VTech VT181CHE-IR - Manual - manualsarea.com

Page 2 - Table Of Contents

Table Of Contents Section Page Section Page Section 1 Section 4 Introduction Touch screen 1.1 VT181CH Display Family 1 4.1 Touch Screen Introduction 10 1.2 Product Safety Precautions 2 Section 5 Section 2 Troubleshooting Tips 11 Display Setup 2.1 Display Features 3 Section 6 2.2 Unpacking The Displa...

Page 3 - INTRODUCTION; VT181CH Display Family

VT181CH / VT181CHE User Guide 150-066 INTRODUCTION INTRODUCTION 1 Section VT181CH Display Family The VT181CH, VT181CH-IR, and VT181CHE-IR are part of a series of LCD replacement displays for the Honeywell TDC Universal Stations (US) Classic Style furniture. The VT181CH displays are offered as chassi...

Page 4 - Product Safety Precautions; Do not expose the display to excessive heat.

Product Safety Precautions ⇒ Ensure that sufficient space is available around the display to provide the circulation necessary for cooling. ⇒ Ensure that the ambient air temperature will not exceed the specified maximum temperature. ⇒ Do not attempt to service this display yourself. The rear chassis...

Page 5 - DISPLAY SETUP; VT181CH Series Display Features; The Display is supplied with an Anti-Reflective Screen.

VT181CH / VT181CHE User Guide 150-066 Section 2 DISPLAY SETUP DISPLAY SETUP VT181CH Series Display Features ⇒ Capable of displaying unlimited colors in a continuous spectrum. The high contrast LCD enhances the image with no geometric distortion. ⇒ The Displays come with a HD15 Input Connector. The V...

Page 6 - Video adapter cable (HD15 to DB9 or HD15 to 5BNC); Unpacking and setting up your display; Signal Connections

1. Connect all cables to the station first. This would include the video adapter cable and the optional IR touch screen cable. 2. After connecting the cables between the LCD monitor and the station, plug the power cord into the display. 3. Switch on the display power switch. 4. Reboot the station. 5...

Page 7 - term end of the female connector.; Signal Connections Cont.

VT181CH / VT181CHE User Guide 150-066 Use the HD15 to DB9 video adapter cable to connect the flat panel display to the EPDG I/O adapter board. Use the HD15 to 5BNC video adapter cable to connect the flat panel display to the original Red, Green, and Blue coax cable connected to the PDG I/O adapter b...

Page 8 - Adjusting the display; On Screen Display

6 GETTING STARTED GETTING STARTED 3 Section 3.1 Adjusting the display On Screen Display Button Description Invokes OSD or Next Function Level Increase Contrast or Increment Selected Parameter Decrease Contrast or Decrement Selected Parameter Increase Backlight Brightness or Increment Selected Parame...

Page 9 - Direct Brightness Adjustment; Direct Contrast Adjustment; OSD Menu; Brightness and Contrast

VT181CH / VT181CHE User Guide 150-066 7 3.3 Direct Brightness Adjustment OSD Agent Description Brightness Controls the intensity of the backlight. After adjustment, the new Brightness value is displayed on the screen until the OSD timeout period expires. The new setting is then stored and the displa...

Page 10 - The Geometry Menu; Configures the preferred input selections.; The Color Menu; Adjustment Procedure Cont.

The Geometry Menu OSD Agent Description Edge Adjustment Adjusts Picture Size and Position Controls. The four “Edge” controls shift each edge within available limits. Note that the maximum available shift depends on the incoming video standard and the display panel type, and may be restricted vertica...

Page 11 - than to picture adjustment.; OSD Agent

VT181CH / VT181CHE User Guide 150-066 9 3.3 Adjustment Procedure Cont. The System Menu: Contains functions which are more applicable to system operation than to picture adjustment. OSD Agent Description Esc Returns to the last saved setup. It is useful if an adjustment has been made in error. Save S...

Page 13 - TROUBLESHOOTING; Problem; No image on display screen; Troubleshooting Tips

VT181CH / VT181CHE User Guide 150-066 11 TROUBLESHOOTING TROUBLESHOOTING 5 Section Problem Troubleshooting Tip No image on display screen 1. Check that the power cord of the station has been connected to the display. 2. Check that the power switch of the Display has been turned to the on position. 3...

Page 14 - Cleaning

CLEANING AND MAINTANENCE CLEANING AND MAINTANENCE Cleaning Occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid scratching it with accumulated grit....

Page 15 - MOUNTING INSTRUCTIONS; Mechanical Drawings; Model; Tray Mount; Mounting Procedure - Flush Mount

VT181CH / VT181CHE User Guide 150-066 1. Remove the original CRT display monitor. Keep the two "L" shaped brackets. These brackets will be used to mount the flat display. Included with the display are a set of brackets for both upper and lower tier mounting. 2. Remove the original front cons...

Page 16 - ENGINEERING SPECIFICATIONS

18 SPECIFICATIONS SPECIFICATIONS 8 Section ENGINEERING SPECIFICATIONS Panel Size 18.1” Type TFT Bright Active matrix AR / AG Protective Faceplate Resolution Capabilities PDG and EPDG Pixel Pitch 0.2805mm Active Display Area 14.315” x 11.308/” 359.04mm x 287.23mm Viewing Angle (Left/Right) 80/80º Vie...

Page 17 - VARTECH SYSTEMS; HEADQUARTERS

VT181CH / VT181CHE User Guide 150-066 150-066-002 4.16.04 VARTECH SYSTEMS HEADQUARTERS 11529 Sunbelt Ct. Baton Rouge, Louisiana 70809 Toll-Free: 800.223.8050 International Phone: 001.225.298.0300 Fax: 225.297.2440 E-mail: [email protected] www.vartechsystems.com

VTech VT181CHE-IR - Manual

Table of Contents:

Summary

Other VTech Models