Zenoah YM 415 DW - Manual
Zenoah YM 415 DW – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – away from the machine.
- Page 3 – Set up; ENGINE
- Page 4 – Use; up. Pull the throttle lever to unlock it.; Fuel; WARNING; Condition; NOTE
- Page 5 – Cutting work; that the cutting head may become parallel to the ground. (F12); WHEN USING A METAL BLADE; the blade turns smoothly without abnormal noise.; CUTTING METHOD; time at the cold temperature.; WHEN USING A NYLON LINE HEAD; Always do cutting with the engine running at full throttle.
- Page 6 – Maintenance; A clogged fuel filter may cause poor acceleration of the engine.; IMPORTANT
YM 415 DW
848JJ993A0 (705)
OPERATOR’S MANUAL
BRUSHCUTTER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 For safe operation Contents For safe operation ...................................2Set up ......................................................3Fuel .........................................................4Use .........................................................4Maintenance....................
Set up ■ ENGINE • Using attached 4 socket screws, secure the connection firmly with equal force. (F1) ■ INSTALLING HANDLE 1. Loosen the 4 bolts on the handle bracket. (F2)2. Insert the right handle (throttle lever is attached) and the left handle assembly into the bracket and retighten the bolts sec...
Use ■ STARTING THE ENGINE Take care that the cutting head will start rotating upon the engine starts. 1. Push the primer pump(1) several times until overflown fuel flows out in the clear tube. 2. Move the choke lever(2) to the closed position. 3. Set the engine switch (F9-a) to the " I " pos...
