Whirlpool ED5FHEXVS01 - Installation Manual

This installation manual covers the assembly of a handle replacement kit specifically designed for refrigerator doors, focusing on compatibility with certain Whirlpool SXS model refrigerators. The guide highlights essential topics like selecting the right components–including shoulder screws–and provides clear procedural guidance for removing existing handles and securing new ones. It also emphasizes practical considerations such as ensuring proper alignment and tightening to maintain safety and functionality.

Loading the manual

Instruction Sheet W11036888 Rev A 10/16

Instruction Sheet

for Handle Kit

— 1 —

1. Remove handles from doors by lifting directly upward.

NOTE:

Some products may have handles mounted with set

screws. You will need to loosen the set screws with a hex wrench.

2. Remove the mounting screws from the doors.

NOTE:

Some products may have mounting brackets. You will

need to remove them as well.

3. Secure the four (4) shoulder screws from the handle kit into

the existing holes in the refrigerator and freezer doors using
a Phillips screwdriver.

4. Position the handle above the shoulder screws mounted on

the door. See

Figure 1

5. Apply firm pressure on the handle to slide it down onto the

shoulder screws.

NOTE:

Do not push the handle toward the door, this can damage

the door. Only apply pressure downward.

6. Repeat steps 4 and 5 to install the freezer door handle.

2 Handles
4 Shoulder Screws
1 Instruction Sheet

Kit Contains:

figure 1

Instruction Sheet W11036888 Rev A 10/16

— 1 —

Instruction Sheet

for Handle Kit

1. Remove handles from doors by lifting directly upward.

NOTE:

Some products may have handles mounted with set

screws. You will need to loosen the set screws with a hex wrench.

2. Remove the mounting screws from the doors.

NOTE:

Some products may have mounting brackets. You will

need to remove them as well.

3. Secure the four (4) shoulder screws from the handle kit into

the existing holes in the refrigerator and freezer doors using
a Phillips screwdriver.

4. Position the handle above the shoulder screws mounted on

the door. See

Figure 1

5. Apply firm pressure on the handle to slide it down onto the

shoulder screws.

NOTE:

Do not push the handle toward the door, this can damage

the door. Only apply pressure downward.

6. Repeat steps 4 and 5 to install the freezer door handle.

2 Handles
4 Shoulder Screws
1 Instruction Sheet

Kit Contains:

figure 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.