Wayne Dalton 260600 - Manual
Wayne Dalton 260600 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 1: Installing the ECR Lock; CAUTION; DO NOT DRILL LOCK SEC-; place the lock section
- Page 3 – position
- Page 4 – Step 4: Installing the Secure Lock; locate the
Required Tools
Wayne-Dalton Corp.
P.O. Box 67 Mt. Hope, OH 44660
www.wayne-dalton.com
All Residential Door Models: 8000/9000 Series & Wood Doors
Keyed-in-Handle Secure ECR Lock
Installation Instructions
and Owner’s Manual
Models: 260597, 260600
© Copyright 2007 Wayne-Dalton Corp.
Rev1 07/05/2007
Important Notice!
REFER TO THE DOOR MODEL INSTALLATION INSTRUCTIONS MANUAL FOR
Part No: 307896
(1) Electric Drill
(1) 1/8” Drill Bit
(1) 3/4” Dia. Hole Saw
(1) 7/16” 6 Point Nut Driver
(1) 7/16” Wrench Or Socket
(1) Pliers/Wire Cutter
(1) Phillips Screw Driver
(1) Standard Screw Driver
(1) Center Punch
UNIVERSAL
LOCK STILE
(9200/9600 & 9900)
#261964
(6) 1/4” -20
FLANGED HEX NUTS
#100279
(6) 1/4-20 X 9/16”
TRACK BOLTS
#200527
PHILLIPS HEAD MACHINE SCREWS
(2) 1” (9200) #306564
(2) 1-1/4” (9600/8300 & WOOD)#306565
(2) 1-1/2” (9900) #306566
(2) 1-3/4” (8000/PR9000/8500) #306567
OUTSIDE
HANDLE
#255543
(2) SECURE LOCK BASE II
#245957
(2)STRIKER
PLATES #130025
INSIDE DOOR HANDLE
#307893
(2) FOAM TAPE
(9200/9600/9900)
3/4” X 2-1/2”
#306653
(6) 1/4-20 X 11/16”
SELF DRILLING
SCREWS #300723
(2) #8 - 32 X 3/4”
PHILLIPS HEAD SELF TAPPING
SCREWS #100278
LOCK CABLE
#307894
LOCK BACKUP PLATE
(8300/8500 & WOOD)
#128564
OR
1/4-14 X 1”
LAG SCREWS
(WOOD DOORS
ONLY) #107584
LEFT LOCK BAR
#150987
RIGHT LOCK BAR
#130024
(2) RETURN SPRING
#130023
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
22 Step 1: Installing the ECR Lock CAUTION DO NOT DRILL LOCK SEC- TION OR INSTALL LOCK ON DOORS WITH OPENERS. THE DOOR AND/ OR OPENER MAY BE DAMAGED IF THE OPENER IS USED WHILE THE DOOR IS LOCKED. NOTE: Common practice for doors with the odd number of raised panels is to mount the lock towards the r...
3 Step 2: Outside Lock Handle Assembly 8000/PR9000 & PR9050 Series doors (see Fig. 4), align the outside handle assembly with the handle point-ing towards the fl oor and insert the assembly through the previously drilled 3/4” diameter holes in the section. Secure the outside lock handle to the s...
Step 4: Installing the Secure Lock 8000/9000 Series & Wood doors (Fig.1-3), locate the inside handle and uncoil the lock cable, then thread the cable through the inside handle as illustrated ( see Fig.1 ). Locate the secure lock striker plates over the pre-punched holes in the vertical track nea...
