Weber 61626 - Manual
Weber 61626 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DIScONNEctION OF HOSE FROM GAS SOURcE; EXPORT GRills; NORTH AMERiCAN GRills
- Page 4 – • REPLACEMENT PART INSTALLATION; MAIN GAS LINE tO MANIFOLD INStALLAtION
- Page 5 – cONNEctION OF HOSE tO GAS SOURcE
- Page 6 – cHEcK FOR GAS LEAKS
- Page 8 – WEBER-STEPHEN PRODUCTS LLC
MAIN GAS LINE
REPLACEMENT INSTRUCTIONS
61626 07/18/12
THIS PROCEDURE SHOULD ONLY BE PERFORMED BY AN AUTHORIzED
WEBER-STEPHEN PRODUCTS LLC SERVICE TECHNICIAN
WARNINg: gENUINE WEBER-STEPHEN REPLACEMENT PARTS MUST BE USED FOR ANY REPAIR OR REPLACEMENT.
YOUR ACTIONS, IF YOU FAIL TO FOLLOW THIS PRODUCT WARNINg, MAY CAUSE A FIRE, AN ExPLOSION, OR
STRUCTURAL FAILURE RESULTINg IN SERIOUS PERSONAL INjURY OR DEATH AS WELL AS DAMAgE TO PROPERTY.
(Will void all Warranty protection.)
DANgER: BEFORE PERFORMINg ANY WORk MAkE SURE THE gAS SUPPLY IS TURNED OFF AT THE SOURCE.
FAILURE TO FOLLOW DANgERS, WARNINgS AND CAUTIONS CONTAINED IN THIS INSTRUCTION SHEET MAY CAUSE A
FIRE OR AN ExPLOSION RESULTINg IN SERIOUS PERSONAL INjURY OR DEATH AS WELL AS DAMAgE TO PROPERTY.
BEFORE STARTINg: Make sure lid is closed and casters are
locked to prevent grill from moving.
note: Grills illustrated may have slight differences than model purchased.
MAIN GAS LINE
REpLAcEMENt
AT
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
WARNINg: Do not use a wrench to loosen the connection. Using a wrench could damage the regulator coupling and could cause a leak. 4 3 1 2 3 4 6 7 8 9 10 11 12 5 1 DIScONNEctION OF HOSE FROM GAS SOURcE See owner’s Guide for complete gas connection and removal instructions. EXPORT GRills LP UNITS: A...
5 6 MAIN GAS LINE tO BULKHEAD REMOVAL MAIN GAS LINE tO BULKHEAD INStALLAtION • REPLACEMENT PART INSTALLATION TOOLS NEEDED: - 3/4", 3/4" TOOLS NEEDED: - 3/4", 3/4" TOOLS NEEDED: - 3/4" 7 MAIN GAS LINE tO MANIFOLD INStALLAtION
WARNINg: Do not use a wrench to tighten connection. Using a wrench could damage regulator coupling and could cause a leak. 3 4 3 4 6 7 8 9 10 11 12 13 14 1 2 5 8 cONNEctION OF HOSE tO GAS SOURcE See owner’s Guide for complete gas connection and removal instructions. EXPORT GRills LP UNITS: A) Rein...
