VocoPro IR-9000 - Manual

And Thank you for purchasing the IR-9000 from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual ...

7 Getting Started When unpacking your IR-9000 we recommend that you keep the original receipt or invoice, box and packing materials in case the product ever needs to be shipped for warranty repair or any other purpose. Warranty Information The IR-9000 is covered under a 1-Year Limited Warranty. For ...

8 Getting Connected Connecting the Power Supplies The IR-9000 includes two power supplies, one for the receiver unit (AC 110V) and one for the microphone charger (AC 110V). Surge Protector Recommended VocoPro recommends that you use a surge protector with all of your products to prevent damage cause...

9 Connecting to a Mixer, amplifi er or other audio input device The IR-9000 allows you to either connect each microphone channel individually to separate channels using the CH.1 and CH.2 outputs (Fig. C) or both microphone channels together through the MIXED output (Fig. D). Connecting Each Microphon...

11 Turning on the IR-9000 Receiver Unit Make sure all cables and power supplies are connected correctly and firmly. 1. Press the power switch ON to turn the power on2. Press the power switch OFF to turn the power off Microphones 1. Slide the power switch to the ON position to turn the power on2. Slid...

12 Receiver Front Panel 1. Power switch - Turns the receiver unit’s power on and off 2. Infrared Sensor - This is the built-in infrared sensor. Make sure there is a clear path between the microphones and this sensor. For increased signal strength you can add up to two external infrared sensors. See ...

13 Microphone 1. Power Switch - Turns the microphone’s power on and off 2. Power indicator LED - Indicates when the microphone’s power is on. 4. IR Transmitter - This lens emits the infrared signal to the sensor on the receiver. Note: Keep hands away from this part of the microphone, as it may block...

14 Troubleshooting There is no power • Make sure the correct power adapter is connected to the reciever • If using a surge protector / power strip, make sure it is plugged in and switched on • Make sure all power connections are fully connected There is no sound or the sound is unclear • Make sure a...

15 Technical Specifications Transmitter Working Voltage: DC 2-3VWorking Frequency: A: 2.08MHz, B: 2.54MHzContinuous working time: 5hr Receiver Power Consumption: 7WAudio Output: 600 Ω /300mV S/N:>100dBFrequency response: 45Hz-15KHz ± 3dBWorking Distance(forward): >10mWorking Range: >30m² Pow...