Abocom UFE1500 - Manual - manualsarea.com

Page 3 - INTRODUCTIONS; Specifications; Linux; Physical; Operating Voltage: 5V DC

- 1 - INTRODUCTIONS The USB 10/100M Fast Ethernet Adapterprovides outside-the-box plug-and-play localarea network connections for USB-enabled PCs,notebooks and laptops. This adapter uses a Btype USB port to connect with the USB host, andan RJ-45 port to connect with a 10/100 FastEthernet LAN link. I...

Page 4 - Parts Names and Functions; connects the USB host; USB Fast Ethernet Adapter; LED indicator: glows green when; Network Port; : connects the Fast Ethernet

- 2 - Operation: 111mA (max) Sleep Mode: 3.9 mA (max) Parts Names and Functions c USB Type A plug: connects the USB host port to the USB 10/100M Fast EthernetAdapter. d USB Fast Ethernet Adapter e 10/ACT LED indicator: glows green when 10M Network is linked; blinks green whenthe Fast Ethernet Ad...

Page 5 - INSTALLATION; Precaution; Getting Hooked Up

- 3 - INSTALLATION Precaution Before the installation, make sure the USB portexists in your computer and is enabled. To checkthis, go to My Computer Æ Control Panel Æ System . Open the Device Manager tab. If the Universal Serial Bus controller device is found, it means your USB port is installed and...

Page 6 - Connect the other end to a Hub.

- 4 - 2. Connect the UTP cable to the Fast EthernetAdapter. 3. Connect the other end to a Hub.

Page 7 - SOFTWARE INSTALLATION; Installation for Windows 98

- 5 - SOFTWARE INSTALLATION Installation for Windows 98 1. Once the device is properly connected toyour computer, Windows 98 willautomatically detect the new hardwaredevice. Perform the following proceduresfor installing the device driver. 2. Insert the device driver disk into yourfloppy drive. When...

Page 9 - Setup Diagnostics

- 7 - 5. Go to Start Æ Settings Æ Control Panel . Double-click Network . 6. When the Network dialog box appears,select USB 10/100M Fast Ethernet and click Add . Set the appropriate protocols and client for you needs. When completed,click OK . 7. Remember to restart your computer toactivate the new d...

Page 10 - Adapter; is found, it means that your device is; Installation for Windows 2000; to

- 8 - Adapter is found, it means that your device is properly installed and enabled. Installation for Windows 2000 1. Once the device is well connected to yourcomputer, Windows 2000 will automaticallydetect the new device. Click Next to proceed.

Page 14 - Next; Next; . Windows will copy all the

- 12 - 3. Click Next to continue. 4. Click Next . Windows will copy all the necessary files to your system.

Page 17 - Insert the device; Driver Disk; into the

- 15 - 2. Insert the device Driver Disk into the floppy disk drive of your system. Select Search removable media (floppy, CD-ROM…) and click Next. 3. Click Next to continue. 4. Windows will start searching for theappropriate driver for the installation.When the screen appears as below, click Continu...

Page 18 - Start

- 16 - 5. Wait for seconds while Windows copiesthe appropriate driver to your system. 6. Click Finish. The software installation for this network device is now completed. 7. Go to Start Æ Settings Æ Control Panel Æ Network and Dial-up Connections . Double-click Local Area Connections .

Page 19 - Install; . Set the appropriate protocols

- 17 - 8. When the Network dialog box appears,select USB 10/100 Network Adapter and click Install . Set the appropriate protocols and client for you needs. When completed,click OK. 9. Remember to restart your computer toactivate the new device. Setup Diagnostics To verify if the device exists in you...

Abocom UFE1500 - Manual

Table of Contents:

Summary

Other Abocom Models