Aastra 480i BROADSOFT - Manual

Model 480i Broadsoft Admin Guide 4 Methods of Installation SIP Settings: If you have a proxy server or have a SIP registrar present at a different location than the PBX server, the following settings may need to be changed: 1. Proxy IP This is the IP address of the proxy server. 2. Proxy Port This i...

5 Model 480i Broadsoft Admin Guide Methods of Installation The Aastra 480i Web Client To access the Aastra 480i Web Client, open your web browser (supports Internet Explorer and Gecko engine based browsers like Firefox, Mozilla or Netscape) and enter the phone’s IP address into the address Þ eld, st...

Model 480i Broadsoft Admin Guide 6 480i IP Phone Configuration 480i IP Phone Configuration The Network and SIP options within the 480i phone can be con Þ gured from the phone or from the Aastra 480i Web Client web interface. Administrator level options are password protected in both the phone and th...

7 Model 480i Broadsoft Admin Guide 480i IP Phone Configuration TFTP Server Settings The 480i phone uses the TFTP to download updates of the phone’s Þ rmware and con Þ guration Þ les. You must set the TFTP server address in the phone.From the 480i Phone: 1. Press the £ button to enter the Options Lis...

Model 480i Broadsoft Admin Guide 8 480i IP Phone Configuration Note: At this point modi Þ cations performed to the User name, Screen name, Authentication name and Password affect line 1 of the 480i only. Modi Þ cations to the other lines should be done through the <mac>.cfg Þ le. The NAT IP Ad...

9 Model 480i Broadsoft Admin Guide Setting Parameters through Configuration Files Setting Parameters through Configuration Files The following are the parameters that can be used to con Þ gure the 480i phone through the con Þ guration Þ les. Network Settings: The following section contains the param...

Model 480i Broadsoft Admin Guide 10 Setting Parameters through Configuration Files Parameter – default gateway Con Þ gurable through the 480i's Options List, the Aastra 480i web client or through the con Þ guration Þ les Description The IP address of the network's gateway or the router IP address Fo...

11 Model 480i Broadsoft Admin Guide Setting Parameters through Configuration Files Parameter – tftp server Con Þ gurable through the 480i's Options List, the Aastra 480i web client or through the con Þ guration Þ les Description The TFTP server ’s IP address. If DHCP is enabled and the DHCP server p...

Model 480i Broadsoft Admin Guide 12 Setting Parameters through Configuration Files Time Server Settings: The following section contains the parameters to con Þ gure settings speci Þ c to the timeserver. Parameter – time server disabled Con Þ gurable through the 480i's Options List or the con Þ gurat...

13 Model 480i Broadsoft Admin Guide Setting Parameters through Configuration Files Parameter – time server3 Con Þ gurable through the con Þ guration Þ les only Description The tertiary time server's IP address. If the time server is enabled, and the primary and secondary time servers are not con Þ g...

Model 480i Broadsoft Admin Guide 14 Setting Parameters through Configuration Files SIP Settings: The following parameters are the settings speci Þ c to SIP authentication. Parameter – sip proxy ip Con Þ gurable through the 480i's Options List, the Aastra 480i web client or through the con Þ guration...

15 Model 480i Broadsoft Admin Guide Setting Parameters through Configuration Files Parameter – sip registrar port Con Þ gurable through the 480i's Options List, the Aastra 480i web client or through the con Þ guration Þ les Description The registrar's port number. This setting must be set to zero &#...

Model 480i Broadsoft Admin Guide 16 Setting Parameters through Configuration Files Line Settings Parameter – sip session timer Con Þ gurable through the 480i's Options List, the Aastra 480i web client or through the con Þ guration Þ les Description This session timer parameter is the time in seconds...

Model 480i Broadsoft Admin Guide 18 Setting Parameters through Configuration Files Integration with BroadSoft’s BroadWorks Call Manager Parameter – sip lineN mode Con Þ gurable through the con Þ guration Þ les only. Description This sets the mode of the line as either private or shared. If the line ...

19 Model 480i Broadsoft Admin Guide Setting Parameters through Configuration Files Softkey Settings This section contains the softkey parameters that can be con Þ gured on the 480i phone. There are eighteen softkeys that can be con Þ gured. These parameters can be con Þ gured either from the Aastra....

Model 480i Broadsoft Admin Guide 20 Setting Parameters through Configuration Files Range Sequence of ascii characters. A width less than 11 characters for line softkey type and a width less than 9 for the speeddial softkey type is suggested. N in the softkeyN label ranges from 1 to 18 Example softke...

21 Model 480i Broadsoft Admin Guide Setting Parameters through Configuration Files Firmware Upgrade The 480i phone uses a TFTP server to download con Þ guration Þ les and Þ rmware. The TFTP server should be ready and be able to accept connections anonymously (without a requirement for a user name an...

23 Model 480i Broadsoft Admin Guide Troubleshooting Troubleshooting This section describes solutions to some most commonly occurring problems. Why does my phone display "Application missing"? If you have experienced networking issues while the phone was downloading the application from the T...

Model 480i Broadsoft Admin Guide 24 Troubleshooting How to set the 480i phone to factory default? From the 480i phone: 1. Press the £ button to enter the Options List. 2. Select option 10. Phone Status to enter the Phone Status options list. 3. Select option 4. Factory Default . 4. Enter the adminis...

25 Model 480i Broadsoft Admin Guide Appendix A: Sample Configuration Files Appendix A: Sample Configuration Files This section consists of the sample con Þ guration Þ les necessary to con Þ gure the 480i phones. The general format is similar to con Þ guration Þ les used by several Unix-based program...

Model 480i Broadsoft Admin Guide 26 Appendix A: Sample Configuration Files #----------------------------------------------------------------------# DHCP Setting# ============ dhcp: 1 # DHCP enabled. # DHCP: # 0 = false, means DHCP is disabled.# 1 = true, means DHCP is enabled. # Notes: If DHCP is di...

31 Model 480i Broadsoft Admin Guide Appendix A: Sample Configuration Files softkey13 type: speeddialsoftkey13 label: "Cancel CW"softkey13 value: *70 # Example Softkey Line/Call Appearances# ===================================== # For the examples of softkey line/call appearances, please # re...

Model 480i Broadsoft Admin Guide 34 Appendix A: Sample Configuration Files # Explanation of Settings with Line 1 as Example# ============================================== #sip line1 auth name: # SIP Registrar request authorization name. #sip line1 password: # SIP Registrar request passcode. #sip li...

39 Model 480i Broadsoft Admin Guide Limited Warranty Limited Warranty Aastra Telecom warrants this product against defects and malfunctions during a one (1) year period from the date of original purchase. If there is a defect or malfunction, Aastra Telecom shall, at its option, and as the exclusive ...