Zenoah BCZ2602DL - Manual - manualsarea.com

Page 2 - EXPLANATION OF SYMBOLS AND SAFETY WARNINGS; RISK OF DAMAGING HEARING; MODEL; APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION

GB-2 BCZ2602DL EXPLANATION OF SYMBOLS AND SAFETY WARNINGS ZENOAH CO., LTD. Masahiko GOUDA 1st April 2007 WARNING!!! RISK OF DAMAGING HEARING Wear head, eye and ear protection. guaranteed 108 dB(A) measured 106.47 dB(A) MODEL 25.4 cm 3 SOUND LEVEL VIBRATION LEVEL ISO 10884 LwA ISO 7916 idling 5.9 m/s...

Page 3 - SAFETY FIRST; WARNINGS IN THE MANUAL; Contents

GB-3 G B BCZ2602DL SAFETY FIRST Instructions contained in warnings within this manual markedwith a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, andfor this reason you are requested to read all such instructionscarefully and follow t...

Page 5 - For safe operation; WORKING CONDITION; protector; WORKING CIRCUMSTANCE; If you don’t observe the working; “USING THE PRODUCT”

GB-5 G B BCZ2602DL 5. For safe operation 1. Read this manual carefully until you completely understand andfollow all safety and operatinginstructions. 2. Keep this manual handy so that you may refer to it later when-ever any questions arise. Alsonote, if you have any questionsw h i c h c a n n o t b...

Page 6 - WARNING

GB-6 BCZ2602DL 5. For safe operation par t nor the throttle come intocontact with any obstacle whenthe engine starts. WARNING Never place the throttle into thehigh-speed position when startingthe engine. 3. After starting the engine, check to make sure that the cutting at-tachment stops rotating whe...

Page 10 - Stop; Stop

GB-10 BCZ2602DL STARTING ENGINE WARNING The cutting head will start rotating upon the enginestarts. 1. Feed fuel into the fuel tank and tighten the cap se- curely. 2. Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects,as it will start rotating ...

Page 14 - REPLACEMENT PLUG IS A NGK CMR7A.

GB-14 BCZ2602DL AIR FILTER • The air filter, if clogged, will reduce the engine perfor- mance. Check and clean the filter element in warm,soapy water as required. Dry completely before in-stalling. If the element is broken or shrunk, replacewith a new one. FUEL FILTER • When the engine runs short of...

Page 15 - • Check the intake air cooling vent and the area

GB-15 G B BCZ2602DL IMPORTANT • Note that using any spark plug other than those desig-nated may result in the engine failing to operate properlyor in the engine becoming overheated and damaged. • To install the spark plug, first turn the plug until it isfinger tight, then tighten it a quarter turn m...

Page 16 - THE WARRANTY DOES NOT APPLY TO; THOSE UNITS; THIS WARRANTY DOES NOT COVER; INCLUDING THOSE OF MER-; ARE LIMITED

GB-16 BCZ2602DL 12. Troubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged → clean carburetor adjustment screw → out of normal range → adjust to normal range sparking (no spark) → spa...

Zenoah BCZ2602DL - Manual

Table of Contents:

Summary

Other Zenoah Models