Vulcan 1GR85DF ML-136790 - Manual

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -5- INSTALLATION Do not use the door or its handle to lift the fryer. Before installing the fryer, verify that the type of gas (natural or propane) agrees with the specifications on the fryer data plate, which is located on the insi...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -6- CODES AND STANDARDS The fryer must be installed in accordance with: In the United States: Š State and local codes, or in the absence of local codes, with: Š National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (latest edition). Copies m...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -7- FLUE CONNECTION Make the flue connection as follows: Š Comply with Vapor Removal from Cooking Equipment , ANSI-NFPA Standard #96 (latest edition), available from the National Fire Protection Association, Batterymarch Park, Quinc...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -9- Š In Australia, use only the caster supplied by the manufacturer for the fryer device. The fryer must be installed using a hose assembly restraining device to limit the movement of the appliance in accordance with AS1869. Š The ...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -10- BEFORE FIRST USE Cleaning New units are wiped down at the factory to remove any visible signs of dirt, oil, grease, etc. remaining from the manufacturing process. Before any food preparation, thoroughly wash the protective oil ...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -11- BASIC FRYING INSTRUCTION Š Set the desired temperature and allow shortening to heat up to that temperature. Š Fry items that are the same size to ensure equal doneness. Š Drain or wipe dry raw or wet foods to minimize splatter ...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -12- TURNING ON THE FRYER Š Open the door to the fryer. Turn the power switch to the on position. Š Set temperature by turning the knob to the desired temperatures. The burners will light automatically. Š The burners will cycle on a...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -13- Programming the Solid State Control

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -14- Programming the Computer Control

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -15- DRAINING THE TANK 1. Turn off fryer. 2. Insert the drain extension into the drain valve. Tighten only hand tight. 3. Direct the drain spout into the container that you want to drain the shortening into. 4. Open the drain valve....

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -16- 7. Press the TEMP button again and the gas burners will heat the solution. Bring the solution to a simmer only. Allow to stand for a few minutes. 8. Turn OFF the power to the fryer. Drain the tank according to DRAINING THE TANK...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -17- KleenScreen Plus ® Filtration System Installation and Operational Manual for “DF” and “CF” Models GRD/CF and 2XGD/CF Models 2GR45DF Shown 2XG45DF Shown GAS KleenScreen PLUS® Models: 1GR45DF ML-136778 1GR45CF ML-136791 1GR65DF M...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -18- Filtering Instructions for KleenScreen PLUS ® Fryers General The KleenScreen PLUS ® filtration system filters the oil as it is pumped back into its’ respective tank(s). Only one tank can be drained and filtered at a time. Under...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -19- Fully assembled filter screen assembly: Fig. 2 Secure Tube with Suction Tube Clip Filter Screen Lays Flat On Bottom of Filter Pan Fig. 3 Micro-Filtration Fabric Envelope Assembly: Same Suction Tube Fabric Envelope Insert (Diffe...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -20- INSTRUCTIONS TO REMOVE & REPLACE KLEENSCREEN PLUS ® FILTER ENVELOPE FOR ABSOLUTE FILTRATION & MAXIMUM FLOW RATE WE RECOMMEND YOU CHANGE YOUR FILTER ENVELOPES AT EVERY OIL CHANGE (10-14 DAYS DEPENDING ON OIL USAGE). Step...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -21- Operation Hot oil and parts can cause burns. Use care when operating, cleaning and servicing the fryer. Spilling hot frying compound can cause severe burns. Do not move fryer without draining all frying compound from the tank. ...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -22- Filtering Instructions for KleenScreen PLUS ® Fryers with Solid State Controls

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -23- Filtering Instructions for KleenScreen PLUS ® Fryers with Computer Controls

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -24- FILTERING TIP: Open the filtering drawer approximately 1” to allow any oil in the return line to run back into the filter pan. This will take about 30 seconds to complete. Then open the drawer completely to clean filter compone...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -25- BOIL OUT PROCEDURE: Use the Boil Out By-Pass™ drain extension allowing the boil out solution to exit the fry tank without using the filtering system. Do not allow water to run through the motor / pump. Drain the boil out soluti...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -26- MAINTENANCE Hot oil and hot parts can cause burns. Use care when operating, cleaning, and servicing the fryer. Spilling hot fryer compound can cause severe burns. Do not move fryer without draining all frying compound from the ...

GRDF / GRCF SERIES GAS FRYERS VULCAN-HART F-32933 Rev. G (May 2009) -27- OPEN PROBE – If an open probe is detected, the heat demand is disabled and any running cooking cycles are cancelled. All operator buttons are disabled. The digital control displays the following message: “D” Solid State – OPEN ...