Page 3 - End User License Agreement (Zhone and Affiliates)
4929 DSLAM Installation and User’s Guide 3 End User License Agreement (Zhone and Affiliates) License. Zhone Technologies, Inc. and/or an affiliate ("Zhone") hereby grants you ("User")—either an individual or a single business entity—the non-exclusive right to install, access, run, or...
Page 4 - Important Safety Instructions
4 4929 DSLAM Installation and User’s Guide U.S. Government Users. The Software is a "commercial item" as defined at 48 C.F.R. 2.101, consisting of "commercial computer software" and "commercial computer software documentation" as such terms are used in 48 C.F.R. 12.212. Under...
Page 5 - EMI Notices
4929 DSLAM Installation and User’s Guide 5 transponders have been installed. Do not install laser products whose class rating is greater than 1. Refer to all important safety instructions that accompanied the transceiver prior to installation. Only laser Class 1 devices certified for use in the coun...
Page 6 - Notices to Users of the Canadian Telephone
6 4929 DSLAM Installation and User’s Guide CANADA – EMI NOTICE: This Class A digital apparatus meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la classe A respecte toutes les exigences du réglement sur le matérial brouilleur du Canada. Not...
Page 7 - ONTENTS
4929-A2-ZN20-30 November 2005 7 C ONTENTS Document Purpose and Intended Audience ............................................................ 11 Document Summary ................................................................................................... 11 Related Product Documents ............
Page 9 - DSL Ports and POTS Splitter Connectors; Appendix B Equipment List
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 9 DSL Ports and POTS Splitter Connectors ............................................................... 83 SFP Connector ............................................................................................................. 85 10/100/1...
Page 11 - BOUT; Document Purpose and Intended Audience
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 11 A BOUT T HIS G UIDE Document Purpose and Intended Audience This document is written for technicians who install the 4929 DSLAM. Document Summary A master glossary of terms and acronyms used in these documents is available on the World Wide ...
Page 12 - Related Product Documents
12 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Related Product Documents Documentation for this product is available on the World Wide Web at www.zhone.com . Document Title MIM-10/100 Installation Instructions Describes how to install the MIM-10/100 Micro Interface Module. MIM-2E1 Insta...
Page 13 - Contacting Global Service and Support; Technical Support
Contacting Global Service and Support 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 13 Contacting Global Service and Support Contact Global Service and Support (GSS) if you have any questions about this or other Zhone products. Before contacting GSS, make sure you have the following infor...
Page 15 - NTRODUCTION; Overview
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 15 I NTRODUCTION Overview The 4900 Series DSLAMs are ADSL ITU G.992.5-compliant IP DSLAMs. They are available with or without internal POTS splitters. The 4900 Series DSLAMs are Ethernet based, environmentally hardened, and small enough to fit...
Page 17 - NSTALLATION; Preparation
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 17 I NSTALLATION Preparation Consider the following before installing the DSLAM: z Installation Site – Your installation site should be well ventilated, clean, and free of environmental extremes. z Installation Options – The DSLAM may be: — Mo...
Page 18 - Cables Required
Installation 18 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Cables Required No cables are provided with the DSLAM. See Table 1, Cable Descriptions , to determine what cables you need to obtain before installation. See Appendix A, Connectors and Pin Assignments and Appendix B, Equipment ...
Page 19 - Unpacking the Hardware; HANDLING PRECAUTIONS FOR; Package Contents; Mounting Configurations
Unpacking the Hardware 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 19 Unpacking the Hardware HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES This product is designed to protect sensitive components from damage due to electrostatic discharge (ESD) during normal operation. When performi...
Page 20 - Installing the Brackets for Rack Mounting
Installation 20 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Installing the Brackets for Rack Mounting The 4900 DSLAM can be installed in a rack using mounting brackets. Two brackets suitable for a 19-inch (483 mm ) rack and two brackets suitable for a 23-inch (584 mm ) Bay Networks or N...
Page 21 - Installing the DSLAM Into a Rack
Installing the DSLAM Into a Rack 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 21 Installing the DSLAM Into a Rack Use: z #10-32 mounting screws for rails with threaded screw holes z #12-24 mounting screws and self-retaining nuts for rails with unthreaded screw holes To install the DSLAM ...
Page 22 - Installing the DSLAM on a Wall
Installation 22 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 3 Insert and tighten the screws in the top screw positions, then tighten the bottom screws. Installing the DSLAM on a Wall Wall mounting requires two wood screws suitable for the weight of the fully cabled unit. These are not i...
Page 24 - Installing the DSLAM on a Shelf or Desktop
Installation 24 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 8 Hang the unit from the wood screws to verify that the screws are properly placed. The screws should freely slide into the top of the key slots in the brackets.Do not fasten the unit to the wall until after it is completely ca...
Page 25 - ABLING; Cabling Overview
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 25 C ABLING Cabling Overview The 4900 Series DSLAM has a large variety of possible cabling configurations. This chapter describes all possible connections, not all of which are required: z Installing the Micro Interface Module on page 26 z Con...
Page 26 - Installing the Micro Interface Module
Cabling 26 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Installing the Micro Interface Module A Micro Interface Module (MIM) is not required for operation. It provides additional Ethernet, T1, or E1 uplink ports for the DSLAM, depending upon the MIM model installed. To install a MIM: 1 U...
Page 27 - Connecting the ADSL2+ and POTS Connectors
Connecting the ADSL2+ and POTS Connectors 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 27 Connecting the ADSL2+ and POTS Connectors DSL connector supports the tip and ring connections of up to 24 DSL ports over a 50-position cable. A POTS (plain old telephone service) splitter connector ...
Page 28 - Connector
Cabling 28 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 6 Install the supplied large ferrite chokes on the DSL and POTS cables as close as possible to the connectors. If necessary, use cables ties to hold the chokes in place. 7 Secure the cables as required for strain relief. Connecting ...
Page 29 - Connecting DSLAMs to Each Other
Connecting DSLAMs to Each Other 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 29 — For an SFP copper connection , plug your transceiver into the SFP socket. Plug the 8-position modular plug of your uplink cable into the SFP transceiver’s modular jack. — For an SFP fiber connection , plug ...
Page 30 - Connecting the COM Port; Connecting a Terminal or PC to the COM Port
Cabling 30 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Connecting the COM Port You can use the COM port to directly connect a PC, terminal, or modem, permitting use of the Command Line Interface (CLI). Connecting a Terminal or PC to the COM Port To connect a terminal or PC to the COM po...
Page 31 - Connecting a Modem to the COM Port; Connecting to Power
Connecting to Power 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 31 Connecting a Modem to the COM Port To connect a modem to the COM port: 1 Determine and procure the proper DCE cable type for your modem. The COM port requires an RJ45-type plug connector. The other connector depends on t...
Page 33 - LED Locations; LED Meanings
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 33 LED S LED Locations The locations of the System and DSL Port LEDs on the front panel of the DSLAM are shown in Figure 1, Front Panel LEDs . Figure 1: Front Panel LEDs LED Meanings The meaning of the front panel LEDs is shown in Table 2, Fro...
Page 35 - ONFIGURATION; NMS
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 35 C ONFIGURATION U SING THE NMS Overview The 4900 Series DSLAMs have an integral web interface that you can access with a web browser. The DSLAM’s integral Network Management System (NMS) lets you configure and monitor the DSLAM using a stand...
Page 36 - Configuring Your Windows PC to Communicate with
Configuration Using the NMS 36 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Configuring Your Windows PC to Communicate with NMS To communicate with NMS, your PC’s Ethernet interface must be on the same subnet as the network extender. For example, to configure the IP address under Windows...
Page 38 - Management Configuration
Configuration Using the NMS 38 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Management Configuration Use the Management Configuration screen to set the unit’s IP address and other management parameters. To configure management parameters: 1 From the home screen, click on the Management C...
Page 39 - Advanced Configuration
Advanced Configuration 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 39 Advanced Configuration Use the Advanced Configuration screen to set the unit’s system name and other parameters. To configure advanced system parameters: 1 From the home screen, click on the Advanced Config button. Th...
Page 40 - HTTP Password
Configuration Using the NMS 40 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 HTTP Password Use the HTTP Password screen to set the password for the General and Superuser logins. To configure HTTP passwords: 1 From the home screen, click on the HTTP Password button. The HTTP Password Admin...
Page 41 - SNMP Configuration
SNMP Configuration 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 41 SNMP Configuration Use the SNMP Configuration screen to enable traps and establish trap managers. To configure SNMP parameters: 1 From the home screen, click on the SNMP Config button. The SNMP Configuration screen appear...
Page 42 - SNMP Community Administration
Configuration Using the NMS 42 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 SNMP Community Administration Use the SNMP Community Administration screen to set the read and read/write community names. To configure community names: 1 From the home screen, click on the SNMP Community button....
Page 43 - Global Set; Global Circuit Configuration
Global Set 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 43 Global Set Use the Global Set screen to set parameters for all ports or for a group of ports at once. Global Circuit Configuration To configure global parameters: 1 From the home screen, click on the Global Set button. The Global...
Page 45 - Global DSCP Rules
Global Set 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 45 4 Click on Submit. Global DSCP Rules To configure DSCP rules: 1 Click on the Global DSCP Rules tab. The Global DSCP Rules screen appears. 2 In the Add Ports drop-down list, select All or a group of ports. To select multiple ports...
Page 47 - Global IP Rules
Global Set 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 47 4 Click on Submit. Global IP Rules To configure IP rules: 1 Click on the Global IP Rules tab. The Global IP Rules screen appears. Fixed/Max Specify the handling of VLAN priority (used only if the received packet is already tagged...
Page 49 - Global MAC Rules
Global Set 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 49 4 Click on Submit. Global MAC Rules To configure MAC rules: 1 Click on the Global MAC Rules tab. The Global MAC Rules screen appears. Fixed/Max Specify the handling of VLAN priority (used only if the received packet is already ta...
Page 51 - Global VLAN Rules
Global Set 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 51 4 Click on Submit. Global VLAN Rules To configure VLAN rules: 1 Click on the Global VLAN Rules tab. The Global VLAN Rules screen appears. Fixed/Max Specify the handling of VLAN priority (used only if the received packet is alread...
Page 54 - Global Advanced Configuration
Configuration Using the NMS 54 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Global Advanced Configuration SNR settings may greatly affect ADSL performance. Do not change SNR settings unless so advised by your service provider. To configure SNR settings: 1 Click on the Global Advanced Con...
Page 55 - Circuit Summary
Circuit Summary 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 55 4 Click on Submit. Circuit Summary Use the Circuit Summary screen to display information about port configurations. To display the circuit summary: 1 From the home screen, click on the Circuit Summary button. The Circuit Sum...
Page 56 - Circuit Configuration
Configuration Using the NMS 56 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Circuit Configuration Use the Circuit Configuration screen to set the parameters for a single port. To configure circuit parameters: 1 From the home screen, click on one of the 24 DSL port LEDs. Alternatively, cl...
Page 58 - DSCP Rules
Configuration Using the NMS 58 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 DSCP Rules To configure DSCP rules: 1 Click on the DSCP Rules tab. The DSCP Rules screen appears. 2 Select or enter the following parameters: Parameter Description Port Select a port from the drop-down list. Rese...
Page 60 - IP Rules
Configuration Using the NMS 60 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 IP Rules To configure IP rules: 1 Click on the IP Rules tab. The IP Rules screen appears. 2 Select or enter the following parameters: Parameter Description Port Select a port from the drop-down list. Activate Spe...
Page 62 - MAC Rules
Configuration Using the NMS 62 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 MAC Rules To configure MAC rules: 1 Click on the MAC Rules tab. The MAC Rules screen appears. 2 Select or enter the following parameters: Parameter Description Port Select a port from the drop-down list. Reset th...
Page 64 - VLAN Rules
Configuration Using the NMS 64 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 VLAN Rules To configure VLAN rules: 1 Click on the VLAN Rules tab. The VLAN Rules screen appears. 2 Select or enter the following parameters: Parameter Description Port Select a port from the drop-down list. Rese...
Page 66 - Backbone VLAN ID
Configuration Using the NMS 66 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Backbone VLAN ID To configure the backbone VLAN ID, flood type, and Ethertype: 1 Click on the Bkbone VLAN Id, Flood, Ethertype tab. The Bkbone VLAN Id, Flood, Ethertype screen appears. 2 Select or enter the follo...
Page 68 - Port Statistics
Configuration Using the NMS 68 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Port Statistics To view port statistics: 1 Click on the Port Statistics tab. The Port Statistics screen appears. 2 Click on Reset Statistics to set all statistics to zero.
Page 69 - Copy Port
Circuit Configuration 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 69 Copy Port To copy a port configuration to one or more other ports: 1 Click on Port Copy. The Port Copy screen appears. 2 Select a source port, then one or more destination ports. 3 Click on Submit. The configuration of...
Page 70 - SNR Advanced Configuration
Configuration Using the NMS 70 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 SNR Advanced Configuration SNR settings may greatly affect ADSL performance. Do not change SNR settings unless so advised by your service provider. To configure SNR settings: 1 Click on the Advanced Config tab. T...
Page 71 - MAC and IGMP Summary
MAC and IGMP Summary 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 71 3 Click on Submit. MAC and IGMP Summary On the home screen of the web interface is a schematic representation of the front panel of the DSLAM. It includes a button not on the actual front panel, labeled MAC-IGMP. This o...
Page 75 - OMMAND; Connecting a PC Directly
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 75 C OMMAND L INE I NTERFACE Overview The 4900 Series DSLAMs have an integral command line interface (CLI) that can be accessed by direct connection to the COM port or by Telnet to the DSLAM’s management address. CLI System Requirements z Stra...
Page 76 - Launching the Terminal Emulation Program
Command Line Interface 76 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Launching the Terminal Emulation Program Launch the terminal emulation program on your PC and configure the program settings. Actual configurations will depend upon the program being used, though settings should be mo...
Page 80 - Using the CLI to Establish Inband Management
Command Line Interface 80 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 Using the CLI to Establish Inband Management CLI Set commands are used to establish inband management. For example: set slot 1 ip_address 137.182.10.251set slot 1 subnet_mask 255.255.255.0set slot 1 default_gateway 13...
Page 81 - SNMP I; NTERFACE; Downloading MIBs
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 81 SNMP I NTERFACE Overview The 4900 Series DSLAM can be managed using the Simple Network Management Protocol (SNMP). This implementation uses a portion of SNMP v1.0: the MIB-II System Group and Interfaces Group of OIDs. SNMP uses MIBs (Manage...
Page 82 - SNMP Community Strings
SNMP Interface 82 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30 SNMP Community Strings The following are the default community strings for MIB access. SNMP Community String ACCESS COMMUNITY STRING* read only Password read/write Password *Community strings are case sensitive.
Page 83 - ONNECTORS
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 83 C ONNECTORS AND P IN A SSIGNMENTS Overview The following sections provide pin assignments for: z DSL Ports and POTS Splitter Connectors on page 83 z SFP Connector on page 85 z 10/100/1000BaseT Connector on page 86 z DB9 to RJ45 Adapter Pino...
Page 85 - SFP Connector
SFP Connector 4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 85 SFP Connector The SFP interface is a standard SFP socket. Table 6: Port 3 GigE Connector Signal Pin VeeT 1 TXFault 2 TXDisable 3 MOD-DEF(2) – I2C_DATA 4 MOD-DEF(1) – I2C_CLK 5 MOD-DEF(0) – SFP_PRESENT_L 6 Rate Select 7 LOS 8 V...
Page 89 - QUIPMENT
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 89 E QUIPMENT L IST 4900 Series DSLAM models are listed in Table 9, 4900 Series Models and Features . All 4900 Series DSLAMs come with 19- and 23-inch mounting brackets and hardware, and the Installation Guide. Table 9: 4900 Series Models and ...
Page 91 - ECHNICAL
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 91 T ECHNICAL S PECIFICATIONS Technical specifications are subject to change without notice. Table 11: 4900 Series DSLAM Technical Specifications (Sheet 1 of 2) Specifications Criteria Cooling and Air Handling Each 4900 Series DSLAM is indepen...
Page 93 - NDEX; Numerics
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 93 I NDEX Numerics 10/100/1000BaseT pinouts 86 A About This Guide 11Activity LEDs 33ADSL mode 45, 57Advanced Configuration 39Audience for this document 11 B Backbone VLAN ID 66Brackets 19 C Cables 83 DSL ports 83MGMT port 86MIM 18Required 18 C...
