AcuRite 972 - Manual
AcuRite 972 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – low battery level icons will illuminate.; CHOOSE WHERE TO PLACE THE MAIN UNIT and WIRELESS SENSOR; Choose wall mount or table-top placement.; Operating Range of Batteries; AA
- Page 3 – PREVIEW THE DISPLAYS; Press the “; NORMAL; WIRELESS; INDOOR; EXTREMELY LOW
- Page 4 – MAIN UNIT FEATURES; The unit starts synchronizing the clock after the 1st channel; Manually Setting the Time and Date:; and release; the “–; UNDERSTAND WHAT THE BUTTONS DO; MAIN UNIT; BUTTON NAME; BUTTON NAME
- Page 5 – MULTIPLE WIRELESS SENSORS; PRODUCT SPECIFICATIONS
Thank You! We appreciate you for purchasing the new generation radio-controlled
wireless weather station and atomic clock. This instrument is designed and engineered
with state-of-the-art technology and components. It will provide these accurate and
reliable measurements: date, time, and indoor/outdoor temperatures and humidity levels.
1 CHECK PACKAGE CONTENTS
(1) Main Unit – 7.25” x 2.75” x 1.5”*
(1) Wireless Sensor – dimensions: 2.5" x 3.5" x 1"*
(1) 10’* wired low temperature adaptor
(2) 1” (2.5cm) screws with plastic anchors
(1) Instruction manual
00972 INST0518-06
Instruction Manual
1
2 READ
Please read this entire manual carefully before you set up the instrument and begin to
use it. In this way you can become familiar with the features of the weather station &
clock to get the most benefit from it.
* dimensions approximate
Wireless Sensor
Wireless Weather Station
& Atomic Clock
Main Unit
MODEL # 00972
Wireless Sensor
with low
temperature
adaptor
T H E R M O H YG R O
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 INSTALL BATTERIES Main Unit: Always install batteries into the main unit first. On the back of the unit, remove the battery compartment cover. Insert 2 AA alkaline (or lithium – See NOTES below) batteries. Replace the cover. Wireless Sensor: After batteries have been put into the main unit, remove...
5 PREVIEW THE DISPLAYS 5 4 Wireless Sensor Display Press the “ MODE” button inside the back of the wireless sensor to display temperature and/or humidity in one of three ways: 1)Temperature continuously, 2)Humidity continuously, or 3)Temperature for 5 seconds, then humidity for 5 seconds NOTE: The s...
7 MAIN UNIT FEATURES Radio-controlled Clock : The unit starts synchronizing the clock after the 1st channel of the wireless sensor begins to send its information to the main unit. (This is called registration.) The built-in antenna receives the official time signal from the US Government's National ...
