ADC ML-175 - Manual
ADC ML-175 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – American Dryer Corporation; Retain This Manual in a Safe Place for Future Reference; Only qualified technicians should service this equipment; FOR YOUR SAFETY; IMPORTANT; For your convenience, log the following information:
- Page 4 – Personal injury or fire could result.; Safety Precautions; Dryer must be exhausted to the outdoors.; Cleaning
- Page 5 – Days After Installation and Every 6 Months
- Page 6 – CAUTION; Compressed Air Requirements; Turn on electric power to the dryer.
- Page 9 – Main Door Switch
- Page 10 – Lint Drawer; WARNING; Personal injury could result.; Computer Controls; To Replace Computer; Disconnect electrical power to the dryer.
- Page 11 – Ignition Controls; To Remove HSI Ignitor
- Page 12 – To Replace Main Burner Orifices; To Test and Adjust Gas (Water Column) Pressure
- Page 13 – To Replace Burner Tubes; To Replace HSI Module / DSI Module; Thermostats
- Page 14 – Front Panel and Main Door Assemblies; To Replace Main Door Switch
- Page 15 – Pulleys; To Replace Drive Shaft Pulleys
- Page 16 – Bearings; To Replace Drive/Idler Shaft Pillow Block Bearings; Tumbler Alignment
- Page 17 – Rotational Sensor Switch Replacement; NOTE: Check belt adjustment and readjust if necessary.; To Replace Speed Reducing Shaft Bearings
- Page 18 – Basket and Support; To Replace Tumbler and Tumbler Support; Motors; To Replace Drive Motor
- Page 19 – To Replace Fan Shaft and/or Fan Shaft Bearings; Impellor; To Replace Lint Screen
- Page 20 – To Replace Lint Drawer Switch
- Page 23 – Air Jet Circuit Indicator – OPTIONAL; Phase 6 OPL Microprocessor Controller
- Page 25 – connected to L1; Example
- Page 26 – Data Label; Information on the Data Label; Using a Manometer; How To Use A Manometer; Attach manometer to dryer using magnet.; Tool List
ML-175 / ML-190
Service Manual
Phase 6 / Phase 7
Microprocessor Controls
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
ADC Part No. 450431 - 3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 American Dryer Corporation 450431 - 3 Retain This Manual in a Safe Place for Future Reference This product embodies advanced concepts in engineering, design, and safety. If this product is properlymaintained, it will provide many years of safe, efficient, and trouble free operation. Only qualified...
4 American Dryer Corporation 450431 - 3 ▲ WARNING ! Dry only water-washed fabrics. Do not dryarticles spotted or washed in dry cleaningsolvents, a combustible detergent, or “allpurpose” cleaners. Fire or explosion couldresult. Do not dry rags or articles coated with gasoline,kerosene, paint, or wax....
450431 - 3 www.amdry.com 5 Daily (Beginning) of each work shift. Clean lint from the drawer/screen. Inspect lint screen andreplace if torn. Weekly Clean lint accumulation from lint chamber, thermostat, andmicroprocessor temperature sensor (sensor bracket) area. ▲ WARNING ! To avoid the hazard of ele...
