Accton 16 - Manual
Accton 16 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Thin Ethernet; ) terminator to the open end of the “T” connector. If the BNC; Thick Ethernet
- Page 3 – EtherHub-16 Quick Start Guide; Providing Power to the Hub; and the other end into a power outlet.; Power; on the front panel to see if it is on. The unit automatically; System Configuration
- Page 4 – Hardware Description; terminators to the T-type connector on the BNC port.
- Page 5 – LED; Troubleshooting; Workstation’s network adapter, cable or hub port is defective.
- Page 6 – Jabber indicator lights up.; Specifications
- Page 7 – EMI Warning; FCC Class A Certification; You may use unshielded or shielded twisted-pair (100; electrostatic discharge whenever handling this equipment.
- Page 8 – Safety Compliance; Underwriters Laboratories Compliance Statement; Operating; UL Listed/CSA Certified Cord Set; Les raccordeurs ne sont pas utilisé pour le système téléphonique!
- Page 9 – oder Sprays verwenden, sondern ein angefeuchtetes Tuch.
- Page 10 – Copyright
EtherHub-16 Quick Start Guide
1
Smart Ethernet Hub with 16 RJ-45 Ports and 2 AUI/BNC Ports
This 10 Mbps Ethernet hub includes 16 RJ-45 ports on the front panel, and 2 AUI/BNC ports on
the rear panel. This hub can be operated in a stand-alone configuration, cascaded to other hubs,
or linked to one or more AUI/BNC backbones. This hub is suitable for desktop or rack-mount
installation, and supports full-range power input. The EtherHub-16 conforms to the IEEE 802.3
standard for local area networks based on CSMA/CD, and provides10BASE-T, 10BASE2 and
10BASE5 repeater functions including:
•
Signal amplification and retiming
•
Preamble regeneration and fragment extension
•
Automatic port partition and reconnection
Hardware Installation
The EtherHub-16 has 16 RJ-45 ports, of which Port 16 can serve as either a standard port or a
daisy-chain port. It also has two AUI/BNC ports. Use twisted-pair cable (100
W
STP or
UTP)
to
connect any standard RJ-45 (MDI-X) port to a server/workstation, or to connect the RJ-45 daisy-
chain port (i.e., Port 16MDI ) to another compatible hub or switch. You can also attach up to two
Ethernet LAN backbones by connecting thin coaxial cable to a BNC port or connecting thick
coaxial cable to an AUI port.
Making RJ-45 Connections
1. Prepare straight-through twisted-pair cable (100
W
) with RJ-45 plugs at both ends. The
length of each cable should not exceed 100 meters (328 feet).
I
Do not plug a phone jack connector into any RJ-45 port. This may damage the hub. Instead,
use only twisted-pair cables with RJ-45 connectors that conform with FCC standards.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
EtherHub-16 Quick Start Guide 2 2. If you are making a connection to an end-node device (e.g., a PC or server), be sure that it has a properly installed 10BASE-T network interface card. Attach one end of a straight-throughtwisted-pair cable to an standard port (Port 1 ~ 16MDI-X ) on the hub and the ...
EtherHub-16 Quick Start Guide 3 Providing Power to the Hub 1. Power on the hub by plugging the power cord into the power socket at the rear of the hub, and the other end into a power outlet. 2. Check the LED marked Power on the front panel to see if it is on. The unit automatically selects a setting...
EtherHub-16 Quick Start Guide 4 Hardware Description RJ-45 Ports This hub has 16 RJ-45 ports that can be used to connect end-node devices (e.g., workstations, fileservers, or printers). Be sure you have an Ethernet network interface card installed in the deviceto be connected to the hub. Then connec...
