Whirlpool W10258095A - Manual
Whirlpool W10258095A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION REQUIREMENTS; Tools and Parts; Tools needed; If using a power supply cord:; Location Requirements; IMPORTANT: Observe all governing codes and ordinances.; Mobile Home - Additional Installation Requirements; Mobile home installations require:; Product Dimensions
- Page 3 – Cabinet Dimensions; Electrical Requirements; Do not use an extension cord.; Electrical Connection; * The NEC calculated load is less than the total connected load; Amps
- Page 4 – INSTALLATION INSTRUCTIONS; Unpack Range; Remove oven racks and parts package from inside oven.; WARNING; Excessive Weight Hazard
- Page 5 – Install Anti-Tip Bracket; Remove the anti-tip bracket that is taped in the storage; wall or floor with the two #12 x 1; Tip Over Hazard
- Page 6 – Use Phillips screwdriver to remove the terminal block cover; screw located on the back of the range.; Remove plastic tag holding three #10-32 hex nuts from the; middle post of the terminal block.; Style 1: Power supply cord strain relief; Assemble a UL listed strain relief in the opening.; Style 2: Direct wire strain relief; Power Supply Cord
- Page 9 – Direct Wire Installation: Copper or Aluminum Wire; Mobile homes; Bare Wire Torque Specifications; gauge copper
- Page 10 – Pull the conduit through the strain relief on cord/conduit plate; Wire Awg
- Page 11 – If you need Assistance or Service:
- Page 12 – Moving the Range; If removing the range is necessary for cleaning or maintenance:; look underneath the bottom of the range:; look underneath the bottom of the range:
INSTALLATION INSTRUCTIONS
30" (76.0 CM) FREESTANDING ELECTRIC RANGES
RANGE SAFETY
Table of Contents
RANGE SAFETY ............................................................................. 1
INSTALLATION REQUIREMENTS ................................................ 2
Tools and Parts ............................................................................ 2
Location Requirements ................................................................ 2
Electrical Requirements ............................................................... 3
INSTALLATION INSTRUCTIONS ..................................................4
Unpack Range..............................................................................4
Install Anti-Tip Bracket .................................................................5
Electrical Connection ...................................................................6
Verify Anti-Tip Bracket Location ................................................11
Level Range ................................................................................11
Complete Installation..................................................................11
Moving the Range ......................................................................12
IMPORTANT:
Save for local electrical inspector's use.
W10258095A
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death or serious burns to children and adults.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed Parts supplied Check that all parts are included. ■ 3 - #10-32 hex nuts (attached to terminal block) ■ 3 - ...
3 Cabinet Dimensions Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height. IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood...
4 The fourth (grounding) conductor must be identified by a green or green/yellow cover and the neutral conductor by a white cover. Cord should be Type SRD or SRDT with a UL listed strain relief and be at least 4 ft (1.22 m) long. The minimum conductor sized for the copper 4-wire power cord are: 40-a...
