VXI BlueParrott B10 - Manual

7 MAXIMIZING RANGE The range of communication distance between the headset and another Bluetoothdevice varies as follows. If the headset is being used with a Bluetooth cellular phone,PDA or computer, the range is typically the same as the Bluetooth standard of 33feet. However, some of these Bluetoot...

8 CHARGING THE HEADSET Before first time operation, the headset must be charged for4-8 hours*. The headset can be charged with a VXIBlueParrott B50 charger (see photo at left) or by beingplaced in the base unit of a VXI BlueParrott wireless headsetsystem (see photo at right). For additional instruct...

10 HEADSET ADJUSTMENTS / MICROPHONE POSITIONING See page 5 for product features. Headset Adjustment 1. Place the headset on your head with the ear cushion on your left or right ear. 2. Swivel microphone boom up and over, if necessary, to bring it to the chosen side.3. Place T-bar on the side of your...

11 BASIC OPERATIONS See page 5 for location of button controls. Standby Mode / Talk Time The headset is automatically in Standby Mode when you remove it from the charger,therefore, a single press of the multifunction button will put the headset into TalkTime mode (you will hear a single beep). When ...

12 PAIRING See page 5 for location of button controls. You must pair the headset with your Bluetooth device before first use. Before Pairing: Turn the Headset Off If the yellow light on the headset is flashing (you may need to wait 5 seconds to seeit), then you must turn the headset off before pairi...

13 You will hear two series of melodic tones (hold it up to your ear). The yellow and red indicator lights on the headset will flash alternately. Release the multifunction button.This puts the headset in pairing mode.4. Refer to your other Bluetooth device’s user manual for instructions on how to pa...

14 HEADSET VOLUME AND MUTE CONTROLS see Product Features page 5 Adjust Speaker Volume To adjust the volume in your earpiece, press the increase or decrease volume buttonfor 1 second, then release. Repeat until volume is at desired level. You will hear a sin-gle beep each time you press the button. Y...

16 USING THE HEADSET WITH OTHER BLUETOOTH DEVICES Before use, make sure the headset is on (page 11). To use the headset with a VXI BlueParrott base, consult the user guide that camewith the base. For use with Bluetooth cell phones, see page 14. For all other non-VXIproducts, please read below. 1. Pu...

17 VISUAL AND AUDIO INDICATORS EXPLAINED Headset Indicator Lights / While In Charger: Multifunction button not lit Headset not receiving charge Green light Fully charged/Okay to use Red light Partially charged/okay to use Headset Indicator Lights / While Off Charger: Yellow flashing slowly, every 4-...

18 FAQS / TROUBLESHOOTING Why don't I hear a dial tone (phone or VoIP applications)? 1. Make sure the headset is turned on (page 11). 2. Were the Bluetooth units paired together before first use (page 12)? 3. Be sure that the headset connection has been activated on the other Bluetooth device.* How ...

21 VXI LIMITED WARRANTY 1. VXI warrants that your VXI BlueParrott headset will be free from defects in material and work- manship for two years from the date of purchase. If, during the first two years from the date of purchase, your VXI BlueParrott headset fails to work due to a defect in material ...