VTech VM310-13 - Manual

User’s manual

VM310/VM310-13
Accessory baby unit

for use with VTech model

VM311/VM311-13/VM311-2/

VM311-23

Congratulations

on purchasing your new VTech product.
Before using this product, please read

Important safety instructions

.

This manual has instructions on how to set
up and pair your new baby unit. For complete
instructions on using the baby unit, see the
user’s manual that came with your video and
audio monitor.

For support, shopping, and everything new at
VTech, visit our website at

www.vtechphones.com

.

Register online to get an additional

3-month warranty!
Visit www.vtechphones.com.

Registration

Register your product online for
enhanced warranty support.

Product news

Learn about the latest VTech
products.

When using your equipment, basic safety

precautions should always be followed to reduce the

risk of fire, electric shock and injury, including the

following:

Follow all warnings and instructions marked on

the product.
Adult setup is required.
This product is intended as an aid. It is not

a substitute for responsible and proper adult

supervision and should not be used as such.
This product is not intended for use as a medical

monitor.

1.

2.
3.

4.

Do not use this product near water. For example, do

not use it next to a bath tub, wash bowl, kitchen sink,

laundry tub or swimming pool, or in a wet basement

or shower.

Use only the adapter included with this product.

Incorrect adapter polarity or voltage can seriously

damage the product.

Baby unit power adapter: I

nput 100-240V AC

150mA 50/60Hz; Output: 6V DC 600mA.

The power adapter are intended to be correctly

oriented in a vertical or floor mount position. The

prongs are not designed to hold the plug in place

if it is plugged into a ceiling, under-the-table or

cabinet outlet.
Unplug this product from the wall outlet before

cleaning. Do not use liquid or aerosol cleaners.

Use a damp cloth for cleaning.
Do not cut off the power adapter to replace it with

other plug, as this causes a hazardous situation.
Do not allow anything to rest on the power cords.

Do not install this product where the cords may be

walked on or crimped.
This product should be operated only from the

type of power source indicated on the

marking

label. If you are not sure of the type of power

supply in your home, consult your dealer or local

power company.
Do not overload wall outlets or use an extension

cord.
Do not place this product on an unstable table,

shelf, stand or other unstable surfaces.
This product should not be placed in any area

where proper ventilation is not provided. Slots and

openings in the back or bottom of this product

are provided for ventilation. To protect them from

overheating, these openings must not be blocked

by placing the product on a soft surface such as

a bed, sofa or rug. This product should never be

placed near or over a radiator or heat register.
Never push objects of any kind into this product

through the slots because they may touch

dangerous voltage points or create a short circuit.

Never spill liquid of any kind on the product.

To reduce the risk of electric shock, do not

disassemble this product, but take it to an

authorized service facility. Opening or removing

parts of the product other than specified access

doors may expose you to dangerous voltages

or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently

used.
You should test the sound reception every

time you turn on the units or move one of the

components.
Periodically examine all components for damage.
Be aware of possible loss of privacy while using

public airwaves. Conversations may be picked

up by other nursery monitors, cordless phones,

scanners, etc.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.
19.

Important safety

instructions

Use only the baby unit power adapter
supplied with this product.
The baby unit power adapter is intended
to be correctly oriented in a vertical or
floor mount position. The prong are not
designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or
cabinet outlet.
Make sure the baby unit and the power
adapter cord are out of reach of children.

•

•

•

Connect the baby unit

1

Camera

2

Infrared LEDs

Backup light for night vision.

3

POWER on/off indicator

On when the baby unit is powered on

and currently linked to parent unit.
Flashes when the baby unit is not

linked to a parent unit; or

the pairing process is in progress; or

the parent unit is not viewing this baby

unit.

•

•

4

Power jack

5

Control key panel

/VOL+

Press to increase the listening volume.

/VOL-

Press to decrease the listening volume.

PAIR

Press and hold to pair to the parent unit.

(On/Off)

Press and hold to turn on or off.

6

Microphone

7

Stand

Tilt to adjust the camera angle.

8

Rim

9

Base

Overview

r

Baby unit

Power outlet not
controlled by a wall switch

Baby unit power adapter

Self-adhesive
strap

Part checklist

To keep this product working well and looking good,

follow these guidelines:

Avoid putting it near heating appliances and

devices that generate electrical noise (for example,

motors or fluorescent lamps).
DO NOT expose it to direct sunlight or moisture.
Avoid dropping the product or treating it roughly.
Clean with a soft cloth.
DO NOT immerse the baby unit in water and do

not clean them under the tap.
DO NOT use cleaning spray or liquid cleaners.
Make sure the baby unit is dry before you

connect them to the mains again.

•

•
•
•
•

•
•

General product care

Pair and replace extra new baby unit

Each newly purchased baby units (

VM310/

VM310-13

) must be paired to your video and

audio monitor system (

VM311

/

VM311-13/

VM311-2/VM311-23

).

You can pair a maximum of four baby
units to your parent unit.

Each new baby

unit must be paired to the parent unit
before use.
Make sure you power on the parent unit
before pairing.

To pair and replace a baby unit:

Press

MENU/

SELECT

when the parent unit is

not in use

.

Press or to choose

.

Press

or

to choose a desired baby unit

slot, then press

MENU

/SELECT

. The screen

displays .

If you choose an occupied baby unit slot,
the new baby unit will replace the existing
baby unit.

4. Press and hold on the new baby unit

until the

POWER

light flashes.

Then immediately press and hold

PAIR

until the

POWER

light turns on.

When pairing is successful, the screen displays

, and then the image from the newly paired

baby unit.

If pairing fails, the screen displays . Try
the pairing process again.
Only one baby unit can be paired at a time.

To unpair a baby unit:

Make sure you power on the baby unit and
the parent unit before unpairing the baby unit.

Press

MENU/

SELECT

when the parent unit

is not in use

.

Press or to scroll to .
Press or to select the desired baby unit

(1, 2, 3 or 4).
Press and hold

TALK

until and

display.
Press or to select to cancel, or to

confirm the unpair process.
Press

MENU

/SELECT

to confirm your selection.

When unpairing is successful, the

POWER

light on the selected baby unit flashes. The

parent unit displays for a while, and then the

image from the baby unit previously viewing.

•

•

1.

2.
3.

•

•

1.

2.
3.

4.

5.

6.

Before use

Positioning the baby monitor

Place the parent unit within the operating range
of the baby unit. We recommend the parent
unit is at least 3 feet away from the baby unit
to avoid audio feedback. If you still experience
audio feedback, move the parent unit and the
baby unit farther apart.

For better image quality, do not place the

baby unit too far away from your baby.

For desktop usage and/or wall mounting the

baby unit, you can refer to

Installation guide

.

Operating range

The operating range of the baby monitor is up
to 1,000 feet outdoors or 150 feet indoors. The
actual operating range may vary depending
on the environmental conditions and other
interferences such as walls, doors and other
obstructions.

Children should be supervised to ensure that they

do not play with the product.
The product is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

SAVE THESE INSTRUCTIONS

Cautions

Use and store the product at a temperature

betw

een 32

o

F and 104

o

F.

Do not expose the product to extreme cold, heat

or direct sunlight. Do not put the product close to

a heating source.
Make sure the baby unit(s) and the adapter

cord(s) are always out of reach of the baby, at

least 3 feet away from the baby or crib, to avoid a

possible strangulation hazard.
Never place the baby unit(s) inside the baby’s

crib or p

laypen. Never cover the baby unit(s) with

anything such as a towel or a blanket.
Other electronic products may cause interference

with your baby monitor. Try installing your baby

monitor as far away from these electronic devices

as possible: wireless routers, radios, cellular

telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and

cordless telephones.

Precautions for users of implanted cardiac

pacemakers

Cardiac pacemakers (applies only to digital cordless

devices):
Wireless Technology Research, LLC (WTR), an

independent research entity, led a multidisciplinary

evaluation of the interference between portable

wireless devices and implanted cardiac pacemakers.

Supported by the U.S. Food and Drug Administration,

WTR recommends to physicians that:

Pacemaker patients

Should keep wireless devices at least six inches

from the pacemaker.
Should NOT place wireless devices directly over

the pacemaker, such as in a breast pocket, when

it is turned ON.

WTR’s evaluation did not identify any risk to

bystanders with pacemakers from other persons

using wireless devices.

Electromagnetic fields (EMF)

This VTech product complies with all standards

regarding electromagnetic fields (EMF). If handled

properly and according to the instru

ctions in this

user’s manual, the product is safe to be used based

on scientific evidence available today.

20.

21.

1.

2.

3.

4.

5.

•

•