3M FSTMO75 - Manual
3M FSTMO75 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – EXPLANATION OF SIGNAL WORD CONSEQUENCES; WA R N I N G; IMPORTANT NOTES; Water Filtration Products; SAFETY INFORMATION
- Page 3 – tents; Qty; Tank & Bracket Assembly; Figure 1; Product Dimensions
- Page 4 – Mounting; in direct sunlight or outdoors.; Do not install; CAUTION
- Page 5 – Plumbing Connections
- Page 6 – Using Push-In Fittings
- Page 7 – • Tank Pressure should be checked yearly.; Tank Pressure Check; Part Number; Replacement Parts
- Page 8 – Troubleshooting Guide
- Page 12 – CUNO Incorporated
Installer: Please leave this manual with owner/operator.
End User: Please retain for operation and future maintenance instructions.
FlashGARD HP
™
Reverse Osmosis Filtration System
Model Number FSTMO75
Part Number 56123-06
3M
™
Water Filtration Products
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
To reduce the risk associated with property damage due to water leakage: • Read and follow Use Instructions before installation and use of this system. • Before starting installation, shut off main water supply and drain pipes. • Installation and Use MUST comply with all state and local plumbing cod...
Table of Contents Safety Instructions ................................................................................................................................................................ Page 2 Caution and Warning Statements...................................................................
Mounting 1) Remove the mounting bracket template (see page10) from this manual. Tape it to the wall where the mounting bracket is to be installed. 2) Install mounting screws (not included) into each of the keyhole locations on the template. Be sure to leave a 1/8” to 1/4” space between the bottom of...