Page 2 - Table of Contents
1 Table of Contents IMPORTANT PRODUCT SAFETY INSTRUCTIONS ......................................................................................2 Antenna Installation Safety .................................................................................................................................
Page 5 - Antenna Installation Safety; Lightning; Cleaning the LCD TV; To clean the screen:
4 Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable system is grounded so as to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides in...
Page 6 - Safety Guidelines; IMPORTANT NOTICE CONCERNING POWER CORD SELECTION; For the United States and Canada; FCC Compliance Statement; Reorient or relocate the receiving antenna.
5 Safety Guidelines Warning: This device must be operated with the original power supply. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for ...
Page 7 - Installation; Your LCD TV package includes:; Important; Insert Remote Control Batteries; Remove the battery cover.
6 Installation Congratulations on your purchase of a Westinghouse 19” wide screen LCD TV. Sleek and practical, this lightweight LCD TV delivers a crisp, vibrant picture and doubles as a superb WSXGA+ computer monitor —making it a practical solution for tight spaces in the office, bedroom, or kitchen...
Page 8 - Detachable Base Stand
7 2. Attach Base Stand to LCD TV Attach the base stand to the LCD TV stand neck. Align the holes and tabs, press and snap the base stand into place. To detach the base stand, just press on the locking tabs on the bottom of the base stand and remove the base stand from the stand neck. Detachable Base...
Page 9 - Cables; Video Inputs PC Inputs; Video Inputs
8 3. Connect Antenna, Video, S-Video, YPbPr, DVI, and VGA Cables Connect video and audio cables from compatible devices to the back panel of the LCD TV. Video Inputs PC Inputs DVI S- Video Video Inputs PC Inputs Video D-Sub (VGA) YPbPr Audio-R Audio-L Antenna Audio-In Audio-Out
Page 11 - Connect Power Cable
10 4. Connect Power Cable Connect the power cord to the back of the LCD TV and then into a properly grounded AC outlet. 5. Turn Power On Press the power button on the right side of the LCD TV or on the remote control to turn on the TV. Power Button Remote Power Button
Page 12 - Programming TV Channels
11 6. Programming TV Channels 1. Select TV as the source input using the Source button on the remote control. 2. Press the Menu button to display the OSD Display Menu. 3. Use the CH ▲ / ▼ arrow keys to highlight the TV Menu. 4. Using the Vol ► arrow keys select the TV sub-menu. Use the ▼ to highligh...
Page 13 - Controls & Connections; Front View of the Product; Keypad Controls
12 Controls & Connections This section describes the keypad panel controls, and remote control in more detail. Front View of the Product Use the buttons on the right side keypad control to display and adjust the On Screen Display (OSD). The OSD controls are explained at the next page and are def...
Page 14 - Side Keypad Controls
13 Side Keypad Controls Button Mode TV Source OSD Menu 1 CH+ Channel up Navigate up 2 CH- Channel down Navigate down 3 Vol- Volume down Decrease value 4 Vol+ Volume up Increase value 5 Menu/Source Press and hold for 2 seconds to access the OSD menu. Press and release to change source. Enter/Exit Men...
Page 15 - Remote Control; CH
14 Remote Control 1. Mute Turn audio on and off. 2. MTS (Multi-channel TV Sound) Stereo, Mono and SAP sound selection 3. Power Switch the power on and off. 4. Sleep Automatically turn off the TV after a set time. 5. Display Display the channel information. 6. PIP Available in D-Sub/DVI Modes; to tur...
Page 16 - OSD Functions; TV OSD Menu; Function Name; MENU
15 OSD Functions This section describes each on-screen display (OSD) command. There are different OSD menus depending on whether you are in TV, Video (Video/S-Video/YPbPr) or PC (D-Sub/DVI) mode. All the function settings for your LCD TV are controlled either via the remote control or using the cont...
Page 18 - TV Menu; Miscellaneous Menu
17 TV Menu In the TV Menu, use the Vol ► button to select the TV sub-menu. Use the CH ▲ / ▼ buttons to highlight the function. Then use the Vol ◄ / ► arrow keys to change the values of the function in the OSD menu. Function Name Explanation Tuner System Select between STD, HRC, IRC, Air (Depending o...
Page 19 - To access the
18 Function Name Explanation Language English, Chinese, French, Spanish OSD Transparency Set OSD transparency level OSD Time-out Set the time to turn off the OSD automatically OSD Position OSD horizontal/vertical position adjustment Reset Restore factory default settings Sleep Set the Sleep timer fo...
Page 20 - Rating Menus; buttons to highlight the Movie/TV Rating to be; Video OSD Menu
19 Rating Menus Press the V-Chip button on the remote control to access the Parental Control Menu. Enter the PIN code. Use the ▼ button to highlight the Movie (MPAA) or TV (TVPG) menu. Use the ► button to select the sub-menu. Use the ▲ / ▼ buttons to highlight the Movie/TV Rating to be blocked or un...
Page 21 - PC OSD Menu; Image Menu; In the Image Menu use the Vol
20 PC OSD Menu Image Menu In the Image Menu use the Vol ► button to select image sub-menu. Use the CH ▲ / ▼ buttons to highlight function. Then use the Vol ◄ / ► arrow keys to change the values of the function in the OSD menu. Function Name Explanation Brightness Brightness adjustment. Default value...
Page 22 - Audio Menu; Color Temp Menu
21 Audio Menu In the Audio Menu use the Vol ► button to select the Audio sub-menu. Use the CH ▲ / ▼ buttons to highlight the function. Then use the Vol ◄ / ► arrow keys to change the values of the function in the OSD menu. Function Name Explanation Volume Volume adjustment Mute Turn Audio Off and On...
Page 23 - INFO Menu; PC DVI OSD Menu
22 Miscellaneous Menu In the Miscellaneous Menu, use the Vol ► button to select the “Misc” sub-menu. Use the CH ▲ / ▼ buttons to highlight the function. Then use the Vol ◄ / ► arrow keys to change the values of the function in the OSD menu. Function Name Explanation Language English, Chinese, French...
Page 24 - PIP Function Menu; button to select
23 PIP Function Menu Picture In Picture (PIP) is available in D-Sub, DVI, modes only. Use the Vol ► button to select the PIP Function sub-menu. Use either the ▲ / ▼ arrow keys to navigate within the menu. Then use the Vol ◄ / ► arrow keys to change the values of the function in the OSD menu. The Exi...
Page 25 - Input Source not found or Out of Range
24 Input Source not found or Out of Range If there is no source connected to the Input selected (TV, Video, S-Video, YPbPr, DVI, or D-Sub), the following will be displayed: If the signal source is DVI or D-Sub mode and the Display settings are not compatible with, or are out of range of the LCD TV, ...
Page 26 - Appendix; Specifications; Preliminary
25 Appendix Specifications Preliminary Product Specification Panel Size/Type 19” wide screen Color TFT LCD. Anti-static and hard coated. Native/Optimum Resolution 1440 x 900 Aspect Ratio 16:10 Viewing Angle Horizontal: 150 ° Vertical: 130 ° (typical) Display Colors 16.2 million colors Active Display...
Page 27 - Troubleshooting
26 Troubleshooting No power • Make sure AC cord is plugged into the back of the LCD TV. • Make sure AC power cord is securely connected to the AC socket. • Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Power is ON but ...
Page 28 - USER’S MANUAL
www.westinghousedigital.com USER’S MANUAL MANUEL DE L’UTILISATEURMANUAL DEL USUARIO LTV-19w6Widescreen LCD TV TV LCD à Écran GéantTV LCD Pantalla Grande Westinghouse Digital ElectronicsSanta Fe Springs, CA SE-UM-1907-0601
