Whirlpool GD5RVAXVY01 - Installation Manual
Whirlpool GD5RVAXVY01 – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Instruction Sheet W11036888 Rev A 10/16
Instruction Sheet
for Handle Kit
— 1 —
1. Remove handles from doors by lifting directly upward.
NOTE:
Some products may have handles mounted with set
screws. You will need to loosen the set screws with a hex wrench.
2. Remove the mounting screws from the doors.
NOTE:
Some products may have mounting brackets. You will
need to remove them as well.
3. Secure the four (4) shoulder screws from the handle kit into
the existing holes in the refrigerator and freezer doors using
a Phillips screwdriver.
4. Position the handle above the shoulder screws mounted on
the door. See
Figure 1
.
5. Apply firm pressure on the handle to slide it down onto the
shoulder screws.
NOTE:
Do not push the handle toward the door, this can damage
the door. Only apply pressure downward.
6. Repeat steps 4 and 5 to install the freezer door handle.
2 Handles
4 Shoulder Screws
1 Instruction Sheet
Kit Contains:
figure 1
© Whirlpool Corporation 2016
(All Rights Reserved)
Instruction Sheet W11036888 Rev A 10/16
— 1 —
© Whirlpool Corporation 2016
(All Rights Reserved)
Instruction Sheet
for Handle Kit
1. Remove handles from doors by lifting directly upward.
NOTE:
Some products may have handles mounted with set
screws. You will need to loosen the set screws with a hex wrench.
2. Remove the mounting screws from the doors.
NOTE:
Some products may have mounting brackets. You will
need to remove them as well.
3. Secure the four (4) shoulder screws from the handle kit into
the existing holes in the refrigerator and freezer doors using
a Phillips screwdriver.
4. Position the handle above the shoulder screws mounted on
the door. See
Figure 1
.
5. Apply firm pressure on the handle to slide it down onto the
shoulder screws.
NOTE:
Do not push the handle toward the door, this can damage
the door. Only apply pressure downward.
6. Repeat steps 4 and 5 to install the freezer door handle.
2 Handles
4 Shoulder Screws
1 Instruction Sheet
Kit Contains:
figure 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
