Whirlpool UXB1170KYS - Installation Manual
This compatibility guide for KitchenAid ranges and ventilation systems helps users pair gas or electric freestanding ranges with suitable under-cabinet, wall/island mount, downdraft, or pro-style hoods based on model specifications. The document emphasizes matching control types (e.g., rear/front controls) and motor airflow ratings to ensure proper installation clearance and ventilation efficiency. Key topics include range-hood pairing logic, CFM motor class requirements, and critical safety warnings for correct setup.
Table of Contents:
- Page 1 – Gas Freestanding Range and Hood Compatibility
- Page 2 – Electric Range and Hood Pairing with Control Types
- Page 3 – Commercial Range/Top and Ventilation Compatibility
- Page 4 – Gas Cooktop and Ventilation Pairing Chart
- Page 5 – Electric Cooktop and Ventilation Pairing Chart
UNDER CABINET HOODS
30” -
KVUB400GSS
36” -
KVUB406GSS
30” -
KVUB600DSS
36” -
KVUB606DSS
30” -
KXU2830JSS
36” -
KXU2836JSS
KFGG500E
KSGB900E
KFGD500E
YKSDB900ESS
KFDD500ESS
KSGG700E
KSDG950ESS
GAS FREESTANDING RANGES AND VENTILATION
PAIRING GUIDE
WALL MOUNT AND
ISLAND MOUNT HOODS
30” -
KVWB400DSS
36” -
KVWB406DSS
30” -
KVWB600HBS
36” -
KVWB606HBS
36” -
KVIB606DSS
PRO STYLE VENTILATION
AND LINERS
30” REAR CONTROL
30” FRONT CONTROL
GAS FREESTANDING RANGES
** Motor Class CFM rating
Observe all governing codes and ordinances. Have a qualified technician install the range hood. It is the installer’s responsibility to comply with
installation clearances specified on the model/serial/rating plate. The model/serial/ rating plate is located inside the range hood on the rear wall
of the range hood. Canopy range hood location should be away from strong draft areas, such as windows, doors and strong heating vents.
Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance. The canopy range hood is factory
set for venting through the roof or through the wall. All openings in ceiling and wall where canopy range hood will be installed must be sealed.
IMPORTANT:
Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information.
Refer to installation instructions packaged with product before selecting cabinetry, making cutouts or beginning installation.
30”
-
KVUC600KSS
36”
-
KVUC606KSS
36”
-
KVWC906KSS
48”
-
KVWC908KSS
36”
-
KVWC956KSS
48”
-
KVWC958KSS
30”
-
UVL5430JSS
36”
-
UVL6036JSS*
48”
-
UVL6048JSS*
*
Custom
hood
liners
can
be
used
with
any
of
the
following
blower
motors:
UXB1170
KYS
(1,170
CFM),
UXI1200DYS
(1,200
CFM),
UXB0585
KYS
(585
CFM)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Whirlpool
- Model
- UXB1170KYS
- Document type
- Installation Manual
- Language(s)
- English
- Pages
- 5
- File size
- 725.8 KB
- Format
Summary
Compatibility guide for gas freestanding ranges and ventilation hoods, detailing compatible models based on control type and hood mounting style, along with motor ratings and installation clearances.
Guide showing compatibility between electric freestanding ranges and ventilation hoods categorized by hood type and range control type (30" rear or front), including CFM ratings and installation requirements.
Compatibility chart for commercial-style ranges/range tops with various hood and ventilation models, including under-cabinet, wall/island mount, downdraft, and pro-style units.