Weil-McLain Series 1 - Manual
Weil-McLain Series 1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Part Number 550-100-061 1005
The replacement gasket kit (P/N: 383-500-133) includes four equal length pieces of
adhesive backed gasket material. These new gaskets will be applied to the base of the
boiler opposed to the plastic door as done previously.
Installation Instructions:
1.
Turn off service switch on boiler control panel.
2.
Remove boiler front door by removing the two knurled screws at the bottom with a flat blade screwdriver.
Once the knurled screws are removed, lift the front door off the boiler.
3.
Remove the existing gasket and adhesive from the top, bottom, and sides of the front door.
4.
Clean the edges of the boiler in the locations of the new gasket as shown in Figure 1. Isopropyl Alcohol
may be used to remove any oil or residue. Allow the surfaces time to dry before continuing to the next step.
STOP! Read before proceeding:
WARNING
Turn off gas and electricity before replacing gaskets. If boiler is hot from operation,
allow time to cool before proceeding. Failure to follow all instructions can cause
severe personal injury, death or substantial property damage.
When applying the gasket only remove plastic backing to expose the adhesive as
needed. This will make the gasket easier to handle. Minimize gaps between sections
of gaskets and trim any excess length.
Instructions:
Gasket Replacement
Ultra Series 1 & 2
Gas-fired
water boile
r
CAUTION
If boiler is hot from operation, allow time to cool before proceeding.
Failure to
perform the following can cause minor personal injury or property damage.
NOTICE
Indicates special instructions on installation, operation or maintenance that are
important but not related to personal injury or property damage.
NOTICE
Do not stretch gaskets when applying them to the boiler. Simply press the gasket
firmly into place to allow the adhesive to make contact with the boiler.
NOTICE
WARNING
These instructions must only be used by a qualified, installer/service technician.
Read completely before beginning the replacement. Failure to follow all instructions
can cause severe personal injury, death or substantial property damage.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
