Wayne WSS10 - Manual
Wayne WSS10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CALIFORNIA PROPOSITION 65; Installation
- Page 3 – Operation - Primary Pump; Figure 2
- Page 4 – Maintenance - Primary Pump; Figure 3
- Page 5 – Troubleshooting Chart - Primary Pump; Symptom
- Page 7 – Repair Parts List; Figure 4 – Primary Pump, Model WSS10
- Page 8 – Figure 5 – Primary Pump, Models WSS20 and WSS30
- Page 9 – Figure 6 – Back-up Pump, Models WSS10 and WSS20; Description
- Page 11 – Service Record; Date
- Page 12 – Operating Instructions and Parts Manual; LIMITED WARRANTY; You
- Page 13 – Instructions d'Utilisation et Manual de Pièces; © 2009 Wayne Water Systems; MÉMENTO: Gardez votre preuve datée d'achat à fin de la garantie!; S pécifications
- Page 14 – PROPOSITION 65 CALIFORNIE
- Page 16 – Entretien - Pompe Principale
- Page 17 – Entretien - Pompe de Secours
- Page 18 – Guide De Dépannage - Pompe Principale; Guide De Dépannage - Pompe de Secours; Symptôme
- Page 19 – Figure 4 – Pompe Principale, Modèle WSS10; Liste de Pièces Détachées
- Page 20 – Figure 5 – Pompe Principale, Modèles WSS20 et WSS30
- Page 21 – Figure 6 – Pompe de Secours, Modèles WSS10 and WSS20
- Page 22 – Figure 7 – Pompe de Secours, Modèle WSS30
- Page 23 – Enregistrement d’entretien
- Page 24 – GARANTIE LIMITÉE; DEVEZ
- Page 25 – Manual de Instrucciones de Operación y Piezas; D escripción; Adjúntela a este manual o archívela en lugar seguro.; Especificaciones
- Page 26 – Medidas de Seguridad; PROPOSICIÓN DE CALIFORNIA 65; Instalación; Figure 1a
- Page 27 – Figura 2
- Page 29 – Figura 3
- Page 30 – Guía de diagnóstico de averías - Bomba Primaria; Guía de diagnóstico de averías - Bomba de Respaldo; Síntoma
- Page 31 – Figura 4 – Bomba Primaria, Modelo WSS10; Lista de Partes de Reparación
- Page 32 – Figura 5 – Bomba Primaria, Modelos WSS20 y WSS30
- Page 33 – Figura 6 – Bomba de Respaldo, Modelos WSS10 y WSS20
- Page 34 – Figura 7 – Bomba de Respaldo, Modelo WSS30
- Page 35 – Registro de Servicios; Fecha
- Page 36 – GARANTÍA LIMITADA; DEBE; reclamo de sus derechos bajo esta garantía, Ud.; DEBERA; enviar una; COPIA; del recibo de la tienda junto con el producto; NO ENVIE ESTOS DATOS A WAYNE WATER SYSTEMS.; Conserve esto sólo como datos.; GRAPE SU RECIBO DE COMPRA AQUÍ
© 2009 Wayne Water Systems
353501-001 2/09
Submersible Sump
System
Operating Instructions and Parts Manual
WSS10, WSS20, WSS30
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
This submersible sump system is
designed for indoor home sump
applications. The system consists of
a primary sump pump and a back-up
sump pump.
The primary system operates on
120-volt household electric power. It
is equipped with a 3-prong grounding
type power cord. The motor is oil filled
and sealed for cooler running and is
designed to operate under water. The
primary pump is provided with Switch
Genius™ Technology to control the
pump. When water is detected, the
pump will start automatically.
The battery operated back-up sump
pump is included in the event that
the primary pump cannot function. It
does not replace the primary pump.
A float switch automatically turns on
the backup sump pump when water
activates the float. A battery (not
included) must be installed to operate
the back-up sump pump.
Model WSS10 consists of a WSCAP30
primary pump and an ESP15 backup
pump. Model WSS20 consists of a
CDUCAP725 primary pump and an
ESP15 backup pump.
Model WSS30
consists of a CDUCAP850 primary pump
and an ESP25 backup pump
.
Unpacking
Inspect this unit before it is used.
Occasionally, products are damaged
during shipment. If the pump or
components are damaged, return
the unit to the place of purchase for
replacement. Failure to do so could
result in serious injury or death.
For parts, product & service information
visit
www.waynepumps.com
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
Specifications
WSS10
WSS20
WSS30
Power supply
requirements
120V, 60 hz
▲
12V DC
●
120V, 60 hz
▲
12V DC
●
120V, 60 hz
▲
12V DC
●
Motor
Single phase, oil
filled
▲
Single phase, oil
filled
▲
Single phase, oil
filled
▲
Liquid temperature
range
40°F to 120°F
40°F to 120°F
40°F to 120°F
Circuit requirements
15 amps (min)
▲
15 amps (min)
▲
15 amps (min)
▲
Dimensions
11 inches high x
9 inches base
11-1/2 inches high x
9-3/4 inches base
11-1/2 inches high x
12 inches base
Cut-in level
(factory set)
8 inches
8 inches
8 inches
Cut-out level
(factory set)
Approx. 3 inches
Approx. 3 inches
Approx. 3 inches
Construction
WSS10
WSS20
WSS30
Motor
housing
Glass reinforced
thermoplastic
▲ ●
Cold rolled steel
▲
Glass reinforced
thermoplastic
●
Cold rolled Steel
▲
Glass reinforced
thermoplastic
●
Volute
Thermoplastic
▲ ●
Cast iron
▲
Glass reinforced
thermoplastic
●
Cast iron
▲
Glass reinforced
thermoplastic
●
Impeller
Glass reinforced
thermoplastic
Glass reinforced
thermoplastic
Glass reinforced
thermoplastic
Shaft
Stainless steel
Low carbon steel
Low carbon steel
Seals
Buna N
Buna N
Buna N
Discharge
1-1/2 inch NPT
▲
1-1/4 inch or
1-1/2 inch socket
●
1-1/2 inch NPT
▲
1-1/4 inch or
1-1/2 inch socket
●
1-1/2 inch NPT
▲
1-1/2 inch socket
●
▲
Primary pump
●
Back-up pump
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Operating Instructions and Parts Manual Safety Guidelines This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols. Danger indicates a...
3 WSS10, WSS20, WSS30 www.waynepumps.com If cables are reversed, damage to the control box or battery could result and will void the warranty. 5. Place battery box within six feet of the sump and a 115 VAC separately fused outlet. The outlet must be protected by a ground fault circuit interrupter (G...
4 Operating Instructions and Parts Manual 6. The motor is equipped with an automatic reset thermal protector. 7. While the pump is draining the pit, verify that the discharge piping is carrying the water to a point several feet away from the foundation. 8. If pump discharge line is exposed to freezi...
