Wayne Dalton 7100 Series - Manual
Wayne Dalton 7100 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PartS Breakdown
- Page 3 – Important Safety Instructions; WARNING; Tools Required
- Page 4 – Door Section Identification; Graduated End Hinge And
- Page 5 – Removing an Existing Door; A POWERFuL SPRING RELEASING ITS ENERGy SuDDENLy CAN CAuSE SEvERE; Preparing the Opening
- Page 6 – InStallatIon; Fully Adjustable Flag Angles; Fully Adjustable Jamb Brackets; FAILuRE TO ENSuRE TIGHT FIT OF CABLE LOOP OvER COTTER PIN COuLD
- Page 7 – Track Roller Carriers; Strutting
- Page 8 – Top Fixtures
- Page 9 – Stacking Sections
- Page 10 – Top Section; Horizontal Tracks; DO NOT RAISE DOOR uNTIL HORIzONTAL TRACkS ARE SECuRED AT REAR,
- Page 11 – Adjusting Top Fixtures; End Bearing Brackets; Center Bracket
- Page 12 – Torsion Spring Assembly
- Page 13 – Torsion Spring Attachment; Counterbalance Lift Cables
- Page 14 – Winding Springs; Rear Back Hangs
- Page 15 – Label Placement
- Page 17 – Door Arm Hookup; Lift Handles; Pull Down Rope; DO NOT INSTALL PuLL DOWN ROPE ON DOORS WITH OPERATORS. CHILDREN; optional Installation
- Page 18 – Maintenance
- Page 20 – Limited warranty; uNDERSCORED BOLD FACE; warranty
- Page 22 – Please Do Not Return This Product To The Store; thank you for your purchase.; Find a Dealer; section online at
GARAGE DOORS & OPENERS
Part No.
IMPORTANT NOTICES!
Wayne-Dalton highly recommends that you read and fully under-
stand the Installation Instructions and Owner’s Manual before you
attempt this installation.
To avoid possible injury, read the enclosed instructions carefully
before installing and operating the garage door. Pay close attention
to all warnings and notes. After installation is complete, fasten this
manual near garage door for easy reference.
The complete Installation Instructions and Owner’s Manual are
available at no charge from:
Wayne-Dalton, a Division Of Overhead Door Corporation,
P.O. Box 67, Mt. Hope, OH., 44660,
Or Online At
www.Wayne-Dalton.com
S
tandard
L
ift
MH
inStaLLation
inStructionS
and
owner
’
S
ManuaL
t
o r S i o n
7100 Series
T a b l e O f C o n t e n t s
345639
REV1 03/08/2012
©Copyright 2012 Wayne-Dalton, a Division Of Overhead Door Corporation
Parts Breakdown
2
Pre-Installation
3
Important Safety Instructions
3
Tools Required
3
Package Contents
3
Door Section Identification
4
Graduated End Hinge And Strut Identification
4
Removing an Existing Door
5
Preparing the Opening
5
Installation
6
Optional Installation
17
Door Arm Hookup
17
Lift Handles
17
Pull Down Rope
17
Maintenance
18
Cleaning Your Garage Door
18
Painting Your Garage Door
18
Clear Or Stained Finishes
18
Operation and Maintenance
18
Warranty
20
Dealer Locator Information
22
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com A. TRACk ROLLERS (AS REquIRED): A1. Short Stem Track ...
Important Safety Instructions DEFINITION OF kEy WORDS uSED IN THIS MANuAL: WARNING WARNING INDICATES A POTENTIALLy HAzARDOuS SITuATION WHICH; IF NOT AvOIDED, COuLD RESuLT IN SEvERE OR FATAL INJuRy. CAuTION: PROPERTY DAMAGE OR INJURY CAN RESULT FROM FAILURE TO FOLLOW INSTRUCTIONS. IMPORTANT: REqUIRED...
Cable drums RH/LH Torsion springs RH/LH Center bracket (as required) Center bracket bushing (as required) (2) End bearing brackets (as required) Track roller carriers (as required) End bearing brackets RH/LH (as required) Keys (as required) Hinges (as required) Bottom weather seal / 3/4” nails (as r...
