Page 2 - lis; TABLE OF CONTENTS
E n g lis h TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS ................................................................. i DIGITAL TELEVISION TRANSITION NOTICE ............................ 1 ENERGY STAR DISCLAIMER ..................................................... 1 IMPORTANT INFORMATI...
Page 3 - ii
E n g lis h TABLE OF CONTENTS POWER CONNECTION ............................................................. 20 CONNECTING AC POWER................................................... 20 INITIAL SETUP ...................................................................... 20 ANTENNA OR COAXIAL CABLE C...
Page 4 - DIGITAL TELEVISION TRANSITION NOTICE; This Westinghouse product has earned the ENERGY STAR
E n g lis h DIGITAL TELEVISION TRANSITION NOTICE DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12...
Page 5 - IMPORTANT INFORMATION
E n g lis h E n g lis h IMPORTANT INFORMATION IMPORTANT INFORMATION War nings To reduce the risk of fire or electric shock: • Do not expose this product to rain or moisture. • Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified serv...
Page 6 - C o r d Typ e
E n g lis h IMPORTANT INFORMATION NOTICES Important Notices Concerning Power Cord Selection The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed power cord to prevent electric shock. Observe the following guidelines if it...
Page 7 - • Reorient or relocate the receiving antenna.; FCC Warning
E n g lis h IMPORTANT INFORMATION FCC COMPLIANCE STATEMENT This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa...
Page 9 - Never cover the slots and openings with a cloth or other materials.
E n g lis h IMPORTANT INFORMATION Cir cuit Over load Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock. Power Cor d Pr otection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon ...
Page 11 - Outdoor Antenna Grounding; Lightning; DO NOT; disconnect the antenna or the power cord during; Power lines
E n g lis h IMPORTANT INFORMATION ANTENNA INSTALLATION SAFETY Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code...
Page 12 - • Make sure the LED TV is turned off and the power cord is; To clean the screen; Dolby License Notice; is a trademark of SRS Labs, Inc. TruSurround HD technology is; Licensing and Patent Infor mation
E n g lis h IMPORTANT INFORMATION CLEANING THE LED TV • Make sure the LED TV is turned off and the power cord is disconnected from the power outlet. • Never spray or pour any liquid directly onto the screen or the case. To clean the screen : 1 W ipe the screen with a clean, soft, lint-free cloth. Th...
Page 13 - PACKAGE CONTENTS
E n g lis h PACKAGE CONTENTS PACKAGE CONTENTS 37 ” LED TV Unit Remote Control (with 2x AAA batteries) LED TV Base User Manual Power Cord Warranty Card AC Adapter Quick Connect Guide Screws for Base Screw for Base 10
Page 14 - CONTROL PANEL; I te m; Toggles the power on and off.
E n g lis h CONTROL PANEL CONTROL PANEL I te m D es c ri p ti on 1. Power Toggles the power on and off. 11
Page 15 - TERMINALS; I t em
E n g lis h TERMINALS TERMINALS A A UD IO IN VI DEO L IN R L OUT R I t em F u nc t io n 1. DC IN Connects the AC to DC adapter from this outlet to a power source 2. COAX OUT Connects to an external analog audio receiver 3. HDMI1/2 Connects to an external AV device such as a VCR, DVD player, set-top ...
Page 16 - REMOTE CONTROL
Page 17 - REMOTE CONTROL OPERATION; INSTALLING THE REMOTE CONTROL BATTERIES; C AU T I O N S; may pose a fire risk or lead to personal injury.; REMOTE CONTROL TRANSMISSION RANGE
REMOTE CONTROL OPERATION REMOTE CONTROL OPERATION INSTALLING THE REMOTE CONTROL BATTERIES C AU T I O N S : • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to the ...
Page 18 - LED TV BASE; INSTALLING THE LED TV BASE
E n g lis h LED TV BASE LED TV BASE C AU T I O N : Th e LE D TV u ni t ma y b e to o h ea vy f o r on e pe rs o n t o lift . I f th is is th e c ase , m ak e su r e to a sk fo r a ssi sta nc e in ha nd li n g th e LE D TV t o p r eve nt p h ys ic al i nj ur y a nd /o r d amag e to t he u ni t. INSTA...
Page 20 - ANTENNA CONNECTION; OUTDOOR ANTENNA CONNECTION
E n g lis h ANTENNA CONNECTION ANTENNA CONNECTION OUTDOOR ANTENNA CONNECTION Cable TV lead in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) 300 ohm twin-lead (flat) 300-75 ohm ADAPTER (Not supplied) RF IN Separate VHF/UHF Antenna VHF Antenna UHF Antenna 300 ohm twin-lead COMBI...
Page 21 - EXTERNAL DEVICE CONNECTIONS
EXTERNAL DEVICE CONNECTIONS • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel keys. EXT...
Page 22 - The following diagram shows the external device connections.
EXTERNAL DEVICE CONNECTIONS The following diagram shows the external device connections. 19 Power outlet AC to DC adapter Antenna cable / Cable TV line Audio cable Audio out VGA Audio amplifier RGB cable Power outlet 3.5 mm stereo mini jack cable Antenna cable / Cable TV line Composite AV cable DVI-...
Page 23 - POWER CONNECTION; CONNECTING AC POWER; Yes; to use the SetupWizard. The SetupWizard will
POWER CONNECTION POWER CONNECTION CONNECTING AC POWER I M P O R TAN T: Th e L E D TV i s des ig ne d to b e p o we re d vi a an A C adap t er. Us e O N LY t he A C a d ap te r in clu d ed i n th e pac kag e . Tu r n o ff al l c on nec te d d e vice s b ef o re p l ug gi ng t he A C ad ap te r i nto ...
Page 24 - to continue. Press Go Back to return
E n g lis h POWER CONNECTION ANTENNA OR COAXIAL CABLE CONNECTION SETUP Select Language Use remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use remote control to select your local time zone. Select “Next” and then press SELECT to continue. ...
Page 26 - Channel Scan in progress
E n g lis h POWER CONNECTION Channel Scan in progress The channel scan may take a while to complete. When the scan is complete, you will be able to watch your local TV programming. 23
Page 28 - Cable/Satellite Box Input; to search
E n g lis h POWER CONNECTION Cable/Satellite Box Input Use remote control to select the input connected to the set top box. Press SELECT to continue. Press Go Back to return to the previous screen. RF Warning Use the up and down arrows on your HDTV control panel or remote control to select. Select “...
Page 29 - Go Back to return to the previous screen.
E n g lis h POWER CONNECTION OTHER INPUT SOURCE CONNECTION SETUP Select Language Use remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use remote control to select your local time zone. Press SELECT to continue. Press Go Back to return to th...
Page 30 - Select Input Source
E n g lis h POWER CONNECTION Select Input Source Use remote control to select the input source. Press SELECT to continue. Press Go Back to return to the previous screen. 27
Page 32 - Let’s Get Connected
E n g lis h POWER CONNECTION Let’s Get Connected Select “Click here to connect a Game, Blu-Ray, DVD, or other player.” and press SELECT on your remote control. Press SELECT to continue. Press Go Back to return to the previous screen. Select Input Source Use the keys on your remote control to select ...
Page 33 - BASIC OPERATIONS; URNING THE POWER ON AND OFF
E n g lis h BASIC OPERATIONS BASIC OPERATIONS URNING THE POWER ON AND OFF Turning on the power Press on the control panel or on the remote control to turn on the LED TV. Turning off the power Press on the control panel or on the remote control to turn off the LED TV. The LED behavior will depend on ...
Page 34 - Using the Ch; SELECTING THE INPUT SOURCE; Using the Individual Input Keys
E n g lis h BASIC OPERATIONS CHANGING CHANNELS Follow the instructions below to change channels. Using the Ch / Buttons Browse channels To browse through the available channels, press Ch on the remote control or on the control panel. Using the Channel Keys Selecting channel To change to a certain ch...
Page 35 - Using the Input Key; ADJUSTING THE DISPLAY FORMAT
E n g lis h BASIC OPERATIONS Using the Input Key Select source using Input Key 1 Press Input . 2 A list of supported video sources is displayed. 3 Press / to select the preferred source. 4 Press to switch to the selected input source. ADJUSTING THE DISPLAY FORMAT The input source can sometimes affec...
Page 36 - SETUP MENUS; SETUP MENU OPERATION; Displaying the setup menu screen; Press; MENU; on the control panel to display the setup; Navigating the setup menu screen
E n g lis h HD MI 1 H DM I 2 SP DI F U SB SETUP MENUS SETUP MENUS SETUP MENU OPERATION Use the setup menus to configure the various operational settings of the LED TV. Displaying the setup menu screen Press on the remote control or MENU on the control panel to display the setup menu screen. Navigati...
Page 37 - PICTURE; Use the Picture sub-menus to configure the display quality.; Picture; Picture Settings
SETUP MENUS PICTURE Use the Picture sub-menus to configure the display quality. Press on the remote control to display the setup menu screen then select Picture to display the Picture sub-menu. The following options are available: Picture Mode, Sound, Time, Setup, Lock, Channel. Picture Settings Adj...
Page 38 - Picture mode; Adjusting Brightness; Contrast; Adjusting Contrast
SETUP MENUS Picture mode Use this sub-menu to select one of four preset view options optimized for different viewing conditions. The following options are available: • Energy Star: Select for power saving picture. • Retail: Select for enhanced picture contrast and sharpness • Movie: Select for a fin...
Page 39 - Color
E n g lis h SETUP MENUS Color Use Color to adjust the color intensity. Adjusting Color 1 Use the keys to select Color and press . 2 Press the keys on the remote control to adjust the Color level. 3 Press to save and exit the screen. Tint Use Hue to adjust the balance of the red, green, and blue colo...
Page 40 - Advanced Settings; aspect ratio
E n g lis h SETUP MENUS Advanced Settings Press / to selet the display aspect ratio till the picture is fit onto the screen. The options are different according to different input source. • Use the keys to select Noise Reduction, Press to select Low Medium and High • Use the keys to select Dynamic C...
Page 41 - SOUND; Sound; Equalizer
E n g lis h SETUP MENUS SOUND Use the Sound sub-menus to configure the sound quality. Press on the remote control to display the setup menu screen then select Sound to display the Sound sub-menu. The following options are available: Equalizer, MTS, Audio Language, Digital Audio Output, AVL, SRS TruS...
Page 42 - MTS; Adjusting MTS; Digital Audio Output
E n g lis h SETUP MENUS MTS The following options are available: • Mono: Allows mono output (useful when stereo is noisy or inconsistent). • Stereo: Allows stereo sound for superior TV viewing experience. • SAP: Allows second audio program from the speakers while watching a scene in the original pro...
Page 43 - Time; Sleep Timer; Time Zone; Adjusting Time
SETUP MENUS Time Use the Time sub-menus to configure the Time setting. Sleep Timer The following options are available: • Sleep timer: Off/ 5 min / 10 min / 15 min / 30 min / 60 min / 90 min / 120 min / 180 min/ 240 min/ . Adjusting Time 1 Use the / Keys to select Time and press 2 Press the keys on ...
Page 44 - Use the / Keys to select; Daylight Saving Time; and press; Daylight Saving Time.; Time Format; If set Auto Clock to Off, then you can set the time manually .; Clock
SETUP MENUS Daylight Saving Time 1 Use the / Keys to select Daylight Saving Time and press 2 Press repeatedly to check(enable) or uncheck(disable) Adjust for Daylight Saving Time. 3 Press to save and exit the screen. Time Format (12-hour/ 24-hour) Auto Clock (On/Off) If set it to On , the TV will sy...
Page 45 - Setup; OSD Timout
SETUP MENUS Sutup Use the Settings sub-menus to configure the LED TV operational setup and view the current firmware version. Press on the remote control to display the setup menu screen then select Setup to display the Settings sub-menu. The following options are available: Menu Language, OSD Timeo...
Page 46 - Adjusting OSD Timeout; Closed Captions; • CC Mode
SETUP MENUS Adjusting OSD Timeout 1 Use the keys to select OSD Timeout and press. 2 Press the keys on the remote control to select 5 sec, 15 sec, 30 sec, o r 45 sec, 60 sec . 3 Press to save and exit the screen. Closed Captions Use Closed Captions to configure the settings for closed captioning in T...
Page 48 - Adjusting Closed Captions Settings; VGA Settings
SETUP MENUS Adjusting Closed Captions Settings 1 Use the keys to select Closed Captions and press . 2 Use the keys to select the desired Closed Captions option. 3 Use the keys to adjust the value. 4 Press to save and exit the screen. VGA Settings Use VGA Settings to configure the settings for closed...
Page 49 - Other Settings
SETUP MENUS Other Settings Use Other Settings to configure the settings for audio On/Off in TV programs. 1 Use the keys to select Other Settings and press . 2 Press the keys on the remote control to adjust the Audio on/off. 3 F o r A u d i o O n l y O n / O f f Restore Default 1 Use the keys to sele...
Page 50 - Lock; SELECT; to set it to; Change Password; Change Password allows you to change your current password.; Enter Old Password
SETUP MENUS Lock Press to select the source you want to lock, then press SELECT to set it to lock. If anyone want to use this source, the password is needed. Change Password Change Password allows you to change your current password. The following options are available: • Enter Old Password . • Ente...
Page 51 - System Lock
E n g lis h SETUP MENUS Changing Password 1 Use the / keys to select Change Password and press . 2 Use the Channel keys to enter the current password and press . 3 Use the Channel keys to enter the new password and press . 4 Use the Channel keys to enter the new password again for confirmation and p...
Page 52 - Input Source
SETUP MENUS Changing Input Block 1 Use the / keys to select Input Source and press. 2 Use the / keys to select Unblock/Block and press 3 Press to save and exit the screen. US Rating Rating system used at USA. – TV Rating: Use this sub-menu to customize US TV Rating programs. Ra t i ng D e sc ri p ti...
Page 53 - Use this sub-menu to select the ratings of allowable movies.; Ra ti ng; Off
E n g lis h SETUP MENUS – MPAA: Use this sub-menu to select the ratings of allowable movies. Ra ti ng D e sc ri p ti on Off G Contains nothing most parents will consider offensive for even their youngest children to see or hear; suitable for young children. PG May contain some material parents might...
Page 54 - • Canada Rating; Rating system used at Canada.
E n g lis h SETUP MENUS • Canada Rating Rating system used at Canada. – Canada English: Use this sub-menu to select the classification categories (based on Canadian ratings) of allowable TV programs and movies. 51
Page 55 - R at i ng
SETUP MENUS R at i ng De s c ri pt io n Off C Suitable for viewing by children of all ages. C8+ Not suitable for children under 8 years of age. G Suitable for general audiences. PG Parental guidance advised. 14+ Suitable for people 14 years of age or older. 18+ Suitable for people 18 years of age or...
Page 56 - CHANNEL; Channel; Signal Type; Air
SETUP MENUS CHANNEL Use the Channel sub-menus to configure the channel. Press on the remote control to display the setup menu screen then select Channel to display the Channel sub-menu. The following options are available: Signal Type, Auto Scan, Favorite, Channel List, Show/Hide, Channel Number, Ch...
Page 57 - Select Auto Scan and press; ENT
SETUP MENUS Auto Scan Select Auto Scan and press ENT . Two options are available: • Are you sure to auto Scan? • No . Auto Search automatically creates a list of receivable channels for the selected source. Favorite List The following options are available: Channel, Channel Label, Favorite, Prev, Ne...
Page 58 - You can view all the channels and choose one quickly.
SETUP MENUS Channel List The following options are available: Press change Channel, Channel Label, Prev, Next. You can view all the channels and choose one quickly. "CH-1": Label of the Channel Show/Hide The following options are available: Channel, Channel Label, Hide, Prev, Next. 55
Page 59 - Channel Number; The TV screen shows current TV channel.
SETUP MENUS Channel Number The TV screen shows current TV channel. Channel Label Rename label of the channel.. 56
Page 60 - WALL MOUNT OPTION; mm screws to wall mount the LED TV.; WALL MOUNT INSTALLATION REMINDERS; • Remove the LED TV base first before mounting the unit on a wall.; CAUTION
WALL MOUNT OPTION WALL MOUNT OPTION The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four M6 x L12 mm screws to wall mount the LED TV. WALL MOUNT INSTALLATION REMINDERS • Remove the LED TV base fir...
Page 61 - TROUBLESHOOTING; P r o b l em
E n g lis h TROUBLESHOOTING TROUBLESHOOTING P r o b l em C o r r ec ti ve Ac t io n No power • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet. You may want to plug in another electrical ...
Page 64 - SPECIFICATIONS
E n g lis h SPECIFICATIONS SPECIFICATIONS I t em Sp ec if ic a ti on Model Name UW39T7HW Active Area (Diagonal, mm) 853.92 (H) x 480.33 (V) Resolution 1,920x1,080 Contrast Ratio (min) 3000 (typ.) Response Time (min) 6.5ms (typ.) Aspect Ratio 1.77 (16:9) Panel Display color 8 bit Audio/Video Input/Ou...
Page 65 - so may cause damage to the LED TV.
E n g lis h SPECIFICATIONS I t em Sp ec if ic a ti on Dimensions (W xHxD) With stand: 895.88*570.9*154.0mm Without stand: 895.88*530.27*53.96mm Weight (Net) 8.4 Kgs Physical Specifications Weight (Gross) 10.6 Kgs NOTES: • These product specifications are subject to change without user notification. ...
