTRAN 1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Technical Support 1-888-4ADTRAN (1-888-423-8726)
Configuring the
Total Access 900 Series
DSX-1 Interface
Quick Configuration Guide
61210916L1-42.4B
March 2006
The DSX-1 interface is located on the rear of the Total Access 900 Series products. It is labeled
DSX-1 T1 0/1
on the ADSL units and
DSX-1 T1 0/2
on all other units. The DSX-1 interface allows
DS0s to be provided to customer’s voice terminating equipment such as a PBX.
1. Start a VT100 terminal session to connect to your unit. If you need assistance, follow the
steps in the
Total Access 900 Series Quick Configuration Guide
(P/N 61210916L1-42.1).
2. Enter
enable
at the initial command prompt to access the Enable mode’s priviledged
commands.
3. Enter
configure terminal
to access the Global Configuration mode.
4. At the
(config)#
prompt, enter
interface t1 0/x
to access the interface configuration mode for
the DSX-1 interface.
5. Enter
description 12 Network to PBX
to provide a text description of the channels provided
to the DSX-1 interface.
6. Enter
tdm-group 2 timeslots 1-12
to create a TDM group of timeslots 1 through 12 on the
DSX-1 interface (
t1 0/x
).
7. Enter
no shutdown
to activate the interface.
8. Enter
exit
to return to the Global Configuration mode.
Please note that these examples are given for your study and consideration only.
They are to help you reach a better understanding of the fundamental concepts
before configuring your application. It will be necessary for you to modify these
examples to match your network configuration. Please replace all underlined entries
(
example
) with your specific parameters.
Please refer to the
ADTRAN Operating System (AOS) Command Reference
Guide
on your
ADTRAN OS Documentation CD
for detailed information on
individual commands and subcommands pertaining to the Total Access 900 Series
products.
DSX-1 Interface
Configuring the DSX-1 Interface
The following steps demonstrate configuring the DSX-1 connection. In the following steps,
please substitute
1
(ADSL units) or
2
(all other units) for
x
in
t1 0/x
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
