Whistler BT3200 - Manual

Storing When the unit is not in use please consider the following steps. 1). When not using the headset, please store it in a dry place and switch it off to save battery power. 2). Do not place it in direct sunlight or extremely hot temperatures. 3). Store all accessories in a dry place. Recharging ...

Select mounting method based on helmet type. 1) Using Bracket A (for attaching to helmet)incl. 3M adhesive tape. Recommened to be placed on the left hand side 2) Using Bracket B (for attaching to the helmet) Please note: Not possible with every helmet type Please note: Equipment will vary due to hel...

The volume adjustment will be acknowledged as tones through the speakers. Key Function [+] KEY [-] KEY MASTER KEY [M] TALK KEY [T] RESET MUTE KEY Button Callouts Button Functions 14 15 ACTIVATE/DEACTIVATE CHANNEL 2 INCREASE VOLUME ACTIVATE/DEACTIVATE CHANNEL 1 DECREASE VOLUME PAIRING CHANNEL 2 AS MA...

Function Key/Action/LED Signal Normally, you can connect every Bluetooth cell phone to the headset. However,depending on the phone type, some functions cannot be operated through the headset.This includes the automatic music rendering after a call, redialing, or other functions.Therefore, if you hav...

Connecting the headset with cell phone. 1). Activate the Bluetooth function of you phone and start searching for other phones in our environment. If necessary, make use of your mobile phone manual. Please make sure that all other Bluetooth devices in your environment as well as all channels of other...

Operating and disconnecting the audio device 1). You can adjust the volume of the audio device with the [+] & [-] keys of the headset. 2). You can start and stop the music with the Mute key. 3). If the audio device is out of range from the headset, the connection will be interrupted. 4). If the ...

Vox Function (continued) 4). When activating the VOX after is has turned off, a delay of 3 seconds is required before resuming conversation. The activation of the VOX will provide a sound in the headset. 5). Depending on the helmet type and motorcycle, ambient noises could activate the VOX at higher...

Technical Data BT2200/2300 BT3200/3300 Bluetooth version Version 2.0 Frequency 2.4 GHz ISM Band (2.4 – 2.4835 GHz) Output 0 dBm +17 dBm Bluetooth Class Class 2: 10m Class 1: 100m Channel/Devices 2/3 Operating Temperature -20 ~ 50 degrees C Dimensions 84(W) x 44.5(H) x 20.5(D) mm Weights 50g Specific...

Problem: The voice over the microphone is too low. Please make sure that the boom microphone is correctly placed close to your mouth. Thewhite marking has to be in the direction of your mouth (BT2200/3200). In addition, themicrophone sensitivity can be adjusted as required (page 24). Problem: The ca...

If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.-- Increase...

Service Under Warranty (continued) Due to the specialized equipment necessary for testing this product, there are no authorized servicestations for Whistler products other than Whistler. When returning a unit for service under warranty, please follow these instructions: 1. Ship the unit in the origi...