Page 3 - Welcome; Thank You for Choosing ViZio; When reading This Manual
Welcome Thank You for Choosing ViZio And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged pa...
Page 6 - dTV TransiTion adVisorY
dTV TransiTion adVisorY The nationwide switch to digital television broadcasting was complete on June 12, 2009. Analog-only television sets that receive TV programming through an antenna now need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they ...
Page 7 - TeleVision anTenna ConneCTion ProTeCTion
TeleVision anTenna ConneCTion ProTeCTion If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical...
Page 8 - Table of Contents
Table of Contents 1 Installing the TV ................................................ 3 Inspecting the Package Contents ..................................... 3Installing the TV ................................................................... 3 Installing the TV Stand ...............................
Page 10 - Installing the TV; InspecTIng The package conTenTs
3 Installing the TV InspecTIng The package conTenTs Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. Remote Control with Batteries Quick Start Guide VIZIO LCD HDTV InSTaLLInG THe TV after removing the TV from ...
Page 14 - Controls and Connections; ReaR Panel
2 7 Controls and Connections ReaR Panel Rear Panel Coaxial - Connect coaxial cable from cable, satellite, or antenna. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. Stereo Audio Out - Connect 3.5mm audio device, such as sound bar. HDMI - Connect HDMI device. PC ...
Page 15 - Side Panel
2 8 Side Panel Side Panel POWER - Turn TV off or on. MENU - Open the on-screen menu. CHANNEL UP/DOWN - Change the channel. VOLUME UP/DOWN - Increase or decrease volume level INPUT - Change input source.
Page 16 - FRont Panel
2 9 FRont Panel Front Panel REMOTE SENSOR When using the remote, aim it directly at this sensor.
Page 17 - Remote ContRol
2 10 Remote ContRol Remote Control inPut Change the currently-displayed input. aRRow Navigate the on-screen menu. exit Close the on-screen menu. CloSed CaPtionS Open the closed caption menu. a/V ContRolS Control USB photo viewer. wide Switch the display mode. mute Turn the audio off or on. BaCk Go t...
Page 19 - Connecting Your Devices; ConneCting A DeviCe; BeSt
3 12 Connecting Your Devices ConneCting A DeviCe CONNECTING A DEVICE BeSt HDMi CABLe • DIGITAL • HD VIDEO (1080p)* • HD AUDIO BetteR CoMPonent CABLe • ANALOG • HD VIDEO (1080i)* • STEREO AUDIO * Maximum Resolution gooD Av CABLe • ANALOG • VIDEO (480i)* • STEREO AUDIO Game Console Cable/Satellite Box...
Page 20 - ConneCting A PC
3 13 CONNECTING A PC ConneCting A PC VGA Cable (For Video) 3.5mm Cable (For Audio) Your TV can be used to display output from a personal computer. To use your TV as a PC display: 1. Connect a VGA cable (not included) to your PC and the RGB port on the back of the TV. This cable transmits video. 2. C...
Page 21 - CONNECTING AN AUDIO DEVICE; gooD
3 14 CONNECTING AN AUDIO DEVICE Home Audio Receiver VIZIO Sound Bar CONNECTING AUDIO DEVICE 3.5mm Cable Optical/SPDIF Cable gooD BetteR Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has an audio port that matches an available port on the TV ...
Page 22 - Completing the First-Time Setup
4 15 Completing the First-Time Setup The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use. Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. ...
Page 23 - Using the On-Screen Menu; NavigatiNg the ON-ScreeN MeNU; OK
5 16 Using the On-Screen Menu Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the MENU button on the remote. From this menu, you can: • Change the input source• Change the screen aspect ratio • Set up closed captioning• Activate the sleep timer • Adjust the picture ...
Page 25 - SettiNg Up clOSed captiONiNg
5 18 SettiNg Up clOSed captiONiNg Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. If the program you are viewing is not being broadcast with closed captions, the TV will not display them. To activate or deactivate c...
Page 30 - adjUStiNg the aUdiO SettiNgS
5 23 adjUStiNg the aUdiO SettiNgS To adjust the audio settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK . The Audio Settings menu is displayed. 3. Use the Arrow buttons to highlight the setting yo...
Page 32 - chaNgiNg the tv SettiNgS
5 25 Resetting the Audio Settings To reset the audio settings to the factory default settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the Audio icon and press OK . The Audio Settings menu is displayed. 3. Use the A...
Page 39 - USiNg the help MeNU
5 32 Adjusting the CEC Settings The CEC function on your TV enables you to control HDMI-connected devices with the included remote without any additional programming. Not all HDMI devices support CEC. See your device’s user manual for details. To enable, disable, or adjust CEC settings: 1. Press the...
Page 42 - USiNg the iNfO WiNdOW; Program Description
5 35 USiNg the iNfO WiNdOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote: • Press the INFO or GUIDE button one time to display channel and input information. • Press the INFO or GUIDE button two times to display the program title and closed captioning informatio...
Page 43 - Using the USB Media Player; USing the USB Photo SlideShow
6 36 Using the USB Media Player USing the USB Photo SlideShow The USB port on your TV allows you to connect a USB thumb drive and view a photo slideshow. Connecting a USB Thumb Drive to the TV 1. Turn the TV off. Connect your USB thumb drive to the USB port on the back of the TV. 2. Press the Power/...
Page 45 - Troubleshooting & Technical Support; do you have questions?; L e t u s he L P !; youR PRoduCt inCLudes FRee LiFetiMe teCh suPPoRt; Hours of operation:
A 38 Troubleshooting & Technical Support do you have questions? L e t u s he L P ! youR PRoduCt inCLudes FRee LiFetiMe teCh suPPoRt Phone: Email: Web: (877) 878-4946 (TOLL-FREE) [email protected] www.VIZIO.com/support Hours of operation: Monday - Friday: 5 aM TO 9 PM (PST) Saturday - Sunday:...
Page 48 - Specifications
B 41 Specifications E420VSE Screen Size: 42” Class Viewable Area: 42.00” Dimensions w/ Stand: w/o Stand: 38.74 x 25 x 8.78” 38.74 x 23.49 x 2.40” Weight w/ Stand: w/o Stand: 40.34 lbs 33.07 lbs TV Type: Edge-Lit LED Refresh Rate: 60 Hz Maximum Resolution: 1920 x 1080 Pixel Pitch: .4845 mm x .4845 mm...
Page 50 - Limited Warranty
C 43 Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of...
Page 52 - MODELS
MODELS // E3D320VX // E3D420VX // E3D470VX © 2012 VIZIO INC. All rIghts reserVed. 120921OC-A