VocoPro DVG-909K - Manual

5 Listening for a lifetime Selecting fine audio equipment such as the unit youʼve just purchased is only the start of your musical enjoyment. Now itʼs time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Associationʼs Consumer Elec...

6 Specifications Supported Disc Formats: DVD, MPEG-4, MPEG-4 +G, CD+G, SVCD, VCD 2.0-3.0, MP3, CD, CD- R/RW,PHOTO-CD. Video System: NTSC (525/60, 625/50) PAL (625/50, 525/60) Power Supply: 100-260V AC, 50/60Hz Video Output Level: 1Vp-p YUV Video Output: 1Vp-p Audio System: B/G, D/K, M/N Digital Outpu...

7 Use the DVG-909K’s built-in mounting brackets to mount it into a 19” rack case. The DVG-909K player requires 4 RUs of available rack space. Mounting the DVG-909K player Into a Rack Case To mount, carefully place the DVG-909K player in the rack space of your case. The DVG-909K takes 4 screws to mou...

8 Getting connected AUDIO CONNECTIONS The DVG-909K can be used as both a home entertainment DVD player and a Karaoke player/mixer. Since DVD audio is optimal with a digital connection (especially if you have an AC-3 or DTS receiver), it is common for the audio connection to be either Coaxial or Digi...

9 Connecting to a 2-Channel Stereo Receiver/Mixer/TV When connecting to the 2-channel L/R audio inputs on a stereo receiver or TV, the DVG-909K gives you the option of outputting both disc players independently or together through the Mixed audio output. Connecting each disc player independently (Fi...

10 Getting connected cont. VIDEO CONNECTIONS Connecting to a TV or video mixer with an RCA Connection When connecting to the RCA (yellow) video input on a TV or video mixer, the DVG-909K gives you the option of outputting both disc players independently (Fig.A) or together through the Switched Video...

11 Connecting to a TV with S-Video Using an S-Video cable, connect one end to the DVG-909K’s S-VIDEO OUTPUT jack and connect the other end to theS-VIDEO IN jack on your television. Connecting to a TV with Component Video Using 3 appropriate Component Video cables (usually color coded red, blue and g...

12 MICROPHONE CONNECTIONS The DVG-909K has three individual microphone channels, each with their own Volume and HI/LOW EQ controls. Each channel has both unbalanced 1/4” and balanced XLR mic inputs. NOTE: For each channel you cannot be connected to both 1/4” and XLR inputs, you must be connected to ...

13 Front panel controls and functions 1. DIRECT TRACK ACCESS buttons – These buttons allow for DIRECT TRACK selection. 2. DISPLAY panel - Displays graphical information on the DVG-909K’s operating status. 3. POWER ON/STANDBY button - Use this button to turn the DVG-909K ON or put it in STANDBY mode....

14 Front panel controls and functions cont. 17. DIGITAL KEY CONTROL - These buttons direct the DIGITAL KEY CONTROLLER to shift the KEY of the SOURCE MUSIC either UP or DOWN. # - Raises the musical key a half step each time it is pressed. - Resets the musical key to it’s original key. b - Lowers the ...

15 Rear panel controls and functions 1. 5.1 CH. AUDIO OUTPUT jacks - These jacks are for connecting to 5.1 channel ready amplifiers/receivers. The labels on each jack specify which speaker in your surround sound system to output to. CENT - center, SW - subwoofer, SL- surround left, SR - surround righ...

16 Remote control functions 1. OPEN/CLOSE button – Press to OPEN and CLOSE the disc tray. 2. POWER button – Press to turn the DVG-909K ON/ OFF. 3. NUMBER pad - Press to select a track or file for direct playback. 4. LANGUAGE button - This button switches between the different LANGUAGES in a DVD that ...

17 22. CLEAR button - This button clears any programming that has been done in PROGRAM mode. 23. MUTE button - Press to silence audio playback. Video playback is not affected while using the menu feature. 24. MUSIC VOLUME buttons - Use these buttons to increase and decrease the volume of the disc pl...

18 Installing the batteries First remove the battery compartment lid from the back of a remote control. Insert two AAA batteries, ensuring that the polarities are aligned correctly. Signs that the batteries need to be changed include: - The remote only works when held closer to the player than usual...

19 1. EJECT button - Opens and closes the disc tray 2. DISPLAY panel - Displays graphical information on the DVG-909K’s operating status 3. DIRECT TRACK ACCESS buttons – These buttons allow for DIRECT TRACK selection. 4. DIRECTIONAL/ENTER buttons - These buttons allow you to navigate through the DVD...

20 Basic operations Preparing to Play a Disc or Discs Turning on the Power Turn on the DVG-909K’s power by pressing the POWER button on the player or on the remote. NOTE: Be sure that the power cord is plugged in and that the master power switch on the back of the player is switched to the ON positi...

21 Using Direct Track Access You can use the Direct Track Access feature to jump di- rectly to a track, song or chapter (DVD movie) by entering its number. Direct Track Access works while a disc is in stop mode or while a disc is playing. To access a track, simply press the number of that track usin...

22 Repeating a Segment Using the A-B Feature Press the A-B (SHIFT +A-B) button The starting point of the LOOP region is immediately commenced after pushing A-B. Press the A-B button again to establish the LOOP ending point. To cancel the loop Press the A-B button a third time. NOTE: You cannot searc...

23 Karaoke operations Using Digital Key Control Digital Key Control lets you raise and lower the key of the music to best fit a singer’s vocal range. Use the Digital Key Control buttons on the player or on the remote to change the key of a song. - b (FLAT) - Will LOWER the key of the music a ½ step. ...

24 DVD operations Accessing the DVD Menu To return to the DVD menu while the movie is showing, simply press the MENU button on the remote control Changing Angles When playing a DVD with multi-angles recorded, you can select the angle you want to view. During playback, when a multi-angle scene comes ...

25 MP3 Operations MP3 Playback Load an MP3 disc The disc will automatically load and display the MP3 window. It may take up to 20 seconds for an MP3 disc to be read depending on the complexity of the file structure. Navigating through the Mp3 Menu Use the arrow keys on the remote control to navigate ...

26 Setting up preferences Press SETUP on the remote control or on the DVG-909K’s front panel to get into the SETUP menus. All settings have been preset in the DEFAULT mode. This means that the most common settings will already be active when you first setup the DVG- 909K. It may not be necessary to m...

27 SPEAKER SETUP 1. DOWNMIX LT / RT: When connecting to a Dolby Digital amplifier. STEREO: When connecting to a stereo TV or amplifier and the disc supports 2-channel output. 5.1CH: Choose this setting to output the 5.1-channel sound. NOTE: You must turn KARAOKE MODE off (see the KARAOKE SETUP page) i...

28 AUDIO SETUP 1. SPDIF OUTPUT OFF: Turns off the SPDIF output. ON: Turns on the SPDIF output. NOTE: Only turn on the SPDIF digital output when you are using a digital audio processor. Some digital audio processors will require you to select an LPCM output frequency. 2. OP MODE Choose between these ...

29 Setting up preferences cont. PREFERENCES PAGE 1. TV DISPLAY TV Display Modes: You can select one of the following TV display modes for the video output: NORMAL/PS: When the player is connected to a normal (4:3) TV and a wide picture is shown on the full screen, a por- tion may be cut off automati...

31 Problem The power does not come on A disc does not play or playback stops immediately. No picture The picture is bad Possible Cause -The power cord many not be loose -Your power strip/surge protector may be defective or switched OFF - There may be condensation or dust in the disc player. -The dis...

32 Problem No Sound The remote control does not work properly or at all Possible Cause - Are the audio connections attached and firmly connected? - - Is the connected audio equipment turned on? Is the volume set correctly? - Are the remote control batteries in- stalled correctly? - The remote contro...