VXI USB100 - Manual
VXI USB100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
TalkPro
Max / Max-2
VXI Corporation
One Front Street
Rollinsford, NH 03869
www.vxicorp.com
800-742-8588
603-742-2888
Technical Specifications
Talk
Pro
TM
The Power of Voice.
TalkPro USB
100/200
TalkPro
TalkPro XPress
TalkPro XPress
TALKPRO / TALKPRO XPRESS
MICROPHONE SPECIFICATIONS
Microphone: Gentex noise canceling
Ambient noise suppression: 13dB @ 1 kHz, typical
Output impedance: 1.8 kOhms typical
Sensitivity: -54dB @ 1kHz (defined 1" from talk-side, 82dB SPL)
Signal to noise ratio: More than 50dB
Frequency response: 100Hz to 6.3 kHz
Operating current: 300uA max
Operating voltage: 1.0 V DC min. to 20 V DC max.
RECEIVE SPECIFICATIONS
Speaker: Dynamic, 36mm diameter
SPL: 90dB @ 1 kHz, 0.22 V input
Impedance: 32 Ohms
Frequency response: 100 Hz to 6.3 kHz
Rated input power: 10 mW continuous, 100 m W peak
MECHANICAL SPECIFICATIONS
Cables: Stranded wire, spiral shield, polyethelene insulation, PVC jacket
Connection: MIC: 3.5mm stereo plug with tip and ring wired independently.
SPEAKER:3.5mm stereo plug with tip and sleeve wired to speaker; ring open
Microphone Boom: Flexible gooseneck / Swivels 270 degrees for left or right ear placement
Headband: Stainless steel adjustable band; Ratchet positioning
Weight (without cord): 1.5 oz
Cord: Single cord terminates with 3.5mm plugs. No quick disconnect.
Cord Length: TalkPro 10' 8" / TalkPro XPress 10' 4"
TALKPRO MAX / MAX-2 / USB100 / USB200
MICROPHONE SPECIFICATIONS
Microphone: Gentex noise canceling
Ambient noise suppression: 13dB @ 1 kHz, typical
Output impedance: 1.8 kOhms typical
Sensitivity: -54dB @ 1kHz (defined 1" from talk-side, 82dB SPL)
Signal to noise ratio: More than 50dB
Frequency response: 100Hz to 6.3 kHz
Operating current: 300uA max
Operating voltage: 1.0 V DC min. to 20 V DC max.
RECEIVE SPECIFICATIONS
Speaker: Dynamic, 36mm diameter
SPL: 99 + 3dB (MEAN VALUE @ 0.8, 1.0, 1.2, 1.5 KHz)
Impedance: 300 Ohms
Frequency Response: 190 To 5.2 KHz
Rated Input Power: 40 mW continuous, 100 mW maximum
MECHANICAL SPECIFICATIONS
Cables: Stranded wire, PVC Insulation, polyurethane jacket
TalkPro Max Connection: Mic- 3.5mm stereo plug with tip and ring wired independently
Speaker- 3.5mm stereo plug with tip and sleeve wired to speaker; ring open
Inline pendant: plastic with mod plug connection for lower cord.
TalkPro USB Connection: USB sample rates down sampled by host: 8, 11.025, 22.05, 44.1 kHz,
normal USB sample rate 48kHz
Microphone Boom: Flexible gooseneck / Swivels 270 degrees for left or right ear placement
Headband: Stainless steel adjustable band; Ratchet positioning
Weight (without cord): Monaural - 1.5 oz / Binaural - 2 oz
Cord: Upper and lower cords connected via quick disconnect style pendant
Cord Length: TalkPro Max 10' 2" / TalkPro USB 10' 7"
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
