Page 2 - CAUTION; NOTE TO CABLE TV INSTALLER:; For Customer Support/Service please call:; RECORD THE MODEL NUMBER
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIEDSERVICE PERSONNEL. WA R N I N G : TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. IT IS...
Page 3 - P A G E 3; DISCONNECTING DEVICE FROM MAINS:; IMPORTANT SAFEGUARDS FOR YOU AND YOUR NEW PRODUCT
P A G E 3 CAUTION: Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation.Unauthorized modification could void the user’s authority to operate this product. COMPLIANCE: The responsible party for this product’s compliance is:LG Electronics U...
Page 4 - Outdoor Antenna Grounding; IMPORTANT SAFETY INSTRUCTIONS; NEC - National Electrical Code; PORTABLE CART WARNING
P A G E 4 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install ...
Page 5 - Table of Contents; P A G E 5; Step 2. Channel Search and Reception Setup
Table of Contents P A G E 5 Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . .2-3Important Safety Instructions . . . . . . . . . . . . . . . . . . .4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Step 1. HD Integrator Box System Installation andConnections ...
Page 6 - Setup Checklist
P A G E 6 Installation Overview • Unpack the HD Integrator Box System and all accessories. • Determine installation location for the HD Integrator Box System, TV stand ormount. • Determine mounting and installation requirements. If used, AC Powersource outlet, Antenna/Cable service connectors, any e...
Page 7 - Installation/Connections Overview; P A G E 7; POWER LED; The STATUS LED flashes while the program is running.; RESET; Press RESET to start the program that re-initializes the HCS5610.; UPDATE; HCS5610 front panel controls and LED functions
Installation/Connections Overview RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT RS-232C DISPLAY CONTROL AUX CONTROL DIGITAL VIDEO OUT AC IN DIGITAL AUDIO OUT (OPTICAL) AC OUT DIGITAL VIDEO IN MAX 8A 960W AC 120V~ 60Hz 1 2 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT RS-232C DISPLAY CONTROL AUX CONTROL DI...
Page 8 - Ventilation; P A G E 8; Ventilation Clearance; b. If the box is mounted horizontally, the vents should
Ventilation P A G E 8 The HCS5610 Integrator Box as well as Plasma monitors generate heat during operation and needto be provided with adequate ventilation to assure continued reliable operation. See recommenda-tions below. Proper clearance for air to flow around the HCS5610Integrator Box must be pr...
Page 9 - Ventilation / Installation Overview; P A G E 9; Monitor/Integrator Box Wall Mounting System
Ventilation / Installation Overview P A G E 9 Angled brackets are provided so that the Integrator Box can bemounted on a flat vertical surface, like a wall.Install the angled brackets with the screws provided.Mount Integrator Box on the wall using appropriate screws. *Note: The brackets are designed...
Page 10 - AUX Controller: Connection and Placement; AUDIO; IR Receiver & Bracket Installation; IR Receiver & IR Bracket Installation; Connect the AUX Controller to the AUX CONTROL cord on the TV/STB.; AUX Controller; IR Sensor
AUX Controller: Connection and Placement P A G E 1 0 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT RS-232C DISPLAY CONTROL AUX CONTROL DIGITAL VIDEO OUT AC IN DIGITAL AUDIOOUT (OPTICAL) AC OUT DIGITAL VIDEO IN MAX 8A 960W AC 120V~ 60Hz 1 2 (+) ( ) (+) ( ) AUDIO (MONO) R L VIDEO Y PB R P AV INPU T AUDIO...
Page 11 - Antenna Hookup; Connect an off-air antenna to the HD Integrator Box System.; Mini glossary; 5 OHM RF CABLE
Antenna Hookup P A G E 1 1 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT AUX CONTROL DIGITAL VIDEO OUT DIGITAL VIDEO IN 1 2 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT AUX CONTROL DIGITAL VIDEO OUT DIGITAL VIDEO IN 1 2 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT RS-232C DISPLAY CONTROL AUX CONTROL DIGITA...
Page 12 - Cable Service Hookup; Connect cable service to the HD Integrator Box System.
Cable Service Hookup P A G E 1 2 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT AUX CONTROL DIGITAL VIDEO OUT DIGITAL VIDEO IN 1 2 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT AUX CONTROL DIGITAL VIDEO OUT DIGITAL VIDEO IN 1 2 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT RS-232C DISPLAY CONTROL AUX CONTROL ...
Page 13 - RS-232C Control Connections
RS-232C Control Connections P A G E 1 3 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT RS-232C DISPLAY CONTROL AUX CONTROL DIGITAL VIDEO OUT AC IN DIGITAL AUDIO OUT (OPTICAL) AC OUT DIGITAL VIDEO IN MAX 8A 960W AC 120V~ 60Hz 1 2 Connect the Display Control (RS-232C) port from the TV/STB to the display p...
Page 14 - Viewing Equipment Setup
Viewing Equipment Setup P A G E 1 4 Connect the TV/STB to the display device that will be used to view the signal.An unswitched AC power outlet is specifically provided on the TV/STB to plug thedisplay panel into. RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT RS-232C DISPLAY CONTROL AUX CONTROL DIGITAL...
Page 15 - DVI Hookup to RJP or DVD Player
P A G E 1 5 Computer PC Hookup (DVI) Locate the DVI out port onthe RJP (Remote Jack Pack)or DVI device. Connect a DVI cablebetween the RJP and DVI inport on the TV/STB. If required, make Audioconnections as indicated tothe right. After all connections havebeen made, select the DVIsource to display t...
Page 16 - Selected; HDMI
P A G E 1 6 RJP INTERFACE REMOTE IN AUDIO IN AUDIO OUT RS-232C DISPLAY CONTROL AUX CONTROL DIGITAL VIDEO OUT AC IN DIGITAL AUDIOOUT (OPTICAL) AC OUT DIGITAL VIDEO IN MAX 8A 960W AC 120V~ 60Hz 1 2 ..... ..... TV/Monitor HDMI (DVI) Source Selected . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 17 - Audio Connection – Digital Audio Optical Connections; Digital Audio Optical Output Connections to External Amplifier
P A G E 1 7 Audio Connection – Digital Audio Optical Connections Hook up a Digital Audio Amplifier System using the Digital Audio Optical Out port, according to the diagramabove.Select the Digital Audio Optical input source on the Amplifier. Digital Audio Optical Output Connections to External Ampli...
Page 18 - On-Screen Menus Overview; Descriptions of the menus and on-screen displays.
P A G E 1 8 On-Screen Menus Overview ON-SCREEN MENUS CHANNEL MENU Adjusts the basic operational features of the TV. Auto Program 22 Automatically finds and stores active channels to scroll through using Channel Up/Down. Channel List 23 Manually picks and chooses which active channels will appear whe...
Page 20 - User Remote Control Key Functions
P A G E 2 0 User Remote Control Key Functions A list of the keys and their functions on the user remote control supplied with the HD Integrator BoxSystem. POWER MUTE TV/AV CH PREVIEW GUIDE SAP INFO 1 2 3 4 5 6 7 - 8 9 0 CC TIMER FLASHBK CH CH VOL OK VOL ALARM MUTE Turns sound Off and On, while the p...
Page 21 - Installer Remote Control Key Functions
P A G E 2 1 Installer Remote Control Key Functions A brief list of the keys on the optional installer’s remote and what they do. MUTE Turns sound Off and On, while the pictureremains. CHANNEL (-/+) Tunes to next available channel. ENTER (OK) Press to view the Channel/Time display orto remove any on-...
Page 23 - For broadcast channel numbers, key in the Physical channel
P A G E 2 3 Channel List Press the MENU button and then use the ADJ D or E button to highlight the Channel menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Channel List and press the OK (Enter) button. Use the ADJ D or E button to highlight the channel you wish to delete ...
Page 24 - Channel Labels Setup
P A G E 2 4 Channel Control (Continued) - Channel Labels help the user identify the channel or network being viewed.In the Setup menu with the Channel Labels option highlighted, usethe ADJ D E F G buttons to scroll through the available channel labels, such as, A&E, AMC, ESPN, HBO, etc. These ar...
Page 25 - Channel Control; Checking the Strength of the Digital Signal
P A G E 2 5 Channel Control Press the MENU button and then use the ADJ D or E button to highlight the Channel menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Signal Strength and press the OK (Enter) button. View the on-screen signal strength monitor to see the qualityof ...
Page 26 - Manual Time Settings; If you intend to use the On-Off Timers, it is best to set the
P A G E 2 6 Clock Setup (Continued) Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to the Time . Press the OK (Enter) button to highlight Clock . Manual or Auto will appear on the menu next to clock. Ifm...
Page 27 - Automatic Time Settings; TIME
P A G E 2 7 Clock Setup (Continued) Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to the Time . Press the OK (Enter) button to highlight Clock . Manual or Auto will appear on the menu next to clock. Sel...
Page 28 - Daylight Saving
Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to the Time . Press the OK (Enter) button to highlight Clock . Use the ADJ D or E button to highlight the Daylight Saving and press the OK (Enter) button. U...
Page 29 - TV Activation Time Settings; TV Deactivation Time Settings
Clock Setup (Continued) P A G E 2 9 Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to the Time . Press the OK (Enter) button to highlight Clock . Use the ADJ D or E button to highlight On Timer and press...
Page 30 - Clock Setup
P A G E 3 0 Clock Setup Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to the Time . Press the OK (Enter) button to highlight Clock . Use the ADJ D or E button to highlight Auto Off and press the OK (Ent...
Page 33 - TVPG Ratings; Fantasy or cartoon violence.
P A G E 3 3 V-Chip (Continued) P A G E 3 3 Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to highlight V-Chip and press the OK (Enter) button. Enter the 4 digits password. Use the ADJ D or E button to hi...
Page 34 - MPAA Ratings; Children under 13 should be accompanied by an adult.; PG; -13 Parental guidance suggested. Children under 13 should be
P A G E 3 4 V-Chip (Continued) Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to highlight V-Chip and press the OK (Enter) button. Enter the 4 digits password. Use the ADJ D or E button to highlight the ...
Page 35 - Canadian English Ratings; Expect No restriction.; Restricted. Viewers should be 14 or older.
P A G E 3 5 V-Chip (Continued) Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to highlight V-Chip and press the OK (Enter) button. Enter the 4digits password. Use the ADJ D or E button to highlight the C...
Page 36 - Canadian French Ratings
P A G E 3 6 V-Chip (Continued) Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to highlight V-Chip and press the OK (Enter) button. Enter the 4digits password. Use the ADJ D or E button to highlight the C...
Page 37 - Downloadable Rating
P A G E 3 7 V-Chip Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to highlight V-Chip and press the OK (Enter) button. Enter the 4digits password. Use the ADJ D or E button to highlight the D/L Rating an...
Page 38 - Pressing CC on the remote selects a captions option.; CAPTIONS
P A G E 3 8 Caption Menu (Continued) Press the MENU button and then use the ADJ D or E button to highlight the Caption menu and press the OK (Enter) button. Use the ADJ D or E button to highlight On / Off and press the OK (Enter) button. Use the ADJ D or E button to choose On or Off . When finished,...
Page 39 - Caption Menu; Digital Captions Mode; Digital Font Options
P A G E 3 9 Caption Menu Press the MENU button and then use the ADJ D or E button to highlight the Caption menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Digital Mode and press the OK (Enter) button. Use the ADJ D or E button to choose Service 1-Service 6 and press the ...
Page 40 - Digital Audio Output Settings
P A G E 4 0 Press the MENU button and then use the ADJ D or E button to highlight the Sound menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Digital Output and press the OK (Enter) button. Use the ADJ D / E buttons to choose Dolby Digital or PCM and press the OK (Enter) b...
Page 41 - Automatic Volume Control Settings; Analog Audio Settings
P A G E 4 1 Sound Menu (Continued) Press the MENU button and then use the ADJ D or E button to highlight the Sound menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Auto Volume and press the OK (Enter) button. Use the ADJ D or E button to choose On or Off . When finished, ...
Page 42 - Sound Menu; Digital Audio Settings
P A G E 4 2 Sound Menu Press the MENU button and then use the ADJ D or E button to highlight the Sound menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Multi-Track and press the OK (Enter) button. Use the ADJ D or E button to choose English, Spanish or French and press th...
Page 43 - Language Control; Menu Language
P A G E 4 3 Language Control Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Menu Language and press the OK (Enter) button. Use the ADJ D or E button to highlight and set the Menu Language: E...
Page 44 - Set ID
P A G E 4 4 Set ID Press the MENU button and then use the ADJ D or E button to highlight the Setup menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Set ID and press the OK (Enter) button. Use the ADJ D or E button to choose 1-99 numbers and press the OK (Enter) button. Wh...
Page 45 - Color Temperature Settings
P A G E 4 5 Picture Menu (Continued) Press the MENU button and then use the ADJ D or E button to highlight the Picture menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Mode and press the OK (Enter) button. Use the ADJ G button to choose a preset picture setup. When finish...
Page 46 - Manual Picture Adjustment
P A G E 4 6 Picture Menu (Continued) Press the MENU button and then use the ADJ D or E button to highlight the Picture menu and press the OK (Enter) button. Use the ADJ D or E button to highlight Mode and press the OK (Enter) button. Use the ADJ G button to choose Manual and use ADJ D E F G buttons ...
Page 47 - Picture Menu; Noise Reduction
P A G E 4 7 Picture Menu Press the MENU button and then use the ADJ D or E button to highlight the Picture menu and press the OK (Enter) button. Use the ADJ D or E button to choose Noise Reduction and press the OK (Enter) button. Use the ADJ D or E button to choose On or Off . When finished, press t...
Page 48 - Installer Overview; Following is the Commercial Mode Operation Setup.; the TV is tuned to an active digital channel with digital captions.; Typical Installer Menu
P A G E 4 8 Installer Overview Following is the Commercial Mode Operation Setup. Operating Installer Menu To set up the controls for the TV you will need to know how to enterthe TV/STB Installer menu and make changes to the default valuesas required. If necessary, familiarize yourself with the TV/ST...
Page 49 - Commercial Mode Setup; Disconnect all Aux inputs. Under certain conditions, Auto Program; ENTER
P A G E 4 9 Commercial Mode Setup This page provides an overview of the TV configuration. See the pages listed below for morespecific, detailed instructions at each step; how to access and use the Installer menu etc. *Note1: Disconnect all Aux inputs. Under certain conditions, Auto Program (Channel ...
Page 50 - Cloning Connections/Learning Setup; Turn to the next page to continue Cloning Setup.
P A G E 5 0 Cloning Connections/Learning Setup Connections for the LT2002 Clone Programmer to Learn the TV/STB Master TV Setup. *Notes: It is assumed that the TV/STB is connected to a signal source, the source selected is Antenna (RF) In, the signal is from an Analog channel, not a digital channel, ...
Page 51 - Clone Programmer Learning Setup; Learning the Master TV Setup; Learn Setup from Master TV/STB; When using the clone programmer for teaching or learning,; LT2002 Clone Programmer Communication Problems; • A slow flashing green light indicates there are communication
Clone Programmer Learning Setup Learning the Master TV Setup Instructions for the Clone Programmer to Learn the Master TV/STB Setup. Use MPI Cable to Connect LT2002 Clone Programmer toMaster TV/STB MPI Port If there is a good connection, “THE CLONE HAS CONTROL OF TV” messagewill appear. Press any ke...
Page 52 - Cloning Connections / Teaching Setup; Teaching the Master Setup to Another TV/STB; Disconnect TV/STB Power for 15 Seconds
P A G E 5 2 Cloning Connections / Teaching Setup Teaching the Master Setup to Another TV/STB Connections for the LT2002 to Teach another TV/STB the Master Setup Teach Master TV/STB’s Setup to the targetTV/STB After learning is complete, remove the M.P.I. cable from themaster TV/STB and connect it to...
Page 53 - Accessing the Installer’s Menu; Any changes you make will be stored in non-; Using the Installer’s Menu; Menu Item; For operation with RJP series, set item 040
Installer Menu (Continued) Typical Installer Menu HCS5610XX PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA 09F1 PTC V1.00.000 CPU V1.01.00 Use the Installer’s Menu to set up or change operational settings.See more detailed descriptions of the Installer menu items on the following ...
Page 55 - Detailed Descriptions of Installer Menu Items; 00 - INSTALLER SEQUENCE; Specifies entry sequence to the Installer Menu.
Installer Menu (Continued) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. ThePOWER MANAGE functi...
Page 56 - Set to 1 for operation with systems from On Command Corporation.
P A G E 5 6 Installer Menu (Continued) The value range is 0 to 63, with 63 as the default, which gives theuser the full range of volume control, if item 008 MIN VOLUME isalso set at 0. Change values with ADJ Left/Right arrow keys. It maybe best to set the same value on every TV/STB. *Note: The maxim...
Page 58 - Installer Menu; 04 - START MINOR CHANNEL
P A G E 5 8 Installer Menu 094 - SAP MENU EN (2nd Audio Program) Set to 1 to enable SAP feature, if available.Set to 0 to disable SAP feature. 096 - DEF. ASP. RATIO (Default Aspect Ratio) Selects default aspect ratio at power up, see settings below. 102 - ATSC BAND Sets up TV to receive different ty...
Page 59 - Clonable Menu Features; Channel; Sound; Mode; Reference: TV Features / Menus that can be Cloned
Clonable Menu Features Channel Auto Program (Activechannels found withthe channel search)Channel LabelsChannel ListFine Tune Picture Mode ContrastBrightnessColorSharpnessTint Color TemperatureScreen FormatFilm Mode Sound Mode TrebleBass BalanceAuto VolumeMulti-TrackInternal Speaker Setup Time ClockA...
Page 60 - Editing/Adding Channel ICONs and/or Labels; To Do Channel Editing/Labeling, proceed as follows; To exit the menu when done press “MENU”.; • MENU; Changing Source Labels on Master TV; XYZ; NETWORK
P A G E 6 0 Reference: Procedures for adding Channel Label Icons/Custom Channel Labels (2-5-4 + MENU Mode) Adding Channel Icons and Labels in the 2-5-4 + Menu Mode Installer Remote Control Key Functions for Master TV Channel Editing/Labeling Menu Editing/Adding Channel ICONs and/or Labels If there i...
Page 61 - Reference: Detailed Information For Making A Master TV; Installer remote control; Making a Master TV; Detailed Instructions; Clonable Menu
Reference: Detailed Information For Making A Master TV IMPORTANT INSTALLER SETUP INFORMATION! PLEASE READ THE FOLLOWING... To set up a master TV you will need to know how toenter the TV/STB Installer menu and make changes tothe default values as required. If necessary, familiarizeyourself with the T...
Page 62 - Reference: Software Version Check; Procedure to Check Software Version
P A G E 6 2 Reference: Software Version Check Procedure to Check Software Version The software version of the TV/STB may be checked by accessing the INSTALLER MENU. To do this, press the MENU button at least 10 timesuntil the menu display ceases to respond to MENU key presses.Then, press "9"...
Page 63 - TV/STB Aux Input Configuration
TV/STB Aux Input Configuration TV/STB Aux Input Configuration DIRECT ACCESS Tuning OLD_OCV =0 130 90 Video2 (Front) CV ONLY 34 CAMPORT_EN 0x01 0 Video Front (Camport) 0(VIDEO) 2 Video Front (Camport) 131 91 Video1(Rear) CV ONLY DTV/PC Auto 39 REAR_AUX_EN 0x02 1 Rear Video (Aux) 0(VIDEO) 1 Rear Video...
Page 64 - RS-232C Null Configuration; RS-232 Communication Requirments; Pin Name; RS-232C Straight Configuration; - Displays ‘No Signal’ message at Power Off; TV/STB does not power Off TV and displays ‘No Signal’ message.; RS-232 Troubleshooting
P A G E 6 4 TV/STB RS-232 Monitor Requirements / RS-232 Troubleshooting Type of Connector; D-Sub 9-Pin Female Monitors listed below require RS-232 Null Modem DB9 Cablewith male connectors at each end. Depending on the type ofNull modem cable, one or two gender changers may be required. 3-Wire Config...
Page 65 - Connecting the cable; adjust the OSD menu from your PC.; Communication Parameter; PC; Key; OK Acknowledgement; Transmission / Receiving Protocol; Transmission
RS-232C Control Use this method to connect several products to a single PC.You can control several products at a time by connecting them to a single PC. Connecting the cable Connect the RS-232C cable as shown in the picture.- The RS-232C protocol is used for communication between the PC and product....
Page 66 - Function
P A G E 6 6 RS-232C Control Data Key code : Refer to page A18. [m][c][ ][Set ID][ ][Data][Cr] Transmission [c][ ][Set ID][ ][OK][Data][x] Acknowledgement G To send IR remote key code. 1. Key(Command : m c) Code(Hexa) Function Note 00 Channel Up Button 01 Channel Down Button 02 VOL(+) R/C Button 03 V...
Page 67 - Symptoms; Some quick and easy tips to resolving problems
P A G E 6 7 Troubleshooting Troubleshooting Symptoms Possible Cause(s) Possible Solution(s) See Page(s) Software Corrupted. Virtual and Physicalchannels appear inchannel scan w/ChannelUp/Down. Can not direct enterchannel number Channel not included inchannel scan in TV controller. After 2-5-5 + MENU...
Page 68 - Reference: Cloning Procedure Troubleshooting; Reset Clone After Static Shock; Clone Programmer
P A G E 6 8 Reference: Cloning Procedure Troubleshooting • Procedure interrupted. • Different TV models. • Step(s) omitted or not performed.• Insufficient cloning time. • Cloning erratic. - Wait until procedure complete message is displayed.- Cloning is only possible with identical model TVs.- Rerea...
Page 69 - Troubleshooting Flow Chart
Page 70 - Installer Quick Setup Guide; Instructions for Making a Master TV/STB Setup; reset TV to default condition.; requirements, enter the installer menu. Press; ‘MENU’; to start the transfer
P A G E 7 0 Installer Quick Setup Guide See the installation and setup guide of the particular TV for more information. *Note: After installing a Pay-Per-View card, be sure to remove and reconnect the TV/STB AC power cord. Instructions for Making a Master TV/STB Setup 1. Connect TV/STB to signal sou...
Page 71 - Glossary of Terms; A list of definitions for some of the words found in this guide; Programming provided by a cable service.
Glossary of Terms A list of definitions for some of the words found in this guide 75 OHM RF CABLE The wire that comes from an off-air antenna orcable service provider. The end looks like a hex-shaped nut with a wire sticking throughthe middle. It screws onto the Antenna/Cablethreaded jack on the bac...
Page 72 - Zenith HD Commercial Interface STB Warranty; For Customer Support/Service; LG’S RESPONSIBILITY
Zenith HD Commercial Interface STB Warranty For Customer Support/Service Please call: 1-888-865-3026 www.zenith.comwww.lgcommercial.com P/NO : 3350GDKM0017D GPN08MA039A Welcome to the LG family! We believe that you will be pleased with your HD Commercial Interface STB. Please read this warrantycaref...
