Wayne Dalton 8124 - Manual
Wayne Dalton 8124 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WIND LOAD POST; INSTALLATION INSTRUCTIONS; FIGURE 2
- Page 3 – FIGURE 4
- Page 4 – SECURING POSTS FOR STORAGE; FIGURE 5
Wayne-Dalton Corp.
P.O. Box 67 Mt. Hope, OH 44660
(888) 827-3667
www.wayne-dalton.com
WINDLOAD POST
MODEL 8000/ 8100/8024/8124
INSTALLATION INSTRUCTIONS
Copyright 2007 Wayne-Dalton Corp.
Rev 1
11/28/2007
312957
See garage door owner’s manual for warranty information.
IMPORTANT NOTICE!
READ THE ENCLOSED INSTRUCTIONS CAREFULLY BEFORE INSTALLING THIS WIND LOAD POST. PAY
CLOSE ATTENTION TO ALL WARNING LABELS AND NOTES. THIS MANUAL SHOULD BE ATTACHED
TO THE WALL IN CLOSE PROXIMITY TO THE WIND LOAD POST.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-2- WIND LOAD POST INSTALLATION INSTRUCTIONS Step 1: Attach the header lock bracket to the header using the (4) 5/16” x 1-5/8” lag screws provided as shown in fi gure 1. The header lock bracket should be in line with the intermediate hinges where the post is to be installed and located such that the ...
-3- WIND LOAD POST INSTALLATION INSTRUCTIONS Step 6: Place the post assembly into position by lowering the top plate extension into the notch in the header lock bracket until the top plate extension seats in the bottom of the notch. Allowing the outer post to slide down the inner post, insert the 1/...
-4- WIND LOAD POST INSTALLATION INSTRUCTIONS SECURING POSTS FOR STORAGE Step 1 : Locate a convenient location as close to the door as possible and mount a header lock bracket to the wall such that the distance be-tween the bottom of the header lock bracket and the fl oor is 4” greater than the distan...
