Page 2 - CONTENTS
Important Safety Instructions............1 BEFORE YOU BEGIN ........................2About Caller Identification ................. 2Par ts Check List ............................... 2 INSTALLATION ................................3Before You Install ............................. 3Table/Desk Installat...
Page 3 - VTECH COMMUNICATIONS INC; SAVE THESE INSTRUCTIONS; Important Safety Instructions
basic safety precautions should alwaysbe followed to reduce the risk of fire, electric shock and injury to persons, including thefollowing:1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall outlet before cleaning...
Page 4 - BEFORE YOU BEGIN
Enhanced 2.4GHz Technology - Dual Band transmission combines the best of 2.4GHz and 900MHz technologies, providing enhanced performance over standard cordlesstelephones. About Caller Identification (Caller ID)This product has a Caller ID with Call Waiting feature that works with service from your lo...
Page 5 - To attach; INSTALLATION
Before You Install1. Choose a location for the Base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110v AC)not controlled by a wall switch. Plug the AC power adaptor into the electrical outlet andthe DC connector to the ...
Page 6 - Table/Desk Installation
television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Table/Desk Installation CONNECT THE POWER CORD CONNECT THE TELEPHONE LINE CORD Standard electrical outlet Modular telephone jack 4 . Charge the handset battery. Place the handset in the base. Charge the battery for at ...
Page 7 - TELEPHONE OPERATION; Cancel a page
TELEPHONE OPERATION 5 Answer a CallPress any keyexcept OFF HoldPress to put a callon hold, pressagain to releasehold OR Lift theHandset of anextension Make a CallPress PHONEthen dial thenumber OR Dialthe number (useto backspace andcorrect digits),then pressPHONE to call Flash/Call WaitingAccess spec...
Page 9 - Press SELECT to choose the displayed ringer setting.; . This is useful if you
Handset Ringer Style/Battery SaveYou can select from four different handset ringer styles, or turn the ringer off andextend the battery life. 1 Make sure the handset is off.2 Press PROG/CHAN to enter programming mode.3 Press until the screen displays RINGER: . 4 Press SELECT The screen displays the ...
Page 10 - Display Screen Messages
Operating RangeThis cordless telephone operates within the maximum power allowed bythe Federal Communications Commission (FCC). Even so, this handset andbase can communicate over only a certain distance — which can vary withthe locations of the base and handset, the weather, and the construction ofy...
Page 11 - Store a Number or Name in Memory; Press MEM. The screen displays; Presses; Enter the telephone number. Use; TELEPHONE MEMORY
This cordless phone can store 10 telephone numbers with names, each up to 16 digitslong in memory locations you assign (0-9).Note: Press OFF at any time to exit memory dial mode. Store a Number or Name in Memory 1 Press PROG/CHAN, then press until the screen displays MEM DIAL . 2 Press MEM. The scre...
Page 13 - Store a Number/Name in the Directory; Press SELECT . The screen displays; Enter the telephone number. Use; TELEPHONE DIRECTORY
This cordless phone can store 40 telephone numbers with names, each upto 16 digits long. Entries are stored alphabetically. For consistency withCaller ID entries, you may wish to enter last names first.Note: Press OFF at any time to exit directory. Store a Number/Name in the Directory 1 Press PROG/C...
Page 14 - Delete a Number/Name Stored in the Directory
8 Press SELECT or PROG/CHAN to confirm your selection. If you chose Y , a D will be displayed with the directory entry. Note: When memory is full the screen displays MEMORY FULL , an error tone sounds, and you will not be able to store a new number until you delete a stored number.Edit a Number/Name...
Page 15 - CALLER ID OPERATION; Delete Records from Call History; Delete a Specific Call
CALLER ID OPERATION About Call HistoryThis phone assigns each incoming call a number from 1 to 99. The most recent call willhave the highest number. When the memory is full, the oldest call information is deletedto make room for new incoming call information.For each call that comes in, the screen d...
Page 16 - Store a Call History Record in the Directory
4 Press or until YES flashes. 5 Press SELECT. You will hear a series of beeps confirming the deletion. NOTE: If there are new CID records not yet reviewed , the “ ALL” option will not bedisplayed as a selection.Dial a Displayed Number 1 Locate the record in call history that you want to dial.2 If yo...
Page 17 - Charge the Handset Battery Pack; • The battery pack needs charging when:; and the low battery icon.; Replacing the Handset Battery Pack; indentation and sliding the cover downward.; BATTERIES
Charge the Handset Battery Pack • This battery should remain charged up to six days with the ringer turned on andup to 12 days with the ringer off. A fully charged battery provides an average talktime of about six hours. • The battery pack needs charging when: — A new battery is installed in the han...
Page 18 - interference, move away from the microwave; If you hear a two-beep signal when you try to use the handset:; of them to ring. Try unplugging some of them.; If you hear noise or interference when using the phone:; IN CASE OF DIFFICULTY
If you have difficulty operating this phone, try the suggestions below.For Customer Service, call 1-800-595-9511. Please retain your receipt as your proofof purchaseIf the phone doesn’t work at all, check these items first: • Make sure the AC adapter is plugged into an outlet not controlled by a wal...
Page 19 - the base to another location, preferably on an upper floor.; If you hear other calls while using your phone:; until the screen displays MESSAGES WAITING .
IN CASE OF DIFFICULTY 17 • Using the handset near household appliances (microwaves, computers, television, stereos, etc.) can sometimes cause interference. Move away from applianceswhile using the handset. • The layout of your home or office might be limiting the operating range. Tr y moving the bas...
Page 20 - Maintenance
Taking Care Of Your TelephoneYour GIGAPHONE cordless telephone contains sophisticated electronic parts, so itmust be treated with care.Avoid rough treatmentPlace the Handset down gently. Save the original packing materials to protect yourtelephone if you ever need to ship it.Avoid waterYour telephon...
Page 21 - Warranty Statement
Warranty Statement What does this limited warranty cover?• The manufacturer of this VTECH product, VTECH Communications, warrants to the holder of a valid proof of purchase ("Consumer" or "you") that the product and all accessoriesprovided by VTECH in the sales package ("Product&...
Page 22 - What must you return with the Product to get warranty service?
the user's manual, A check of the Product controls and features may save you a servicecall. • Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling chargesincurred in the transport of Product(s) to t...
Page 23 - FCC and IC Regulations
This equipment complies with Parts 15 of the Federal Communications Commission(FCC) rules for the United States. It also complies with regulations RSS210 and CS-03of Industry and Science Canada. Operation is subject to the following two conditions: (1)this device may not cause interference, and (2) ...
Page 25 - The RBRCTM Seal; Memory locations
The RBRC™ Seal The RBRC ® Seal on the nickel-cadmium batterycontained in our producti n d i c a t e s t h a t V Te c hCommunications, Inc. isvoluntarily par ticipating in an industry program to collect andrecycle these batteries at the end of theiruseful lives, when taken out of servicewithin the Un...
Page 26 - ISSUE 0
