VTech MI6879 - Manual
VTech MI6879 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
STEP 3 Battery installation
1. Align the t wo holes in the plug with the socket pins,
then snap the plug into place. Place the battery in the
compartment with the wires in the upper right corner.
2. Replace cover by sliding it upwards until it clicks into
place.
STEP 4 Charge the battery
1. Place the handset in the telephone base.
Quick start guide
mi6879
STEP 2 Connect power to telephone base
Plug the power adaptor into an electrical outlet not controlled
by a wall switch, and the connector into the power jack on
bottom of the telephone base.
NOTE:
• Use only the power adaptors supplied with your
VTech telephone.
STEP 5 Connect to phone line
Plug one end of the telephone line cord into the telephone line
jack at the bottom of the telephone base. Then plug the other
end of the cord into the wall telephone outlet.
Telephone outlet
STEP 6 Making and receiving calls
Making a call
• Press
or
SPEAKER
and listen for dial tone.
Hanging up
Press
OFF
or place
the handset in its
telephone base.
IMPORTANT!
If your product is not working properly:
1. Refer to your user’s manual.
2. Visit our website at www.vtechphones.com or in Canada,
www.vtechcanada.com.
3. Call our customer service at 1-800-595-9511 or 1-800-267-
7377 in Canada.
STEP 7 Set the clock
1. Press
TIME/SET
to listen to the current setting.
2. Press
TIME/SET
again to indicate changes needed.
3. Press
CHANGE
to change the day, hour, minute, or year.
4. When you hear the correct setting, press
TIME/SET
to
advance to the next setting.
NOTE:
If you have caller ID service, the time will automatically
be updated with the first incoming call af ter you
program the year into the system.
NOTE:
For complete feature instructions, please refer to your
user’s manual.
AC power outlet
STEP 8 Record your outgoing announcement
1. Press
SETUP
, the system announces “
Announcement.
Press
PLAY
or press
RECORD
. To continue setup, press
SETUP
.
”
2. Press
REC/MEMO
and speak toward the
MIC
to record an
announcement for up to 90 seconds.
3. Press
PLAY/STOP
/
( when finished recording).
• Dial the phone number.
-OR-
• Dial the phone number.
• Press
.
Receiving a call
Press
,
SPEAKER
, or any dialing key except
OFF
.
STEP 1 Check package contents
Make sure your phone’s packaging includes the following:
Handset
Telephone line cord
Base power adaptor
Quick start guide
Belt clip
User’s manual
Wall mount bracket
Battery
96-006xxx-010-000
Telephone base
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
