Vizio SB-38W - Manual
Vizio SB-38W – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Vertical
- Page 3 – ,000 W continuous pink noise; Weight; Accessories; Instruction manual: 1; Note; Installation Examples; screws are attached to the speaker unit.); connect the black cable to the black terminal.; Replace the rear board by screwing at 20 places.; Mounting the Low-Frequency Loudspeaker; Mounting the Dividing Network; Installing the Enclosure
- Page 4 – Standard Speaker System GS-3806W; Components Configuration; SAORI Setting; Since the level setting value is set to standard values which; Appearance; When suspending this speaker, make sure to suspend it after
- Page 5 – Standard Speaker System GS-386W; Suspending the GS-386W
- Page 6 – TOA Corporation
- Page 7 – WARNING
- Page 8 – TOA
PROFESSIONAL SOUND SYSTEM
Instruction Manual
Low Frequency Enclosure
Model SB-38W
APPEARANCE
Stands f o r the position of the gravity
center when two speaker units(HLS38UL-
8) are installed inside.
Note:Be sure to install each speaker unit from
the inside of the enclosure baffle board.
1. Punched-metal grille
2. Enclosure
3. Nut for horn mounting bracket
(HY-940/HY-M94)
4. Hole for suspension kit(HY-700)
5. Rear board
6. Terminal panel
7. Input terminal
FEATURES
1. Low frequency, vented(bass-reflex) enclosure for permanent installation.
2. Creates a woofer system that reproduces low frequencies with high efficiencies when two
HLS38UL-8 woofers are mounted. The tuning frequency is 45 Hz.
3. Each speaker is mounted to the baffle board from the rear of the enclosure, facilitating
maintenance after installation.
4. Creates a wide-range, high-efficient standard speaker system(GS-3806W or GS-386W)
when used in conjunction with a LE-940 or LE-M94 CD horn, a HFD-260-8 compression
driver and two HLS38UL-8 woofers.
5. It is possible to suspend the SB-38W with the optional HY-700 suspension kit.
6. It is easy to mount the LE-940 or LE-M94 to the enclosure with the optional HY-940 or HY-
M94 horn mounting bracket when the standard speaker system is configured.
7. Large input screw terminal.
8. A protective punched-metal grille.
9. Finished with paint(dark gray).
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Characteristic Diagrams(Assembled Two HLS38UL-8 Low-Frequency Loudspeakers) Frequency Response • Impedance Curve Harmonic Distortion Measured at 100 watts (-10dB power), 1 meter. Measured in an anechoic environment at 1 watt and 1meter. Coverage Angle vs Frequency(-6dB) Directivity Factor(Q) vs Freq...
Specifications(Assembled Two HLS38UL-8 Low-Frequency Loudspeakers) Enclosure: Vented(bass-reflex) type Tuning Frequency: 45 Hz Applicable Speaker Unit: HLS38UL-8X2 Nominal lmpedance: 4 ohms Power Handling 1 : 1,000 W continuous pink noise Sensitivity 2 : 101 dB(1W/1m) Frequency Range: 40 Hz~3,000 Hz...
Standard Speaker System GS-3806W Components Configuration SB-38W: Low-frequency enclosure HLS38UL-8×2: Low-frequency speaker unit LE-940: Constant directivity horn HFD-260-8: Compression driver HY-940: Horn mounting bracket Note The HNW-500 dividing network is required when driving the speaker syste...
