ZOOM H08-15356 - Manual
ZOOM H08-15356 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
10/16/2008 vF1-05-72
Firmware Patch Version F1-05-72 for USB Mini Modem
This Firmware Patch is only for the following modem models:
•
Zoom V.92 USB Mini External, Model 3095
•
Hayes Accura V.92 USB Mini External, Model H08-15356
How to Apply the Firmware Patch
This Firmware Patch is a 2-file process. These files must be loaded using a terminal emulation program
that can communicate with modems/serial ports and transfer ASCII or text files. The port settings in the
program must be configured to a baud rate (port speed) between 9600 and 115200 bps and hardware
flow control (RTS/CTS) enabled.
Below are steps for loading the firmware files using HyperTerminal, which is included with Windows 95
through XP. These instructions assume you have installed the modem using the Zoom or Hayes drivers,
depending on which modem model you have. Refer to the modem’s Quick Start or User Guide if
necessary. The driver installation automatically configures the port settings.
Windows Vista users will need to use a third-party terminal emulation program, such as the freeware
TeraTerm Pro Web by Ayera Technologies (
http://www.ayera.com
).
Loading the Firmware Files Using HyperTerminal
1
1
1
1
From the
Start
menu, select
All Programs
(or
Programs
)
→
Accessories
→
Communications
→
HyperTerminal
and open the
HyperTerminal
(or
Hypertrm.exe
) application.
Note:
If HyperTerminal is not installed on your computer, from the
Start
menu, go to
Control Panel
(or
Settings
→
Control Panel
), open
Add/Remove Programs
, and click the
Windows Setup
tab.
Select
Communications
and click the
Details
button. Select
HyperTerminal
and click
OK
, then
Apply
. You may be asked to insert your Windows installation disk.
2
2
2
2
When the
Connection Description
window appears, enter any description (e.g., “test”) in the
Name
field, accept the default icon, and click
Next
.
3
3
3
3
On the
Connect To
window, enter any number (e.g., “123”) in the
Area Code
and
Phone Number
fields, select
USB Modem
from the
Connect using
drop-down menu, and click
Next
.
4
4
4
4
On the
Connect
window, click
Cancel
.
5
5
5
5
On the white screen with a blinking cursor, type
AT&F
(even if the command characters are not
echoed on screen)
and press
Enter
. The modem should respond
OK
.
Note: The command characters are not case sensitive.
6
6
6
6
Type
AT**
and wait for the
Download initiated ..
response.
7
7
7
7
From the
Transfer
menu (top of the screen), select
Send Text File
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
