YARD FORCE RVX4E - User Manual
YARD FORCE RVX4E Robotic Lawn Mower – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Device operating fault information is storaged in “ Fault record ”; OPERATION; ON
- Page 3 – MAINTENANCE AND STORAGE
- Page 4 – Cleaning the underside; Clean the contact pins and the charging strips; WARNING; To ensure maximum cu; tti; blade mounting parts when replacing.; Spare parts list
20
21
Hotline: 1-866-902-9690
Hotline: 1-866-902-9690
OPERATION
Control panel
Initial interface
when power on your robotic mower, after entering the defult PIN 0000, you will see the initial interface on
the display.
Enter PIN Code
*
*
*
*
Four times
S1 2021-03-15 12:52 68%
Standby
Sat
Fri
Thu
Wed
Tue
Mon
Sun
T2: 14:00 - 16:00
T1: 08:00 - 10:00
。
*NOTE: Inverted color means date was selected.
Mon
Mon
Before starting your robotic mower
Please follow below steps to adjust the time setting before starting your robotic mower.
1. Press the
button to enter the menu setting.
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting
2. Press the
button or use the navigation key + OK button to enter System date and time setting
System date and time
2021-03-15 12:52
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting
3. Press the
button or use the navigation key + OK button to enter Working day and time setting
Working day and time setting
1. Set working day
2. Set working time
Set working day
Sun
Sat
Fri
Thu
Wed
Tue
Mon
1
2
3
4
5
6
7
Set working Time
1
2
3
4
5
6
7
T1 08:00-11:00
T2 16:00-18:00
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting
Sun
Sat
Fri
Thu
Wed
Tue
Mon
NOTE:
If the working day is activated, then the blinking cursor will move to specified time setting
4. Press the
button or use the navigation key + OK button to enter Pin code reset
Enter old pin code
*
*
*
*
Enter new pin code
*
*
*
*
Enter repeat new pin code
*
*
*
*
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting
5. Press the
button or use the navigation key + OK button to enter sensor setting
Wireless setting
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting
WIFI configure
1. WIFI configure
2. Connection status
3. Direct mode
Enter WIFI confiuration proces
Please complete the setting with
your mobile phone
Connection Status
Connected to server
Device MAC: XXXXXXXXXXXX
OPERATION
Boundary signal status
Battery pack
remaining capicity
*Robotic mower
working date
Current mower
status
*Robotic mower
working time
Robotic mower system date and time
WIFI / AP connection status
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
22 23 Hotline: 1-866-902-9690 Hotline: 1-866-902-9690 AP mode This is the Hotkey to enterWireless setting 1. ON 2. OFF 6. Press the button or use the navigation key + OK button to enter Sensor setting Sensor setting SETTING FUNCTION1. System date and time2. Working date and time3. Pin code reset4. W...
24 25 Hotline: 1-866-902-9690 Hotline: 1-866-902-9690 Cutting height adjustment The cutting height can be adjusted by rotating the height adjustment dial located on the top of the machine. Cutting height range from 1-1/3“-3”. NOTE! We recommend using an ordinary lawn mower or trimmer to cut the lawn...
26 27 Hotline: 1-866-902-9690 Hotline: 1-866-902-9690 1. Ensure the main power switch is turned OFF. Clean the underside as instructed.2. Set the Autonomous Mower to the lowest cutting height.3. Turn the mower upside-down. Remove the 5 screws fixing the battery compartment's lid. Note one screw is p...