Zenoah BC4310FW - Manual
Zenoah BC4310FW – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – 5 meters away from the brushcutter.
- Page 3 – Set up; ENGINE; • Wrap the protector around the outer pipe as shown in the figure (F3).; SAFETY GUARD
- Page 4 – Use; up. Pull the throttle lever to unlock it.; Fuel; WARNING; Condition; NOTE
- Page 5 – Cutting work; SWIVEL LOCK
- Page 6 – Maintenance; A clogged fuel filter may cause poor acceleration of the engine.; IMPORTANT
- Page 7 – Specifications
BC4310FW
BRUSHCUTTERS
848JJ393A2 (708)
OWNER’S MANUAL
Caution
• Before using our brushcutter, please
read this manual carefully to understand
the proper use of your unit.
• Keep this manual handy.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 For safe operation Contents For safe operation ...................................2Set up ......................................................3Fuel .........................................................4Use .........................................................4Maintenance....................
Set up ■ ENGINE • Using attached 4 bolts, secure the connection firmly with equal force. (F1) (1) Bolt ■ INSTALLING HANDLE 1. Loosen the 4 bolts on the handle bracket. (F2)2. Insert the right handle (throttle lever is attached) and the left handle assembly into the bracket and retighten the bolts se...
Use ■ STARTING THE ENGINE Take care that the cutting head will start rotating upon the engine starts. 1. Open the fuel tank cock. (F7-1-b) 2. Move the choke lever to the closed position. (F7-2-a) 3. Set the engine switch (F8-1) to the " RUN " position. 4. Place the unit on a flat, firm place...
