VocoPro Club-8000 - Manual
VocoPro Club-8000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Setting up the speakers and speaker stands; NOTE: Each end of the SS-88 pole has a particular diameter; Connecting Power; product for setup instructions.; MAKE SURE ALL PRODUCTS ARE POWERED OFF; CDG-9000 PRO remote unit to the player unit
- Page 3 – You can do this using either
- Page 4 – Adding the VSP-M1 to the CLUB-8000 system
This quick reference guide is provided to help you set up your
CLUB-8000
system for the first time. It contains instructions
on setting up the products that are included in the
CLUB-
8000
. If you are connecting any additional gear that is not
included in the
CLUB-8000
, refer to the appropriate manuals
for detailed instructions.
CDG-9000 PRO
• 1 Control interface connector wire
• [1] Instruction Manual
KJM-8000+
9-Channel Digital Key Control KJ/DJ Mixer
• [1] Instruction Manual
VP-2100 PRO 2000W
Professional Power Amplifier
• [1] Instruction Manual
VX-15
Vocal Speakers
• [4] VX-15 speakers
Gathering Package Contents
The first step to putting together your new
CLUB-8000
system is unpacking all of the necessary equipment. Remem-
ber to keep your manuals nearby when setting up, as you may need to reference them. The products listed below are
included in the
CLUB-8000
system:
VSP-M1
Multi-Effect Digital Signal Processor/Mixer
• 1 Instruction manual
SS-88
Speaker Stands
• [4] SS-88 speaker stands
CLUB-8
Road Case
• [1] CLUB-8 road case
• [1] Rolling cart
• [2] MK-38 PRO microphones
• [1] Gooseneck DJ light
• 1 RCA to 1/4” Patch Cable (3.3 ft paired)
• Rack-mounting screws
Mounting components into the CLUB-8
Follow these basic guidelines when mounting:
• Always screw in the mounting screws using an “X” forma-
tion.
• If possible, to keep the products cooler, leave some space in
between the components in the rack.
CDG-9000 PRO CONTROLLER
KJM-8000+ MIXER
CDG-9000 PRO PLAYER
VP-2100 PRO AMPLIFIER
Below is one way to configure your CLUB-8000:
1
2
4
3
On the web at
www.vocopro.com
or call toll free
1-800-678-5348
Quick Reference Setup Guide
CLUB-8000
Quick Start
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Setting up the speakers and speaker stands 1. Setup each SS-88 speaker stand by extending the support legs to a position that is stable and tighten the tension mecha- nism firmly. 2. Place a VX-15 speaker on top of the SS-88 so that the shaft of the SS-88 fits flush into the mounting cavity on the bott...
CDG-9000 PRO player unit to KJM-8000+ You have the option of either connecting each deck of the CDG-9000 PRO separately (Fig. 1) or together through a single SWITCHED output (Fig. 2). Separately through individual deck outputs (Fig.1) Using RCA cables: 1. For each deck, connect the L/R (red & wh...
VP-2100 PRO to VX-15 speakers Speakers 1 and 2 Using the SPEAKON style to ¼” adapter and ¼”(m) to ¼”(m) cable (included): 1. Connect the SPEAKON style end to CH.1 on the rear panel of the VP-2100 PRO 2. Connect one end of the ¼” cable to the ¼” end of the adapter 3. Connect the other end of the ¼” c...
