Wharfedale RS-10 - Manual
Wharfedale RS-10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PRELIMINARIES; UNPACKING YOUR LOUDSPEAKERS; Two RS-10 satellite speakers; PREPARATIONS FOR INSTALLATION; STANDS AND BRACKETS; To connect the terminals:; CONNECTORS AND CABLES; Delay Settings; CARE AND SERVICE
- Page 3 – WALL MOUNTING; FRONT LOUDSPEAKERS; ANGLED; Place the speaker on a soft surface.; BRACKET POSITIONS - FRONT AND REAR SPEAKERS; STAND MOUNTING; SATELLITE SPEAKERS; Speaker; To AV
- Page 4 – TV; HOME THEATRE LAYOUT; RIGHT; REAR; SUBWOOFER; PROCESSOR; FRONT
BRITAIN'S MOST FAMOUS LOUDSPEAKERS
RS-10
Home Cinema
Loudspeaker System
Instruction Manual
Bass/mid unit
Tweeter
Rec. Amplifier
Nominal Impedance
A/V shielding
Sensitivity
(1W @ 1M)
Freq Range
(-6dB)
HF limit
(-10db)
Crossover Frequency
Freq
(Fb)
Size
(H x W x D)
Height on shelf stand
Height on floor stand
Carton Quantity
Included Accessories
Optional Accessories
100mm (4") kevlar cone x 2
25mm textile
20 - 120 w
6 Ohms*
Yes
87db
85Hz - 24kHz
44Khz
2.8Khz
95Hz
600 mm x 127 mm x 95 mm
615 mm
1225 mm
Pair
2 x wall brackets
Table Stands (pair pack)
Floor Stands (pair pack)
100mm (4") kevlar cone x 2
25mm textile
20 - 120 w
6 Ohms*
Yes
87db
85Hz - 24kHz
44Khz
2.8Khz
95Hz
127 mm x 600 mm x 95 mm
137 mm
Single
1 x wall bracket
1 x shelf stand
SPECIFICATIONS
RS-10 Satellite
RS-10 Centre
Wharfedale International Ltd., IAG House, Sovereign Court, Ermine Business Park, Huntingdon, Cambs PE29 6XU, England.
Tel:+44 (0)1480 447700 www.wharfedale.co.uk
Wharfedale is a member of the International Audio Group.
* Compatible with amplifiers requiring 8 Ohm loudspeakers.
Wharfedale reserves the right to change specification without notice.
*Table stands shown are optional extras
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Before making any connections, switch the amplifier off.When you switch on your system or change sources, set the volume control at minimum and turn the level up gradually.DO NOT use your amplifier at full volume. Ensure that all loudspeakers in the system are correctly wired.DO NOT subject your lou...
WALL MOUNTING FRONT LOUDSPEAKERS If the mounting position is higher than 1500mm it is preferable to angle the speaker. Otherwise mount the loudspeaker vertically. REAR LOUDSPEAKERS If the loudspeakers are sited behind the listener on a rear wall, it is advisable to mount them high, around 1800mm and...
CONNECTING THE LOUDSPEAKERS Connect each loudspeaker to the correct channel of your AV amplifier or processor taking care to connect the Red, Positive (+) terminal of the speaker to the Red, Positive (+) terminal of the speaker output terminal of the amplifier, and similarly with the Black (–) termi...
