VocoPro CDG-X3P - Manual

7 Getting connected Connecting the CDG-X3P to a Television/Monitor 1. Connect one end of the RCA cable to the VIDEO OUTPUT on the rear panel of the CDG-X3P 2. Connect the other end of the RCA cable to the RCA video input on your Television Monitor. NOTE: If your television does not have an RCA type ...

8 Getting connected cont. Connecting the CDG-X3P to a Microphone IMPORTANT! Before connecting a microphone, be sure the power is off or the volume is turned all the way down. When the microphone is plugged in and the unit is on do not point the microphone toward the speakers or leave an unattended m...

10 Front panel controls and functions 1. POWER button - Turns on the power to the CDG-X3P. 2. TAPE COUNTER - Use the tape counter when playing or recording cassettes to keep track of your location on the tape. 3. OPEN/CLOSE button - To open/close the disc tray. 4. RESET button - Push the reset butto...

11 Front panel controls and functions cont. 12. B-SCAN - Press this button to scan the song selection in reverse. This feature works the same as the “rewind” key on a cassette deck. The difference between this feature and the “PREV” selection control button is this feature reverses the CDG within th...

14 Rear panel controls and functions 1. AC POWER CORD - Plugs into any AC wall outlet. 2. FUSE - IMPORTANT! If the fuse blows out it’s a good indication that there may be a short in the system. DO NOT REPLACE THE FUSE! Doing so could possibly cause additional damage to the unit. Take your CDG-X3P to...

15 Remote control functions Using the Remote Control The CDG-X3P comes with a handy remote control to al- low the user to operate the Karaoke functions from up to twenty-five feet from the unit. The remote control offers the user fast forward, rewind, skip, search, program- mable memory, play/pause, ...

16 Installing the batteries First remove the battery compartment lid from the back of a remote control. Insert two AAA batteries, ensuring that the polarities are aligned correctly. Signs that the batteries need to be changed include: - The remote only works when held closer to the player than usual...

17 Basic operations Turn on the CDG-X3P 1. Locate the power switch on the front of the CDG-X3P player. Press the power switch once to turn on the machine. 2. Locate the “CDG” button below the CDG tray. This selects the mode you will use the player in. 3. Carefully increase the volume by turning the ...

20 Troubleshooting Problem Possible Cause Solutions PROBLEM POSSIBLE CAUSE(S) SOLUTION(S) No video signal. Words don’tappear on the TV monitor. Be sure the television is setto the “VIDEO” mode (see yourtelevision’s owners manual). T h e t e l e v i s i o n m a y n o t b eswitched to the proper video...