Weed Eater 530087638 - Manual
Weed Eater 530087638 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY RULES; DANGER; OPERATOR SAFETY
- Page 4 – ASSEMBLY
- Page 6 – STOPPING YOUR ENGINE; RESTARTING A WARM ENGINE
- Page 7 – USING YOUR UNIT; OPERATING POSITION; OPERATING INSTRUCTIONS FOR
- Page 8 – REPLACING THE LINE; SERVICE; CARBURETOR ADJUSTMENT; IGNITION TIMING
E
N
G
LIS
H
F
R
A
N
Ç
A
IS
E
S
P
A
Ñ
O
L
R
Trademark
BC2400
Operator’s Manual
Manual del Operador
Manuel de L’utilisateur
DANGER:
Read and follow all Safety Rules and Operating Instructions
before using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual del operador y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en
lesiones graves.
AVERTISSEMENT:
Lire le manuel de l’utilisateur et bien
respecter tous les avertissements et toutes les instructions de
sécurité. Tout défaut de le faire pourrait entraîner des blessures
graves.
Frigidaire Home Products, Augusta, GA 30907
WCI Outdoor Products, Inc.
530087638
2/22/00
For Occasional Use Only
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SAFETY RULES DANGER : This power toolcan be danger- ous!Thisunitcancauseseriousinjuryincluding amputationorblindnesstotheoperatorandoth- ers.Thewarningsandsafetyinstructionsinthis manualmustbefollowedtoprovidereasonable safety and efficiency in using theunit. Theop- eratorisresponsibleforfollowing...
4 ASSEMBLY CARTON CONTENTS Check carton contents for the following: S brushcutter S handlebar screws (2) S blade shield screws (4) S cupped washer S large nut for installing blade S long hex wrench S short hex wrench S bracket cover S metal shield S plastic shield S shoulder strap with warning S wee...
6 S Slide the blade and retaining washer onto the shaft of the gearbox. S Now place the cupped washer onto the shaft. Make sure the cupped side of the washer is toward the blade. S Install the blade nut by threading onto the shaft counterclockwise. Shield Blade Retaining Washer Dust Cup Cupped Washe...
