VTech 9116 - Manual

Parts Check List:
1. Handset
2. Base Unit
3. Telephone line cord
4. AC adapter

INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

1. Remove the battery case by pressing

o n t h e r i d g e d l i n e s a n d s l i d i n g
downward.

2. Discard the old battery pack. Don't put

t h e o l d b a t t e r y p a c k i n a t r a s h
compactor or a fire - it could burst.

work is required, contact VTech Customer
Service at 1-800-595-9511. Opening or
removing cabinet parts other than specified
a c c e s s d o o r s m a y e x p o s e y o u t o
dangerous voltages or other risks. Incorrect
reassembling can cause electric shock
when the appliance is subsequently used.

11. Do not overload wall outlets and extension

cords as this can result in the risk of fire or
electric shock.

12. Unplug this product from the wall outlet:

a) When the power supply cord or plug is

damaged or frayed.

b) If liquid has been spilled into the product.
c) If the product has been exposed to rain

or water.

d) If the product does not operate normally

by following the operating instructions.
Adjust only those controls that are
covered by the operating instructions
because improper adjustment of other
controls may result in damage and will
often require extensive work to restore
the product to normal operation.

e) If the product has been dropped and

the cabinet has been damaged.

f)

If the product exhibits a distinct change
in performance.

13. Avoid using a telephone (other than a

cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lighting.

14. Do not use the telephone to report a gas

leak in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

When using your telephone equipment, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock and injury
to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked

on the product.

3. Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water (for

example, near a bath tub, kitchen sink, or
swimming pool).

5. Do not place this product on an unstable cart,

stand, or table. The product may fall, causing
serious damage to the product.

6. Slots and openings in the cabinet and the

back or bottom are provided for ventilation.
To protect it from overheating, these openings
must not be blocked by placing the product
on the bed, sofa, rug, or other similar surface.
This product should never be placed near or
over a radiator or heat register. This product
should not be placed in a built-in-installation
where proper ventilation is not provided.

7. This product should be operated only from

the type of power source indicated on the
marking label. If you are not sure of the type
of power supply to your home, consult your
dealer or local power company.

8. Do not allow anything to rest on the power

cord. Do not locate this product where the
cord will be abused by persons walking on it.

9. Never push objects of any kind into this

product through cabinet slots as they may
touch dangerous voltage points or short out
parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the
product.

10. To reduce the risk of electric shock, do not

disassemble this product. If service or repair

IMPORTANT: Do not dispose of this battery

in household garbage. For
information on recycling or
p r o p e r d i s p o s a l , c o n s u l t
y o u r l o c a l s o l i d w a s t e
c o l l e c t i o n o r d i s p o s a l
organization.

3. Hold the battery pack and plug the cord

into the handset. (The two cord metal
tips on the white plastic end of the plug
should be facing upwards.) Place the
cord in the case so it rests on top of the
battery pack.

4. Replace the battery cover by sliding it

into place.

5. The new battery pack must be charged

before using your telephone. Place the
handset in the cradle of the base unit to
allow it to charge for 24 hours. Maximum
battery life between charges is more
than 5 hours of continuous talk time or
4 days of standby.

CAUTION: To reduce the Risk of Fire or

Injur y to Persons, Read and
Follow these instructions:

1. Use only VTECH battery.

1

3

2

REPLACING THE HANDSET BATTERIES

5. Battery Pack
6. Wall mounting bracket

7. Belt Clip

2. Do not open or mutilate the battery.

Released electrolyte is corrosive and
may cause damage to the eyes or
skin. It may be toxic if swallowed.

3. Exercise care in handling batteries in

order not to short the battery with
conducting materials such as rings,
bracelets, and keys. The battery or
conductor may overheat and cause
burns.

4. Do not dispose of the battery in a fire.

The cell may explode.

TELEPHONE LINE

CORD

WALL MOUNTING

BRACKET

BASE UNIT

HANDSET

AC ADAPTER

BATTERY PACK

BELT CLIP

PAGE

CHARGING

VTECH

VTECH TELECOMMUNICATIONS LTD

Printed in China 91-5141-11-00 ISSUED 0

To help protect the environment, this

product may contain recycled or

reconditioned parts and materials.

MHz

USER’S MANUAL

HEADSET CAPABLE (2.5mm) 900MHz HIGH FREQUENCY