VXI TuffSet 15 - Manual

VXI TuffSet 15

VXI TuffSet 15 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
Page: / 1
Loading the manual

VXI Corporation

One Front Street

Rollinsford, NH 03869

www.vxicorp.com

800-742-8588

603-742-2888

Headset Technical Specifications

TUFFSET 37 CONVERTIBLE

TRANSMIT SPECIFICATIONS

Microphone: Noise canceling electret
Impedance: Low. (~300 Ohm)
Sensitivity: -36 dB / Pa. (=16mV)
DC current: 0.5 mAA. (At 3V./2.2 k.Ohm)

RECEIVE SPECIFICATIONS

Impedance: 300 Ohm
Sound Pressure: 96 dB (At 1 k.Hz./ 1mW)
Frequency response: 300 Hz. To 3400 Hz.
Sound Pressure Peak Max: 112 dB (Limited by built-in protective circuit)

MECHANICAL SPECIFICATIONS

Cables:Thin, high flexible and ultra high strength
4 conductor cable.
Connectors: 4 Pin Quick Disconnect
Flexible microphone boom.

TuffSet 37
Convertible

TUFFSET 10 / TUFFSET 20

TRANSMIT SPECIFICATIONS

Microphone: Noise canceling electret
Sensitivity: -50dB @ 1kHz (defined 1" from talk-
side, 82dB SPL)
Current consumption: 300uA max
Operating Voltage: DC 1.0V min. to 20V max.

RECEIVE SPECIFICATIONS

Speaker: Dynamic; 36mm diameter
SPL: 90db @ 1kHz, 0.55V input
Impedance: 300 Ohms
Frequency response: 200Hz to 5 kHz
Rated input: 10mW continuous, 100mW peak

MECHANICAL SPECIFICATIONS

Cables: Standard wire, PVC insulation, polyurethane jacket
Connectors: 4 Pin Quick Disconnect
Mic boom: Flexible, with positioning memory; swivels 270°
Mounting: Left or right ear placement
Headband: Stainless steel, adjustable; ratchet positioning
Operating Current: 300uA max.
Operating Voltage: DC 1.0V min. to 20V max.

TuffSet 10

TuffSet 20

TUFFSET 15 / TUFFSET 25 NOISE ATTENUATING

TRANSMIT SPECIFICATIONS

Microphone - electret noise canceling
Frequency response - 200~10KHz
Impedance: 1.8 k
Sensitivity: -87dB+5dB AT 1KHz 1.5v
Current consumption - 400 Microamp/Max
Operating voltage: 3.0 V
Test voltage - 1.5 volts

RECEIVE SPECIFICATIONS

Type - Magnetic type unit
Voice Coil Impedance - 300ohms
Sound Pressure Level - 100dB+/-4dB c1kHz
Impedance (Monaural): 150 Ohms +20% at 1kHz
Impedance (Binaural): 75 Ohms +20% at 1kHz
Frequency response: 100 Hz to 6.3 kHz
Rated Power: 50m

MECHANICAL SPECIFICATIONS

Cables: polyurethane jacket, PVC resin
Connectors: 4-pin quick disconnect
Microphone boom: Highly flexible gooseneck boom
Headband - Covered stainless steel, adjustable
Ear cushion - PVC leather
Weight - (without lower cord) TuffSet 15: 7.2oz TuffSet 25:11 oz

TuffSet 25

TuffSet 15

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other VXI Models

All VXI Other