3Com WL-548A - Manual
3Com WL-548A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Com AirProtect Sensor 5750 Features; Feature
- Page 4 – Informacje na temat bezpieczeñstwa
- Page 5 – Installation Item
- Page 6 – Mounting the Sensor; Wall, Ceiling, or Electrical Box Mounting; Wall-mounting the cradle
- Page 7 – Connecting Power and the Network; Power Over Ethernet from a PoE Injector; Sensor
- Page 8 – Checking the LED Indicators; Troubleshooting; LED; Power
- Page 9 – US — R
- Page 10 – US M; — RF C
- Page 11 – EU C
Quick Installation Guide
3Com
®
AirProtect Sensor 5750
3CRWX5750GS / Model WL-548A
The 3Com® AirProtect Sensor 5750 provides dual-radio IEEE 802.11a and 802.11b/g wireless
intrusion prevention (WIP) capability for your network. The sensor is designed for use with a 3Com
AirProtect WIPS Engine 6100, and requires hardware installation only. You must have a 3Com
AirProtect Engine 6100 installed on your network to operate the sensor.
Power is supplied using Power Over Ethernet (PoE). The following 3Com PoE devices, or any third-
party 802.3af compliant PoE solution, may be used to supply power to the sensor:
About This Guide
This Quick Installation Guide describes the basic setup of the sensor. It covers the following topics:
•
3Com AirProtect Sensor 5750 Features
•
•
•
Step 2: Preparing for Installation
•
Step 3: Attaching the Antennas
•
•
Step 5: Connecting Power and the Network
•
Step 6: Checking the LED Indicators
•
•
•
3Com WX1200
•
3Com WXR100
•
3Com PoE Injector
•
Any 3Com 802.3af compliant PoE Switch
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3Com AirProtect Sensor 5750 Features Feature Description 1 Antenna Connectors Two RSMA type antenna connectors allow you to connect antennas that operate in 2.4 GHz and 5.0 GHz bands. 2 LEDs The LEDs indicate power and activity. See “Checking the LED Indicators” on page 8 for details. 3 Ethernet P...
4 Informacje na temat bezpieczeñstwa Urz ą dzenie musi by ć zamontowane zgodnie z lokalnymi i krajowymi normami, ustawami i przepisami. W celu zagwarantowania bezpiecze ń stwa osób i urz ą dze ń , instalacj ę Punktu dost ę pow ę go mo ż e przeprowadza ć wy łą cznie wyszkolony fachowiec ds. sieci. Pr...
5 1. Unpacking the Sensor Make sure that you have the following items, which are included in the package: 2. Preparing for Installation It is advisable to connect the power (if using an external PoE supply) and check the Ethernet cables and LEDs before installing the sensor in a hard-to-reach locati...
