Weider 15CT - Manual

5 Before beginning assembly, carefully read thefollowing information and instructions: • Assembly requires two people. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packingmaterials until assembly is completed. • Tighten all parts as you assemble them, u...

7 6. Press a 50mm Square Inner Cap (22) into theend of the Top Frame (8). Attach the Top Frame (8) to the Front Upright (6)with two M10 x 70mm Bolts (58), the 90mmSpace Support Plate (21), and two M10 NylonLocknuts (71). Attach the Top Frame (8) to the Rear Upright (7)with two M10 x 70mm Bolts (58),...

9 15. Wrap the Butterfly Cable (46) around a “V”-Pulley (39). Attach the Pulley and a Long Cable Trap(40) to the bracket on the Front Upright (6) withan M10 x 55mm Bolt (69) and an M10 NylonLocknut (71). Be sure the Cable Trap is turnedto hold the Cable in the Groove of the Pulley. 12. Locate the Bu...

13 30. Attach the Backrest (15) to the Front Upright (6) with two M6 x 65mm Bolts (65), and two M6Washers (35). 31. Press two 19mm Round Inner Caps (27) into the ends of a Pad Tube (17). Slide the Pad Tubethrough the hole in the Leg Lever (4). Slide twoFoam Pads (18) onto the ends of the Pad Tube. R...

14 33. Make sure that all parts have been properly tightened. The use of all remaining parts will be explained in ADJUSTMENTS, below. Before using the weight system, pull each cable a few times to make sure that the cables move smoothlyover the pulleys. If one of the cables does not move smoothly, f...

WEIGHT (lbs.) 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 PRESS ARM (lbs.) 12 16 20 24 28 32 36 39 43 46 50 53 57 60 64 67 71 74 78 81 85 88 92 95 99 102 105 108 111 114 117 BUTTERFLY ARM (lbs.) 8 11 14 17 20 23 26 29 32 35 38 40 42 45 47 49 ...

High Cable (45) CABLE DIAGRAMS The cable diagrams below show the proper routing of the Butterfly Cable (46), the High Cable (45), and the LowCable (47). Use the diagrams to make sure that the cables and the cable traps have been assembled correctly.If the cables have not been correctly routed, the w...

18 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS MUSCLE BUILDINGTo increase the size and strength of your muscles,push them close to their maximum capacity. Your mus-cles will continually adapt and grow as you progres-sively increase the intensity of your exercise. You canadjust the intensity...

25mm Round Inner Cap (33) 19mm Round Inner Cap (27) 50mm Square Inner Cap (22) 40mm x 50mm Inner Cap (23) 50mm x 75mm Inner Cap (29) 38mm Square Inner Cap (41) 31mm Round Inner Cap (24) "V"-Pulley (39) (Not shown to scale) 90mm Pulley (38) (Not shown to scale) PART IDENTIFICATION CHART—Model...

71 45 1 2 3 7 4 5 6 8 10 11 12 13 14 15 16 17 17 18 18 18 18 19 19 20 20 21 22 23 24 24 23 23 22 27 27 27 27 28 28 28 22 30 30 30 31 32 32 33 33 34 34 34 34 34 34 34 34 34 34 36 36 37 38 38 38 38 38 38 38 38 38 38 39 39 40 41 40 44 44 45 46 46 48 48 47 47 49 51 52 53 52 54 54 55 54 55 55 54 55 9 57 ...

To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday throughFriday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to givethe following information: • The MODEL NUMBER of the product (WESY17012) • The ...