Weslo WLCR96058 - Manual
Weslo WLCR96058 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – BEFORE YOU BEGIN
- Page 4 – ASSEMBLY
- Page 5 – HOW TO USE THE CARDIO GLIDE PLUS
- Page 8 – MAINTENANCE AND TROUBLE-SHOOTING
- Page 9 – CONDITIONING GUIDELINES; AGE
- Page 10 – PART LIST—Model No. WLCR96058
- Page 11 – EXPLODED DRAWING—Model No. WLCR96058
®
USER'S MANUAL
PUSH MODE
PULL MODE
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you have
questions, or find that there are
missing or damaged parts, we
will guarantee you complete
satisfaction through direct
assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained
technicians on our customer hot
line will provide immediate
assistance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.– Fri., 6 a.m.– 6 p.m. MST
CAUTION
Read all precautions and
instructions in this manual
before using this equipment.
Save this manual for future
reference.
Model No. WLCR96058
Serial No.
Write the serial number in the space
above for reference.
Serial Number Decal
Patent Pending
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
BEFORE YOU BEGIN 3 Thank you for selecting the WESLO ® CARDIO GLIDE PLUS. The CARDIO GLIDE PLUS offers a unique formof low-impact exercise that uses both the upper bodyand the lower body for increased cardiovascularbenefits and greater toning results. For a morecomplete workout, the CARDIO GLIDE PLU...
4 1. Raise the Handlebar Frame (7) to the position shown. Hold the Handle (20) and hook the Link Arms (4) ontothe lower Rollers (33) on the Handlebar Frame. Tap two Round Endcaps (8) onto the stabilizer at thefront of the Frame (6). Tap two Round Endcaps ontothe stabilizer at the rear of the Frame (...
5 5. Connect the Sensor Wire (15) to the wire on the Monitor (1). Insert all excess wire into the Frame (6). Hold the Monitor (1) with both hands, and slide it downonto the Frame (6). Refer to the inset drawing. Makesure that the side of the Monitor is between the Frameand the indicated 1/2” Dome Ca...
