Zenoah YM415FW - Manual
Zenoah YM415FW – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – 5 meters away from the brushcutter.
- Page 3 – Set up; ENGINE
- Page 4 – Use; up. Pull the throttle lever to unlock it.; Fuel; WARNING; Condition; NOTE
- Page 5 – Cutting work; that the cutting head may become parallel to the ground. (F13); SWIVEL LOCK; lock to prevent the engine from roll down.; WHEN USING A METAL BLADE; the blade turns smoothly without abnormal noise.; CUTTING METHOD; time at the cold temperature.; WHEN USING A NYLON LINE HEAD; Always do cutting with the engine running at full throttle.
- Page 6 – Maintenance; A clogged fuel filter may cause poor acceleration of the engine.; IMPORTANT
- Page 7 – Overall dimension; • Specifications are subject to change without notice; Specifications; (g) T r a n s p o r t a t i o n c h a r g e f o r; Limited warranty
YM 415 FW
848JJ693A0 (602)
OPERATOR’S MANUAL
BRUSHCUTTER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 For safe operation Contents For safe operation ...................................2Set up ......................................................3Fuel .........................................................4Use .........................................................4Maintenance....................
Set up ■ ENGINE • Using attached 4 socket screws, secure the connection firmly with equal force. (F1) ■ INSTALLING HANDLE 1. Loosen the 4 bolts on the handle bracket. (F2)2. Insert the right handle (throttle lever is attached) and the left handle assembly into the bracket and retighten the bolts sec...
Use ■ STARTING THE ENGINE Take care that the cutting head will start rotating upon the engine starts. 1. Open the fuel tank cock. (F8-1-b) 2. Move the choke lever to the closed position. (F8-2-a) 3. Set the engine switch (F10-a) to the " I " position. Set the throttle lever to the start posi...
